Owners Manual - InPOWER LLC

VCMS-SP09 System Input/Output Diagram
Switch Module
Switch Legend
SW1: _____________________________________
Switch Function
2-Position Latching (Off_On1)
SW1
SW3
SW5
SW2: _____________________________________
2-Position Latching (Off_On1)
SW3: _____________________________________
2-Position Latching (Off_On1)
SW2
SW4
SW6
SW4: _____________________________________
Momentary
SW5: _____________________________________
2-Position Latching (Off_On1)
SW6: _____________________________________
Momentary
Logic Cable (15 ft.)
VCMS-PM1 Power Module (MOD1)
System Outputs
System Inputs
O-1 ____________________________ ( _____ Amps)
Ignition On (+12 V)
I-1
BAT
O-2 ____________________________ ( _____ Amps)
Unused
I-2
O-3 ____________________________ ( _____ Amps)
Unused
Unused
I-3
I-4
GND
BAT
O-4 ____________________________ ( _____ Amps)
O-5 _____________________________ ( _____ Amps)
BAT
O-6 _____________________________ ( _____ Amps)
Ground
20
20
20
+12 Volt Battery
Fuses not supplied with system.
Power Module Input Assignments
Input Function
I-1 Ignition On (+12 Volt True)
I-2 Unused
I-3 Unused
I-4 Unused
Power Module Output Assignments
Output Activated By
O-1 SW1 + I-1
O-2 SW2 + I-1
O-3 SW5 + I-1
O-4 SW4 + I-1
O-5 SW5 + I-1
O-6 SW6 + I-1
Customer Project:________________________________ Date__________
Figure 11
© Copyright 2009 InPower LLC
InPower LLC
3555 Africa Road
Galena, Ohio 43021 USA
740-548-0965
www.InPowerDirect.com
Page
6 of 6
VCMS Owners Manual
Document: OM-136 Version Code: A
Date: Oct. 27, 2010 Date: Oct. 27, 2010