hbso · hbsc · hbsr level sensors for tough environments

The HBS Level Switch/Sensor
is designed for Long-Term function
and detect most types of Liquids.
Detect: Waste Water, Clean Water,
all types of Refrigerant and all types of Oil.
Designed for high and low pressure/
temperature aplication.
Split design for easy replacement of the
electronic part.
Process
Automation
Applications:
• Automatic Oil control
• Liquid level control
• Alarm low and
high Level
• Compressor Proction
• Water and brine
systems
Advantages:
• High Pressure
aplications
• Replace Sight Glass
• LED indication
• No moving parts
• Split type
• Easy replacing
It´s worth to use
HB Products A/S as
a partner when you
require individual
solutions.
HBSC
HBSO
HBSR
HBSX
CO2
OIL
Water, NH3, HFC
Custom type
Note: Each type of HBS sensors have a data sheet for
further details/informations.
Specifications:
Power Supply:
11 to 30V DC
Current consumption: Max 5mA
Output:
Output current:
Indicating:
Media temp.:
Ambiant temp.:
Material sensorpart:
ON/OFF, PNP or
NPN, NO/NC
Max 50mA
Green or Red-LED,
wet ON
-56...to +100deg.C
-25...to +60deg.C
Stainless Steel
AISI304/PTFE
Mechan. Connection: 1/2” - 3/4” NPT,
BSPT or BSPP
EMC test:
EN Industrial
Vibration: IEC 68-2-6,
4g 2 to 500Hz
Pressure:
Accessories:
Max. 170bar.
Ordering code:
HBS_ - ___/ ___/ ____/ __/ _/_
S = Spare electronic
LED:
R = RED
G = GREEN
Output function:
NO = Normal open
NC = Normal close
(Fail Safe = NC)
Thread type:
NPT, BSPT
BSPP
Thread size:
1/2" Only HBSO, Oil switch
3/4" All types
Output type:
PNP
NPN
Media (liquid):
C = CO2
O1 = Oil switch type 1
O2 = Oil switch type 2
R = Water, NH3, HFC, (Conductive liquids)
X = Custom type
• HBPA Power adaptor plug, for easy connection to high voltage (switching solinoid valves directly)
• ICE PROOF heater, recommended for low temperature operation (below -30° C)
Your Sensor Specialist
www.hbproducts.dk
HBP Level Switch 03 091009