Pioneer Pipe - Russel Metals, Inc.

standard pipe and line pipe data
NPS
Size
OD
Inches
Nom.
Wall
Thickness,
Inches
Weight
Lb/Ft
Plain End
Class
Sched.
No.
Grade
A
Grade
B
Mill Hydrostatic Test Pressure* — psi
0.250 47.44 10 500 580 990 1100 1230 1340 1420 1540 1660
0.281 53.23 560 660 1120 1230 1390 1500 1600 1730 1870
0.312 58.99 20 620 730 1240 1370 1540 1670 1770 1920 2070
0.344 64.93 690 800 1370 1510 1700 1840 1960 2120 2280
Grade
X-42
Grade
X-46
Grade
X-52
Grade
X-56
Grade
X-60
Grade
X-65
Grade
X-70
0.375 70.65 STD 750 880 1490 1640 1850 2000 2130 2310 2490
0.406 76.36 810 950 1610 1780 2000 2170 2310 2500 2700
0.438 82.23 30 880 1020 1740 1920 2160 2340 2490 2700 2910
18 18.000 0.469 87.89 940 1090 1860 2060 2310 2510 2670 2890 3000
(Seamless
and
Electric
Resistance
Weld)
0.500 93.54 XS 1000 1170 1990 2190 2470 2670 2840 3000 3000
0.562 104.76 40 1120 1310 2230 2460 2770 3000 3000 3000 3000
0.625 116.09 1250 1460 2490 2740 3000 3000 3000 3000 3000
0.688 127.32 1380 1610 2740 3000 3000 3000 3000 3000 3000
0.750 138.30 60 1500 1750 2980 3000 3000 3000 3000 3000 3000
0.812 149.20 1620 1890 3000 3000 3000 3000 3000 3000 3000
0.875 160.18 1750 2040 3000 3000 3000 3000 3000 3000 3000
0.938 171.08 80 1880 2190 3000 3000 3000 3000 3000 3000 3000
1.000 181.73 2000 2330 3000 3000 3000 3000 3000 3000 3000
1.125 202.94 2250 2630 3000 3000 3000 3000 3000 3000 3000
1.156 208.15 100 2800 2800 3000 3000 3000 3000 3000 3000 3000
1.188 213.51 2380 2770 3000 3000 3000 3000 3000 3000 3000
1.250 223.82 2500 2800 3000 3000 3000 3000 3000 3000 3000
1.375 244.37 120 2800 2800 3000 3000 3000 3000 3000 3000 3000
1.562 274.48 140 2800 2800 3000 3000 3000 3000 3000 3000 3000
* The mill hydrostatic test pressures indicated were calculated on the basis of a fiber stress equal to a percentage of the specified minimum yield strength for the
various sizes and grades, as follows:
OD Sizes Grade Percent of Specified Minimum Yield
2 3 /8” to 3 1 /2” Incl. A-B 60% or 2500 psi – whichever is the lesser
4” to 5 9 /16” Incl. A-B 60% or 2800 psi – whichever is the lesser
6 5 /8” to 44” Incl. A-B 75% or 2800 psi – whichever is the lesser
2 3 /8” to 8 5 /8” Incl. **All X-Grades 75% or 3000 psi – whichever is the lesser
10 3 /4” to 18” Incl. All X-Grades 85% or 3000 psi – whichever is the lesser
20” to 48” Incl. All X-Grades 90% or 3000 psi – whichever is the lesser
* Pressure values at yield and ultimate are calculated on the basis of minimum yield strength, minimum ultimate strength and nominal dimensions specified by API.
**Due to columnar effects in lengths over 45 feet, it may become necessary in some cases to use standard test pressures.
30
Legal Notice: This brochure is intended for general information only. Pioneer makes no warranty or representation, expressed or implied, of any kind with respect to the information
contained herein and shall in no event assume liability or responsibility for any loss, damage or injury whatsoever resulting from the use of this information. In all cases, the customer is
therefore requested to use this information at its own risk and responsibility.