Data Sheet - Seiko Instruments GmbH

CUTTERS, INTERFACE BOARD & CPU
ACU5000 SERIES AUTOCUTTER
The ACU5000 Series autocutter is a guillotine type cutter
developed for the LTP5000 Series thermal line printer mechanism.
Full or partial paper cutting options are selectable by
the operator. This autocutter can be easily mounted on the
LTP5000 Series mechanisms using a specified board, allowing
for easy maintenance.
• Full or partial paper cut is available
by command input
• Easily mounts on mechanism
• After having been mounted, the
cutter can be easily opened,
allowing for easy maintenance
• A wide variety of models are
available, in response to each
mechanism in the LTP5000 Series
IF5003-02B INTERFACE BOARD
FOR LTP5000 SERIES
The IF5003-02B interface board is used specifically
for the LTP5000 Series printer
mechanism and supports parallel and serial
data input.
A wide variety of characters and commands
are available to respond to diverse needs. The
IF5003-02B is equipped with a drive terminal
for the ACU5000 Series auto cutter, allowing
for easy attachment.
IF5003-02B
ACU5224
ACU5424
Model
Applicable mechanism
CPU
Input control method
Character type
PT502P02 CPU FOR LTP5000 SERIES
When used together with a gate array as a pair, the CPU
for the LTP5000 Series can easily create a drive board with
the same variety of functions as the interface board.
• Prints with less current using division control in accordance
with the number of dots to be activated
• Dual-power drive system minimizes fluctuation in voltage
to the stepping motor
ACU5324
• Supports both parallel and serial data
input
• Ensures high-quality print by measuring
the temperature and voltage and
adjusting the print density
• Provides a wide variety of character functions including
double-width/double-height, inverse print, underlining
and character spacing control
• Provides a ruler line function, allowing ruler lines and
characters to be easily superimposed
IF5003-02B
All LTP5000 series
PT502P02/PT500GA1
8-bit parallel (modified Centronics)
Serial (TTL level)
IBM compatible character set
Japanese Kana character set
Dimensions (WxDxH) mm 100 x 130 x 22
Weight (g) 90
Operating voltage (Vp) 5VDC ± 0.25
Current consumption (lcc)
Max. 100 mA @ 5VDC (standby)
Max. 240 mA @ 5VDC (printing)
Operating temperature (°C) 0 to 50
Storage environment (°C) -20 to 60
Model
PT502P02
Applicable mechanism
All LTP5000 series
Package form
80-pin flat package
Dimensions (WxDxH) mm 25.2 x 19.2 x 2.15
Configuration
C-MOS LSI
Input method
8-bit parallel (Centronics), Asynchronous serial
Operating voltage (Vcc) 5VDC ± 0.25
Operating frequency (MHz) 16.0 ± 0.5%
Remark
Use this CPU and a gate array (PT500GA1) as a pair
Series ACU5200 ACU5300 ACU5400
Model ACU5224 ACU5212 ACU5324 ACU5424 ACU5412
Cut method
Guillotine type
Cut width (mm) 63 97 122
Cut condition
Full or partial cut (leaving one-point, 2 mm wide)
Drive voltage Motor 24 ± 2.4 12 ± 1.2 24 ± 2.4 12 ± 1.2
(VDC) Detector 5 ± 0.25
Starting current (A) 1.2 max. 4.5 max. 1.0 max. 2.4 max.
Operating time (ms/cycle) 700 max. 850 max.
Cut frequency (cuts/minute)
10 max.
Life (cuts) 300,000
Dimensions (WxDxH) mm 70 x 58 x 21.5 105 x 58 x 21.5 130 x 58 x 21.5
Weight (g) 150 210 250
Operating temperature (°C) 0 to 50
Storage temperature (°C) -20 to 60
Paper thickness (µm) 65
Seiko Instruments GmbH
Siemensstraße 9
D-63263 Neu-Isenburg
Telephone: 49-6102-297-0
Facsimile: 49-6102-297222
Specifications subject to change without notice.
LTP5000 / 1.03