DD35A Diesel Locomotive - Lionel
DD35A Diesel Locomotive - Lionel
DD35A Diesel Locomotive - Lionel
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
LEGACY RailSounds sound system operations<br />
LEGACY RailSounds Sequence Control<br />
Your LEGACY-equipped locomotive features Sequence Control. Based on the movement and speed of<br />
the locomotive, Sequence Control automatically plays the sound effects of an entire trip, from departure<br />
to destination, while you run your locomotive. Prototypical horn signals, bell, and radio chatter are<br />
added automatically as you spin your throttle—no need to memorize a sequence of button presses.<br />
To activate the Sequence Control feature, press and hold the AUX1 button for three seconds.<br />
You'll hear a unique bell/horn signal, indicating that Sequence Control is now enabled. Release<br />
the AUX1 key when you hear the sound.<br />
Now, radio chatter, air brake release, and warning signals will play automatically as you move<br />
out, reach cruising speed, and then decelerate for arrival, as illustrated in Figure 6. Plus, you can<br />
still activate CrewTalk communication and TowerCom announcements using your remote.<br />
To discontinue Sequence Control, you must tap AUX1, and then tap the 0 key or the RESET<br />
button. Cycling track power off and back on also turns off Sequence Control mode.<br />
Note!<br />
During sequence control mode operation, speed step 1 is used to trigger departure<br />
effects such are air brake release and departure horn. Therefore your engine will not<br />
begin moving until speed step 2 and the Roll Mode button will bring your engine to a<br />
stop while Sequence Control mode is enabled. For the most realistic operation, medium<br />
or high momentum is recommended when using Sequence Control.<br />
Automatic Sequence Control<br />
The actual dialog will vary.<br />
SEQUENCE CONTROL<br />
ENABLED (hold AUX1 for 3<br />
seconds) - Ding-ding-toot!<br />
AT A STOP, after a long<br />
pause - “Dispatcher, we<br />
have a clear signal.”/ ”Roger<br />
that.”<br />
THROTTLE UP TO STEP<br />
1 - Air brakes release,<br />
RPMs up, departure horn.<br />
TROTTLE UP TO STEP<br />
2 + - Bell on. "Train is<br />
moving."/"Copy.".<br />
1/8 THROTTLE -<br />
Bell off.<br />
1/3 THROTTLE<br />
- Horn signal (in<br />
transit.).<br />
STOP - Bell<br />
off. "We are in<br />
position."/<br />
"Copy.".<br />
SLOW BELOW<br />
1/8 THROTTLE -<br />
Bell on.<br />
Figure 6. LEGACY RailSounds automatic Sequence Control<br />
SLOW BELOW 1/3 THROTTLE<br />
- Horn arrival signal. “We are<br />
arriving,”/ “Roger.”<br />
17<br />
3/4 THROTTLE - Crossing<br />
signal "We are at<br />
maximum authorized<br />
speed.".
Change language