Gripper <strong>Chains</strong> www.bergab.ru Берг АБ bergab@ya.ru Тел. (495)-228-06-21, факс (495) 223-3071 • to lift , to lower, to turn over (rinsing machines) • for bottles, tins, jars, boxes, cartons, bundles, parcels, industrial components • up to 60 mt/min. conveying speeds • soft rubber gripper elements (to avoid product damaging) www.bergab.ru Берг АБ bergab@ya.ru Тел. (495)-228-06-21, факс (495) 223-3071
R Gripper <strong>Chains</strong> www.bergab.ru Берг АБ bergab@ya.ru Тел. (495)-228-06-21, факс (495) 223-3071 Series 1874 G. <strong>Chains</strong> fitted with steel top plates to be used in abrasive and heavy duty conditions or in case of high temperatures. The base is a standard roller chain Side Bow ANSI 63 SB (pitch 19,06 mm). The gripper elements are available in the “GD” type (Smooth pad) and “GJ” (Grooved pad). They are clipped on and easily replaceable . The clip for the TAB guide is welded on the top plate. Series 1843 G. The thermoplastic top plates other than providing a quieter and smoother operation, make it possible to reduce the plant weight, increase conveying speed and permit dry service. The gripper elements are available in the “GD” type (Smooth pad) and “GJ” type (Grooved pad). They are clipped on and easily replaceable. The base is a standard roller chain Side Bow ANSI 43 SB (pitch 12,7 mm). It is recommended for the conveying of ampoules, test tubes and other minute products such as small industrial components. 1874 G Sideflexing: Steel and Stainless Steel Top Plates, 19.05 mm 3/4” Pitch Rexnord Chain No. 1874-K363GD 1874-K363GJ 1874A-K363GD* 1874A-K363GJ * Ultimate Strgth. N Base Chain TopPlate 27000 Steel Steel 27000 Steel Material Stainless Steel Width K mm Radius min. R mm 92,1 381 34,1 GC Straight Curve mm mm 34,9 92,1 381 34,1 34,9 Weight kg/m 5,6 5,6 44,4 27 GD GJ 1874SS-K363GD 1874SS-K363GJ 21000 Stainless Steel Stainless Steel * = Available upon request and minimum order quantity. EPDM rubber gripper elements (black). 50 shore A hardness. White grippers available upon request. Standard length: 160 pitches 10 ft (3.048 m) 92,1 381 34,1 34,9 See page 93 Standard ANSI 60 5,6 86,1 33,3 23,8 31,8 GC 57,2 5,08 ø 11,91 19,05 19,05 12,6 K 20,6 Travel 1843 G Sideflexing: Thermoplastic Top Plates, 12.7 mm 1 /2” Pitch Rexnord Chain No. LF1843-K150GD* LF1843-K150GJ* LF1843SS-K150GD* LF1843SS-K150GJ* Base Chain Steel Stainless Steel Material Top Plate LF ® (Brown) * = Available upon request and minimum order quantity. EPDM rubber gripper elements (black). 50 shore A hardness. White grippers available upon request. Standard length: 240 pitches 10 ft (3.048 m) Width K mm 38,1 Radius min. R mm 254 GC Straight Curve mm mm 21,4 22,2 38,1 254 21,4 22,2 Standard ANSI 40 Weight kg/m 1,2 1,2 31,8 22,2 11,1 13,9 19,8 GC 31,8 19,1 31,8 3,65 ø 7,85 R GD 12,7 12,7 Travel GJ 7,75 K www.bergab.ru Берг АБ bergab@ya.ru Тел. 37 (495)-228-06-21, факс (495) 223-3071