Pioneer Pipe - Russel Metals, Inc.

More documents

Recommendations

Info

grooving Grooving (cont.) Cut Grooved Pipe Cut grooving standard steel pipe removes less metal, to less depth, than threading, maintaining the designed integrity of the pipe. Pipe Outside Diameter O.D. Standard Cut Groove Specifications For Steel Pipe Gasket Seat A ±0.03 Groove Diameter C Nomimal Pipe Size Inches Basic Tolerance ±0.03 Basic Tolerance 2 2.375 +0.024 -0.024 0.625 0.313 2.250 -0.015 0.063 0.154 2 1 /2 2.875 +0.029 -0.029 0.625 0.313 2.720 -0.018 0.078 0.188 3 3.500 +0.035 -0.031 0.625 0.313 3.344 -0.018 0.078 0.188 3 1 /2 4.000 +0.040 -0.031 0.625 0.313 3.834 -0.020 0.083 0.188 4 4.500 +0.045 -0.031 0.625 0.375 4.334 -0.020 0.083 0.203 5 5.563 +0.056 -0.031 0.625 0.375 5.395 -0.022 0.084 0.203 6 6.625 +0.063 -0.031 0.625 0.375 6.455 -0.022 0.085 0.219 8 8.625 +0.063 -0.031 0.750 0.438 8.441 -0.025 0.092 0.238 10 10.750 +0.063 -0.031 0.750 0.500 10.562 -0.027 0.094 0.250 12 12.750 +0.063 -0.031 0.750 0.500 12.531 -0.030 0.109 0.279 14 O.D. 14.000 +0.063 -0.031 0.938 0.500 13.781 -0.030 0.109 0.281 16 O.D. 16.000 +0.063 -0.031 0.938 0.500 15.781 -0.030 0.109 0.312 18 O.D. 18.000 +0.063 -0.031 1.000 0.500 17.781 -0.030 0.109 0.312 20 O.D. 20.000 +0.063 -0.031 1.000 0.500 19.781 -0.030 0.109 0.312 24 O.D. 24.000 +0.063 -0.031 1.000 0.563 23.656 -0.030 0.172 0.375 Groove Width B Groove Depth D (ref.) Min. Allow. Wall Thick. T 54 Legal Notice: This brochure is intended for general information only. Pioneer makes no warranty or representation, expressed or implied, of any kind with respect to the information contained herein and shall in no event assume liability or responsibility for any loss, damage or injury whatsoever resulting from the use of this information. In all cases, the customer is therefore requested to use this information at its own risk and responsibility.
threading Threading Threads: Pipe threads for general purpose applications are covered by an American National Standard Pipe Threads, General Purpose (INCH) ANSI/ASME B1.20.0. Threads for Line Pipe are covered by an American Petroleum Institute Standard API Specification 5B. The thread form, number of threads per inch and other thread dimension details are shown in the drawings and tables which follow. Dimensions for grooving pipe ends to be used with Victaulic Couplings are also included. Couplings Pipe Couplings for general purpose applications are covered by ASTM Standard A865-86 Threaded Couplings, Steel, Black or Zinc Coated (Galvanized), Welded or Seamless, for use in Steel Pipe Joints. The normal practice is to utilize non-recessed straight tapped (NPSC threads) couplings with standard weight pipe for trade sizes 1 /8" through 2" and taper tapped (NPT Thread) Non-Recessed Couplings with standard weight pipe for trade sizes 2 1 /2" through 6". The specifications for the coupling threads are covered in the American National Standard Pipe Threads General Purpose (INCH) ANSI/ASME B1.20.1. Taper Tapped Couplings (non-recessed) may be specified for pipe trade sizes 2" and under. It is normal practice to utilize Taper Tapped (NPT threads) Recessed Couplings for Extra-Strong and Double-Extra- Strong pipe in all trade sizes, and for standard pipe in trade sizes 8" and larger. The Taper Tapped (NPT) Recessed Couplings are the same as those for Line Pipe and are covered by the American Petroleum Institute Standard API Specifications 5L. Line Pipe Couplings are approximately 30 percent longer than merchant couplings and with the exception of the 1 /4", 2", 2 1 /2" and 4" trade sizes, have the same outside diameters. Line Pipe Couplings are recessed for two purposes. The recess helps to center the pipe in the coupling and guides it into the threads. The recess also covers the incomplete threads on the pipe created by the taper of the threads and thereby minimizes corrosion at that point. The specifications for Line Pipe Couplings are covered in the American Petroleum Institute specification API Specification 5L. Table 2 Coupling Thread Dimension—Straight-Tapped (NPSC) for Standard Weight Pipe NPS Threads/in. Outside diameter, in. W Coupling min length, in. Pitch diameter, in. NL min max 1 /8 27 0.563 3 /4 0.370 0.377 1 /4 18 0.719 1 1 /8 0.486 0.497 3 /8 18 0.875 1 1 /8 0.622 0.632 1 /2 14 1.063 1 1 /2 0.772 0.785 3 /4 14 1.313 1 9 /16 0.982 0.996 1 11 1 /2 1.576 1 5 /16 1.231 1.247 1 1 /4 11 1 /2 1.900 2 1.575 1.592 1 1 /2 11 1 /2 2.200 2 1.814 1.831 2 11 1 /2 2.750 2 1 /16 2.288 2.304 Outside diameter tolerances: For sizes 1 1 /2 and under +0.015 -0.031 in. 2 in. and over ±1% Legal Notice: This brochure is intended for general information only. Pioneer makes no warranty or representation, expressed or implied, of any kind with respect to the information contained herein and shall in no event assume liability or responsibility for any loss, damage or injury whatsoever resulting from the use of this information. In all cases, the customer is therefore requested to use this information at its own risk and responsibility. 55
Page 1 and 2:
1.800.525.1266 5th Edition 11
Page 3 and 4:
Table of Contents Standards & Speci
Page 5 and 6: SUBMITTAL DATA ASTM A53 Type F Grad
Page 7 and 8: SUBMITTAL DATA API 5L API 5L Specif
Page 9 and 10: SUBMITTAL DATA Chemical Composition
Page 11 and 12: SUBMITTAL DATA Requirements for the
Page 13 and 14: SUBMITTAL DATA CVN absorbed energy
Page 15 and 16: SUBMITTAL DATA Tolerances for Wall
Page 17 and 18: SUBMITTAL DATA Inspection Frequency
Page 19 and 20: SUBMITTAL DATA Inspection Frequency
Page 21 and 22: SUBMITTAL DATA ASTM A-500 Scope Thi
Page 23 and 24: SUBMITTAL DATA Reject, Structural G
Page 25 and 26: standard pipe and line pipe data NP
Page 43 and 44: charts, FORMULAS, CALCULATIONS & co
Page 51 and 52: COATING Types of Coating Extruded P
Page 53 and 54: COATING Weights & Conversions Squar
Page 55: galvanizing, grooving Galvanizing H
Page 59 and 60: threading Threading (cont.) NPS Tab
Page 61 and 62: glossary Glossary of Terms ALLOY ST
Page 63 and 64: glossary Glossary of Terms (cont.)
show all

Pioneer Pipe - Russel Metals, Inc.

Create successful ePaper yourself

Delete template?

Save as template?