Description Polymerized butylenes that are viscous, non-drying liquid polymers with great product versatility. Advantages Non-toxic, non-drying, lubricity, imparts tackiness or adhesion, corrosion protection, burns without residue, good thermal stability, and superior dielectric properties. End Uses Raw material for ashless dispersants, fuel and gasoline additives, lubricants, caulks, sealants, adhesives, blown stretch film, dielectric fluids, cosmetics and personal care. Polybutenes Grades: PB 6, 8, 10, 12, 16, 18, 20, 24, 32, 122, 124, 128 SPECIFICATION PROPERTIES ASTM PB 6 PB 8 PB 10 PB 12 PB 16 PB 18 PB 20 PB 24 PB 32 PB 122 PB 124 PB 128 Appearance D-4176 Viscosity , cSt D-445 Bright & Clear Bright & Clear Bright & Clear Bright & Clear Bright & Clear Bright & Clear Bright & Clear Bright & Clear Bright & Clear Bright & Clear Bright & Clear Bright & Clear Min 21 94 210 23 41 70 110 190 595 2200 2950 4000 Max 45 130 230 37 59 95 125 250 685 2950 3600 4900 Temp (°C) 40 40 40 100 100 100 100 100 100 100 100 100 Water , ppm Max Color, Pt-Co Scale Max D-6304 70 70 70 70 70 70 70 70 70 70 70 70 D-5386 (D-1206) 100 100 100 100 100 100 100 100 100 100 100 100 Flash Point (COC), °C Min D-92 110 120 120 120 120 120 120 180 200 200 200 200 TYPICAL PROPERTIES Average Molecular Weight, GPC 350 460 510 540 670 700 856 950 1300 2225 2400 2600 Specific Gravity 15.6°/15.6°C D-1298 0.84 0.86 0.865 0.87 0.87 0.88 0.88 0.885 0.896 0.91 0.91 0.91 Density, lb/gal D-1298 6.97 7.16 7.21 7.25 7.29 7.33 7.33 7.41 7.48 7.55 7.56 7.57 Acid Number, mg KOH/g Max Pour Point ( °C ) Min D-974 0.02 0.02 0.02 0.02 0.02 0.02 0.02 0.02 0.02 0.02 0.02 0.02 D-97 -40 -35 -30 -30 -20 -15 -10 -5 5 10 10 15 POLYBUTENES
Description Chemical compounds derived by reacting an oxoacid with a hydroxyl compound such as an alcohol or phenol. Advantages Ester basestock advantages include: biodegradability, thermal and oxidative stability, low temperature fluidity, metal wetting, additive synergy, sludge control, anti-wear, seal swell, detergency and friction modification. Esters come in a variety of grades, allowing for high formulation flexibility. End Uses Esters are used in gear, hydraulic, transformer, gas turbine, crankcase, bearing and transmission fluids, greases, compressor oils, PAO enhancement, biodegradable and general lubricants. They are also used in the caulks, sealants, adhesives, cosmetics and personal care. Ester Grades: Ester A 55, D75, D77, D84, D 124, P 43, P 48, P 87, P 122, T 94, T 163 NAME DESCRIPTION Vis@100 C (cSt) Vis@ 4 0°C (cSt) Ester A 55 Pure adipate diester 5.5 28 135 Ester D 75 Dodecanedioic acid and tridecyl alcohol 7.5 40 155 Ester D 77 Synthetic diester 7.7 62 84 Ester D 84 Synthetic diester 8.4 85 51 Ester D 124 Dimerate diester 12.4 83 145 Ester P 43 Ester P 48 Ester P 87 Ester P 122 Ester T 94 Polyol ester based on trimethylolpropane Polyol ester of neopentyl glycol and mixed fatty acids Polyol ester based on pentaerythritol Polyol ester based on pentaerythritol Triester based on branched chain alcohols 4.35 83 140 4.8 22 145 8.7 64 120 12.2 81 150 9.4 87 82 Ester T 163 High viscosity triester 16.3 213 76 VI BENEFITS APPLICATIONS High Temperature stability, low Gear and Transmission Fluids, Greases, Temperature fluidity, high VI, Compressor Oils, Automotive Engine Oils, biodegradability, volatility, lubricity PAO Enhancement, Biodegradable Biodegradability, high flash and fire points, light color Automotive Engine Oils and General Purpose Oxidative stability, anti-wear, high Circulating and Screw Compressor Oils, Gear flash and fire points, low pour point, and Bearing Oils, Hydraulic Fluids and Chain volatility, demulsibility, NSF approved Lubricants. Low evaporation rate, light color, high Compressor and General Lubricants flash and fire points High VI, excellent lubricity and good low temperature fluidity High temperature stability, low temperature fluidity, biodegradability, low volatility, lubricity and VI Biodegradability, high temperature stability and excellent lubricity Automotive and Industrial Gear and Transmission Oils,2-Stroke Engine Oils, Grease Automotive and Gas Turbine Engine Oils, Gear and Transmission Fluids, Greases, Air Compressor Lubricants, Biodegradable General Purpose Automotive and Industrial lubricants High temperature stability, Conveyor Oven Chain, Gas Turbine, 2-Stroke, cleanliness low volatility, low Diesel Engine Oils, High Temperature temperature fluidity, lubricity and VI Greases, Refrigeration Compressor Lubricants High temperature stability, lubricity, 2 & 4 Stroke Engine Oils, High Temperature volatility, pour point, VI Greases, Gear and Transmission Fluids, biodegradable Compressor Oils, Biodegradable Lubricants High temperature stability, low temperature fluidity, volatility, viscosity, lubricity High temperature stability, low volatility, high viscosity and good lubricity Gear, Compressor and Automotive Oils, Grease Gear, Conveyor Oven Chain and Automotive Engine Oils, High Temperature Greases (A – Adipate, D – diester, P – Polyol and T – Triester, Number = typical viscosity at 100C/100) ESTERS