Butcher and Nickel 1.0 Overhaul Instructions - Santa Cruz Bikes
Butcher and Nickel 1.0 Overhaul Instructions - Santa Cruz Bikes
Butcher and Nickel 1.0 Overhaul Instructions - Santa Cruz Bikes
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>Butcher</strong> <strong>and</strong> <strong>Nickel</strong> <strong>1.0</strong> <strong>Overhaul</strong> <strong>Instructions</strong><br />
http://www.santacruzbikes.com/tech/butcher_nickel_tech.php<br />
9. i) Press the first bearing in, with the nut sitting directly on the bearing.<br />
10.<br />
j) Once the first bearing is seated- remove the press adaptor from the opposite side, <strong>and</strong> press the<br />
second bearing in as you did the first.<br />
Step 7: Install new Main Pivot Bearings<br />
1.<br />
a) Repeat Steps 6b through 6e to press in new main pivot bearings<br />
10 of 16 28/01/2013 11:04
Change language