SensorPulse - Rometec srl

Rometec srl - www.rometec.it - Rometec srl - www.rometec.it - Rometec srl - www.rometec.it
SensorPulse ®
Models SP-C468
SP-CL468
AC Current & Voltage
Transmitters/Isolators
Selectable Input/Output
22.5
(0.886)
75.0 (2.950)
DIN EN 50022-35
(not supplied)
35.5
(1.40)
ADAPTER BRACKET
FOR SURFACE
MOUNTING
(OPTIONAL)
KIT #: 35 DINADPTR
98.5 (3.880)
Dimensions in millimeters (inches)
Models SP-C468 and SP-CL468 AC Current and
Voltage Isolators/Transmitters allow for low cost
retransmission of any AC current (10 mA to 100 mA) or
voltage (100 mV to 200 V). Quickly set up, they can isolate
and retransmit to a wide variety of external devices
into standard process signals. The SP-C468 operates on
line power so no extra power supply is needed; the SP-
CL468 operates on low power for systems that work
exclusively at low voltages. Units mount easily on a
standard 35 mm DIN rail and is only 0.886 in (22.5 mm)
wide, allowing space for other equipment.
INPUT RANGES
Range
10 mV
20 mV
50 mV
100 mV
200 mV
Range
0 to 20 mV
0 to 500 mV
0 to 1 V
0 to 2 V
0 to 5 V
Range
0 to 10 V
0 to 20 V
0 to 50 V
0 to 100 V
0 to 200 V
OUTPUT RANGES
Range
(0-based)
0 to 1 V
0 to 5 V
0 to 10 V
0 to 1 mA
0 to 5 mA
0 to 20 mA
Range
(0+20%)
0.2 to 1
1 to 5
2 to 10
0.2 to 1
1 to 5
4 to 20
Range
(bi-polar)
-1 to 1
-5 to 5
-10 to 10
-1 to 1
-5 to 5
-20 to 20
Note: The spans can be adjusted within their minimum and maximum
values.
ACCESSORIES
SP-DIN1 . . . . . . . . DIN Rail, 1 meter length, 32 mm W x 15 mm H,
EN 50035 Compliant.
SP-DIN3 . . . . . . . . DIN Rail, 1 meter length, 35 mm W x 7.5 mm H,
EN 50022 Compliant.
SP-STOP1 . . . . . . . Gray End Stop for DIN 1 & 3, Screw Clamp.
SPECIFICATIONS
Power Supply:
SP-C468: 85 to 265 VDC/VAC 50 to 400 Hz.
SP-CL468: 12 to 28 VDC/VAC 50 to 400 Hz.
Power Consumption: 2 VA.
Isolation: 1800 VAC.
Ambient Temperature Range:
Operating: 32 to 131°F (0 to 55°C).
Storage: -40 to 176°F (-40 to 80°C).
Humidity Conditions (non-condensing): 0 to 90% up to
104°F (40°C) , 10 to 50% at 131°F (55°C).
Linearity: 0.1% of span.
Drift: ±0.02% per °C typical, ±0.05% maximum.
Response Time: 2 mS, 90% step change.
Input: AC sine wave.
Voltage Input:
Range: 100 mV to 200 VAC;
Input impedance: 100 Kilohm; Overvoltage: 300 VAC.
Current Input:
Range: 10 mA to 100 mA AC;
Input impedance: 10 ohms; Overcurrent: 120 mA AC.
Frequency Range: 40 to 400 Hz.
Zero Adjustment: -10% to +50% of scale.
Span Adjustment: -50% to +10% of scale.
Output Ranges: 0 to 1 V, 0.2 to 1 V, 0 to 5 V, 1 to 5 V, 0 to 10
V, 2 to 10 V, 0 to 1 mA, 0.2 to 1 mA, 0 to 5 mA, 1 to 5 mA, 0 to
10 mA, 2 to 10 mA, 0 to 20 mA, 4 to 20 mA.
Current Output Compliance: 12 V.
Maximum Current Output Load: 600 ohms.
Maximum Voltage Output Current (Minimum Voltage
Output Load): 20 mA (500 ohms).
Weight: 4.5 oz (128 g).
18
SensorPulse ® Corp./3999 Hupp Rd. Bldg. R-6-4/Kingsbury, IN 46345 • Phone: 219 393-7218/800 447-5900 • Fax: 219 393-7318 • email: info@sensorpulse.com
Rometec srl - www.rometec.it - Rometec srl - www.rometec.it - Rometec srl - www.rometec.it