THE MANUAL: AURORA CDD - the Solar Panel Store
THE MANUAL: AURORA CDD - the Solar Panel Store
THE MANUAL: AURORA CDD - the Solar Panel Store
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Page 15 of 80 Instruction Manual for <strong>AURORA</strong> <strong>CDD</strong> BCG.00613_AA<br />
Part 2<br />
Unpack and Select Installation Location<br />
2.2 SELECT INSTALLATION LOCATION<br />
The device uses radio waves to transmit and receive data, it is <strong>the</strong>refore important to assess this<br />
factor in choosing <strong>the</strong> installation position. Walls in reinforced cement and surfaces covered in<br />
metal (doors, shutters, etc.) can markedly reduce <strong>the</strong> reach of <strong>the</strong> device as noted below.<br />
Table 2-2: Factors affecting wireless signal strength<br />
Material<br />
Relative signal range reductions<br />
Open Field<br />
Approximately 100 m<br />
Wood / Glass 0 – 10%<br />
Stone / Pressed cardboard 10 – 40%<br />
Reinforced concrete increases with amount of 10 – 90%<br />
reinforcement<br />
Metal Up to 100%<br />
It is advisable to undertake all <strong>the</strong> configuration operations, before installing <strong>the</strong> <strong>CDD</strong> permanently<br />
in <strong>the</strong> same location and position used during <strong>the</strong> configuration.<br />
2.2.1.1 Overall Dimensions<br />
The following figure shows <strong>the</strong> overall dimensions expressed in mm and in inches.<br />
Figure 2-1: Overall Dimensions