AC SERVO SYSTEMS FOR 400V - Sanyo Denki America, Inc.
AC SERVO SYSTEMS FOR 400V - Sanyo Denki America, Inc.
AC SERVO SYSTEMS FOR 400V - Sanyo Denki America, Inc.
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
FUNC<br />
CHARGE<br />
May cause electric shock.<br />
Hazard of personal injury or<br />
electric shock.<br />
Do not touch drive unit or<br />
terminal cover during power on<br />
or within 10MIN after power off.<br />
before power on.<br />
SET<br />
Miss wiring will be cause of<br />
breakdown. Be sure about wiring<br />
Connect earth terminal against<br />
electric shock.<br />
Reduced time and expence in designing your system.<br />
<br />
Easy setting<br />
<br />
Real-time auto-tuning function Machine<br />
characteristics is automatically measured to set<br />
necessary servo gain. Optimum setting can be<br />
obtained in a short time.<br />
<br />
<br />
<br />
Built-in operator with five-digit indication LED<br />
5LED<br />
Setting and monitoring in workplace are easy.<br />
Parameters can be set by using the built-in<br />
operator.<br />
<br />
<br />
Speed command value<br />
<br />
Detected speed value <br />
Tuning started<br />
<br />
All-in-one control<br />
<br />
Torque, position, and speed control can be<br />
selectively used by switching user parameters.<br />
<br />
<br />
Test operation (JOG function)<br />
<br />
JOG function is installed to check the<br />
connection between motor and amplifier<br />
allowing easy test operation without inputting<br />
position and speed commands.<br />
JOG<br />
<br />
<br />
Position<br />
<br />
or<br />
speed<br />
<br />
Torque<br />
control<br />
<br />
GOAL<br />
r<br />
t<br />
DL1<br />
DL2/RB1<br />
RB4<br />
RB2<br />
QS1C10A<br />
P<br />
C<br />
C<br />
N<br />
1<br />
N C 2<br />
JOG operation enabled without<br />
connection to upper levels.<br />
<br />
JOG<br />
START<br />
Flat road<br />
<br />
Upslope<br />
<br />
R<br />
S<br />
T<br />
U<br />
V<br />
W<br />
WARNING<br />
Operation check enabled with<br />
motor and amplifier only.<br />
<br />
<br />
3