Product Lubrication Markets - Soltex
Product Lubrication Markets - Soltex
Product Lubrication Markets - Soltex
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Synthetic Basestocks<br />
•Alkylates<br />
•Polyalphaolefins<br />
•Polybutenes<br />
•Esters<br />
Performance Additives<br />
•Fuel Additives Packages<br />
•Lubricant Additives Packages<br />
•Anti-wear/Extreme Pressure<br />
Additives<br />
•Detergents<br />
•Dispersants<br />
•Emulsifiers/Intermediates<br />
•Tackifiers<br />
•Viscosity Modifiers<br />
•Grease Additives
Description<br />
Branched and linear alkylbenzenes. Branched alkylbenzene (BAB) is produced by<br />
reacting benzene with various propylene oligomers to produce different molecular<br />
weights. Linear alkylbenzene (LAB) is produced by reacting benzene with linear alpha<br />
olefins producing a range of different molecular weight products.<br />
Advantages<br />
Superior low temperature properties, excellent oxidative and thermal stability, compatible<br />
with elastomers, seal swell and improved solubility.<br />
End Uses<br />
Raw materials for surfactants and synthetic sulfonates and base oil for specialty lubricants<br />
and functional fluids. Used in agriculture and electronic components and equipment.<br />
Alkylate Fluids Grades: ISO 32, ISO 46, ISO 68, ISO 100<br />
TYPICAL PROPERTIES ASTM ALKYLATE 6 ALKYLATE 14 IS0 32 ISO 46 ISO 68 ISO 100<br />
Color,<br />
Max<br />
Pour Point , °C<br />
Max<br />
Kinematic Viscosity (cSt) ,<br />
40 °C<br />
Flash Point (COC), °C<br />
Min<br />
Floc Point , °C<br />
Max<br />
Specific Gravity<br />
Min<br />
Acid Number, mg KOH/g<br />
Max<br />
Water, ppm<br />
Max<br />
D-1500 1 1 1.5 1.5 1.5 1.5<br />
D-97 - 40 - 40 - 40 - 35 - 30 - 30<br />
D-445 5 - 7 13 - 24 29 - 35 42 - 50 50 - 70 85 - 105<br />
D-92 127 206 175 185 185 170<br />
ASH - 86 - 65 - 65 - 65 - 60 - 55 - 55<br />
D-1298 0.87 0.87 0.86 0.86 0.86 0.86<br />
D-974 0.02 0.02 0.02 0.02 0.02 0.02<br />
D-1533 100 100 30 30 30 30<br />
Average Molecular Weight D-3593 246 355 - 365<br />
Water, ppm<br />
Max<br />
D-1533 100 100 30 30 30 30<br />
Boiling Point Range, °C 315 - 390<br />
Bromine Number<br />
Max<br />
D-2710 0.03<br />
ALKYLATES
Description<br />
Polyaphaolefins (PAO’s) are hydrogenated olefin oligomers manufactured by the catalytic<br />
polymerization of linear alpha olefins. PAO products are colorless liquids with welldefined,<br />
wax-free isoparaffinic structures.<br />
Advantages<br />
High viscosity index, food-grade approval, superior oxidative and thermal stability, good<br />
low temperature properties and non-toxic.<br />
End Uses<br />
Food-grade greases, telecom cables, automotive, industrial and aerospace lubricants.<br />
Polyalphaolefins Grades: PAO 2, 4, 5, 6, 7, 8, 9, 10, 40, 100<br />
TYPICAL PROPERTIES ASTM PAO 2 PAO 4 PAO 5 PAO 6 PAO 7 PAO 8 PAO 9 PAO 10 PAO 40 PAO 100<br />
Kinematic Viscosity (cSt)<br />
100 o C<br />
D-445 1.7<br />
3.9<br />
5.1<br />
5.9<br />
7.0<br />
7.9<br />
9.0<br />
10<br />
41<br />
103<br />
40 o C<br />
5.1<br />
17<br />
24<br />
31<br />
37<br />
46<br />
56<br />
68<br />
411<br />
1,350<br />
-40 o C<br />
285<br />
2,420<br />
4,400<br />
7,500<br />
11,500<br />
18,000<br />
-<br />
38,000<br />
-<br />
-<br />
Viscosity Index D-2270 124 145 135 145 135 143 136 152 168<br />
Pour Point, °C D-97 -73 -50 -61 -43 -57 -35 -54 -39 -23<br />
Flash Point (COC), °C D-92 165 219 246 238 260 257 258 266 288 288<br />
Fire Point (COC), °C D-92 249 278 271 290 290 304 304 n/a n/a<br />
Specific Gravity<br />
15.6°/15.6°C D-1298 0.800 0.820 0.824 0.828 0.832 0.833 0.835 0.835 0.850 0.855<br />
Density, lb/gal 6.67 6.82 6.86 6.90 6.92 6.95 6.96 6.97 7.09 7.13<br />
Acid Number, mg KOH/g<br />
Max<br />
D-974 0.03 0.03 0.03 0.03 0.03 0.03 0.03 0.03 0.03<br />
Appearance D-4176 Clear Clear Clear Clear Clear Clear Clear Clear Clear Clear<br />
Color, Pt/Co<br />
Max<br />
D-5386 50 50 50 50 50 50 50 50 50 50<br />
Noack Volatility, wt-% DIN51581 5.5 2.3 1.5<br />
Evaporation Loss, wt-%<br />
6.5 h @ 204.4°C (400°F)<br />
D-972 1.3<br />
POLYALPHAOLEFINS
Description<br />
Polymerized butylenes that are viscous, non-drying liquid polymers with great product<br />
versatility.<br />
Advantages<br />
Non-toxic, non-drying, lubricity, imparts tackiness or adhesion, corrosion protection,<br />
burns without residue, good thermal stability, and superior dielectric properties.<br />
End Uses<br />
Raw material for ashless dispersants, fuel and gasoline additives, lubricants,<br />
caulks, sealants, adhesives, blown stretch film, dielectric fluids, cosmetics and personal<br />
care.<br />
Polybutenes Grades: PB 6, 8, 10, 12, 16, 18, 20, 24, 32,<br />
122, 124, 128<br />
SPECIFICATION PROPERTIES ASTM PB 6 PB 8 PB 10 PB 12 PB 16 PB 18 PB 20 PB 24 PB 32 PB 122 PB 124 PB 128<br />
Appearance D-4176<br />
Viscosity , cSt D-445<br />
Bright<br />
& Clear<br />
Bright<br />
& Clear<br />
Bright<br />
& Clear<br />
Bright<br />
& Clear<br />
Bright<br />
& Clear<br />
Bright<br />
& Clear<br />
Bright<br />
& Clear<br />
Bright<br />
& Clear<br />
Bright<br />
& Clear<br />
Bright<br />
& Clear<br />
Bright<br />
& Clear<br />
Bright<br />
& Clear<br />
Min<br />
21 94 210 23 41 70 110 190 595 2200 2950 4000<br />
Max 45 130 230 37 59 95 125 250 685 2950 3600 4900<br />
Temp (°C) 40 40 40 100 100 100 100 100 100 100 100 100<br />
Water , ppm<br />
Max<br />
Color, Pt-Co Scale<br />
Max<br />
D-6304 70 70 70 70 70 70 70 70 70 70 70 70<br />
D-5386<br />
(D-1206)<br />
100 100 100 100 100 100 100 100 100 100 100 100<br />
Flash Point (COC), °C Min D-92 110 120 120 120 120 120 120 180 200 200 200 200<br />
TYPICAL PROPERTIES<br />
Average Molecular Weight,<br />
GPC<br />
350 460 510 540 670 700 856 950 1300 2225 2400 2600<br />
Specific Gravity 15.6°/15.6°C D-1298 0.84 0.86 0.865 0.87 0.87 0.88 0.88 0.885 0.896 0.91 0.91 0.91<br />
Density, lb/gal D-1298 6.97 7.16 7.21 7.25 7.29 7.33 7.33 7.41 7.48 7.55 7.56 7.57<br />
Acid Number, mg KOH/g<br />
Max<br />
Pour Point ( °C )<br />
Min<br />
D-974 0.02 0.02 0.02 0.02 0.02 0.02 0.02 0.02 0.02 0.02 0.02 0.02<br />
D-97 -40 -35 -30 -30 -20 -15 -10 -5 5 10 10 15<br />
POLYBUTENES
Description<br />
Chemical compounds derived by reacting an oxoacid with a hydroxyl compound such<br />
as an alcohol or phenol.<br />
Advantages<br />
Ester basestock advantages include: biodegradability, thermal and oxidative stability,<br />
low temperature fluidity, metal wetting, additive synergy, sludge control, anti-wear, seal<br />
swell, detergency and friction modification. Esters come in a variety of grades, allowing<br />
for high formulation flexibility.<br />
End Uses<br />
Esters are used in gear, hydraulic, transformer, gas turbine, crankcase, bearing and<br />
transmission fluids, greases, compressor oils, PAO enhancement, biodegradable and<br />
general lubricants. They are also used in the caulks, sealants, adhesives, cosmetics<br />
and personal care.<br />
Ester Grades: Ester A 55, D75, D77, D84, D 124, P 43,<br />
P 48, P 87, P 122, T 94, T 163<br />
NAME DESCRIPTION<br />
Vis@100<br />
C (cSt)<br />
Vis@ 4<br />
0°C (cSt)<br />
Ester A 55 Pure adipate diester 5.5 28 135<br />
Ester D 75<br />
Dodecanedioic acid and<br />
tridecyl alcohol<br />
7.5 40 155<br />
Ester D 77 Synthetic diester 7.7 62 84<br />
Ester D 84 Synthetic diester 8.4 85 51<br />
Ester D 124 Dimerate diester 12.4 83 145<br />
Ester P 43<br />
Ester P 48<br />
Ester P 87<br />
Ester P 122<br />
Ester T 94<br />
Polyol ester based on<br />
trimethylolpropane<br />
Polyol ester of neopentyl<br />
glycol and mixed fatty<br />
acids<br />
Polyol ester based on<br />
pentaerythritol<br />
Polyol ester based on<br />
pentaerythritol<br />
Triester based on<br />
branched chain alcohols<br />
4.35 83 140<br />
4.8 22 145<br />
8.7 64 120<br />
12.2 81 150<br />
9.4 87 82<br />
Ester T 163 High viscosity triester 16.3 213 76<br />
VI BENEFITS APPLICATIONS<br />
High Temperature stability, low Gear and Transmission Fluids, Greases,<br />
Temperature fluidity, high VI, Compressor Oils, Automotive Engine Oils,<br />
biodegradability, volatility, lubricity PAO Enhancement, Biodegradable<br />
Biodegradability, high flash and fire<br />
points, light color<br />
Automotive Engine Oils and General Purpose<br />
Oxidative stability, anti-wear, high Circulating and Screw Compressor Oils, Gear<br />
flash and fire points, low pour point, and Bearing Oils, Hydraulic Fluids and Chain<br />
volatility, demulsibility, NSF approved Lubricants.<br />
Low evaporation rate, light color, high<br />
Compressor and General Lubricants<br />
flash and fire points<br />
High VI, excellent lubricity and good<br />
low temperature fluidity<br />
High temperature stability, low<br />
temperature fluidity, biodegradability,<br />
low volatility, lubricity and VI<br />
Biodegradability, high temperature<br />
stability and excellent lubricity<br />
Automotive and Industrial Gear and<br />
Transmission Oils,2-Stroke Engine Oils,<br />
Grease<br />
Automotive and Gas Turbine Engine Oils,<br />
Gear and Transmission Fluids, Greases, Air<br />
Compressor Lubricants, Biodegradable<br />
General Purpose Automotive and Industrial<br />
lubricants<br />
High temperature stability, Conveyor Oven Chain, Gas Turbine, 2-Stroke,<br />
cleanliness low volatility, low Diesel Engine Oils, High Temperature<br />
temperature fluidity, lubricity and VI Greases, Refrigeration Compressor Lubricants<br />
High temperature stability, lubricity, 2 & 4 Stroke Engine Oils, High Temperature<br />
volatility, pour point, VI Greases, Gear and Transmission Fluids,<br />
biodegradable<br />
Compressor Oils, Biodegradable Lubricants<br />
High temperature stability, low<br />
temperature fluidity, volatility,<br />
viscosity, lubricity<br />
High temperature stability, low<br />
volatility, high viscosity and good<br />
lubricity<br />
Gear, Compressor and Automotive Oils,<br />
Grease<br />
Gear, Conveyor Oven Chain and Automotive<br />
Engine Oils, High Temperature Greases<br />
(A – Adipate, D – diester, P – Polyol and T – Triester, Number = typical viscosity at 100C/100)<br />
ESTERS
Fuel Additives Packages:<br />
<strong>Soltex</strong> Fuel Additive Packages are fully formulated to provide excellent deposit control<br />
and clean up, corrosion protection, fluid stability with a patented combustion catalyst<br />
allowing the optimum extraction of power while reducing undesirable side products of<br />
combustion. They include EPA approved and off road versions.<br />
• Gasoline Fuel Additive PCA 1001<br />
• Diesel Fuel Additive PCA 1002<br />
• Off Road Diesel Fuel Additive PCA 1003<br />
Lubricant Additives Packages:<br />
<strong>Soltex</strong> Lubricant Additive Package contain a carefully balanced combination of components<br />
as required to meet the performance of each individual application.<br />
• Diesel Engine Oil Additive PCA 2861<br />
• Passenger Car Motor Oil Additive PCA 2877<br />
• Passenger Car Motor Oil Additive PCA 2886<br />
• Tractor Hydraulic Fluid Additive PCA 2715<br />
• Two Cycle Combustion Improver PCA 2075<br />
Anti-wear/Extreme Pressure Additives:<br />
<strong>Soltex</strong> Anti-wear / Extreme Pressure Additives includes a bismuth, non-toxic, biofriendly<br />
bismuth soap additive which works to reduce wear, increase load bearing performance<br />
and reduce the coefficient of friction. It supplies the anti-wear and extreme<br />
pressure performance without increase of zinc, phosphorous or chlorine.<br />
• Functional Bismuth Soap with active sulfur PCA 3003<br />
Detergents:<br />
<strong>Soltex</strong> Detergents provide extra base needed to react with any potential acidic by products<br />
produced by the environment, time or operating parameters. They come in nontoxic,<br />
biodegradable formulas along with a range of TBNs from 10 to 400 to work with<br />
your formulation requirements.<br />
• Non-toxic, Biodegradable Multifunctional Detergent PCA 4000<br />
• Overbased Magnesium Sulfonate PCA 4001<br />
• High Performance Neutral Calcium Sulfonate PCA 4020<br />
• Overbased Magnesium Salicylate Detergent PCA 4100<br />
• Overbased Calcium Sulfonate/Salicylate PCA 4220<br />
• Overbased Calcium Salicylate Detergent PCA 4270<br />
• Overbased Calcium Sulfonate 400 TBN for liquids PCA 4400<br />
performance
Grease Additives:<br />
<strong>Soltex</strong> offers a high performance Bio-Based, Food Grade Over Based Calcium Oleate<br />
Grease Base which produces greases with high dropping points, good wear, EP and<br />
excellent low temperature properties. <strong>Soltex</strong> also offers two readily gelling Over Based<br />
Calcium Sulfonate grease bases; one with food grade approval.<br />
• Over based Calcium Sulfonate Grease Base AmorCal 400M<br />
• Over based Calcium Sulfonate Food Grade AmorCal 400 FG<br />
• Over based Calcium Oleate Grease Base PCA 9000<br />
additives<br />
Dispersants:<br />
<strong>Soltex</strong> dispersants are oxidatively stable ashless succinimides with a variety of hydrocarbon<br />
tail chain lengths designed to keep equipment deposit free by holding these<br />
particles in solution and eliminate their deposition onto equipment surfaces.<br />
• 950 MW PIBSI PCA 5950 (PCA 9070)<br />
• 1300 MW PIBSI PCA 5130 (PCA 9080)<br />
• 1300 MW di-PIBSI PCA 5132 (PCA 9090)<br />
Emulsifiers/Intermediates:<br />
<strong>Soltex</strong> emulsifiers/intermediates are Polyisobutylene Succinic Anhydride with various<br />
polymeric raw material molecular weights. They are typically used as emulsifiers or in<br />
the manufacture of various dispersants.<br />
• 450 MW PIBSA PCA 6450 (PCA 9010)<br />
• 750 MW PIBSA PCA 6750 (PCA9030)<br />
• 950 MW PIBSA PCA 6950 (PCA 9050)<br />
• 1300 MW PIBSA PCA 6130 (PCA 9060)<br />
Tackifiers:<br />
<strong>Soltex</strong> tackifiers are high molecular weight polymers in an oil carrier that provides tack,<br />
adhesion, and non-drip characteristics to lubricant formulations. Typically used in bar<br />
and chain lubricants, greases, way lubricants, and rust or corrosion inhibitor packages.<br />
• PIB in oil with light color 2500 cSt @ 100 E 857<br />
• PIB in oil with 2500 cSt @ 100 E 858<br />
• PIB in food grade oil with 3000 cSt @ 100 TACKIFIER FG<br />
Viscosity Modifiers:<br />
Polymeric viscosity modifiers with various viscosities and VIs to accommodate customer’s<br />
individual handling and formulation needs. They provide effective thickening<br />
and an alternative to bright stock.<br />
• Polymeric viscosity modifier for base oil (9cSt at 100 C) BSR 9<br />
• Polymeric viscosity modifier for base oil (30cSt at 100 C) BSR 30<br />
• Polymeric viscosity modifier for base oil (900cSt at 100 C) BSR 900
The <strong>Soltex</strong> philosophy is to supply high quality products,<br />
exceptional customer support, and innovative problem solving.<br />
Our <strong>Soltex</strong> base components and chemical additives increase<br />
the value of the chemical products in numerous industrial and<br />
consumer applications. We strive to provide not only friendly<br />
customer service that focuses on timely responses, but also<br />
technical support for the chemical products. The <strong>Soltex</strong> staff is<br />
knowledgeable about the chemical supply and is eager to share<br />
that knowledge in helping customers with their chemical product and application<br />
needs. <strong>Soltex</strong> is constantly seeking innovative solutions expanding on chemical<br />
formulas and providing uniquely blended solutions for applications. Our philosophy<br />
and dedication has allowed <strong>Soltex</strong> to become a major supplier for the worldwide<br />
industrial chemical market.<br />
•Acetylene Black<br />
•Polybutenes<br />
•Specialty Polyisobutylene<br />
•Alkylates<br />
•Cable Flood<br />
•Performance Additives<br />
•Polyalphaolefins<br />
•Refrigeration Fluids<br />
•Sulfonates<br />
•Base Oils<br />
•Dielectric Fluids<br />
•Esters<br />
<strong>Soltex</strong> Contact Information:<br />
Susan Kovacs<br />
Gabrielle Massoud<br />
Vice President Sales<br />
Lubricant Business Manager<br />
skovacs@soltexinc.com<br />
gmassoud@soltexinc.com<br />
973.610.3346 281.382.3712<br />
Osvaldo Desvard<br />
Julie Moon<br />
International Sales Manager<br />
Sales Representative<br />
odesvard@soltexinc.com<br />
jmoon@soltexinc.com<br />
281.610.2155 (Mobile) 832.544.7847<br />
Joseph Massoud<br />
Peter Hayes<br />
Sales Representative<br />
Sales Representative<br />
jmassoud@soltexinc.com<br />
phayes@soltexinc.com<br />
281.587.0900 989.781.0642<br />
William J. Wahl<br />
Yajaira Medina-Marshall<br />
Sales Manager<br />
Latin America Sales Representative<br />
wwahl@soltexinc.com<br />
mmimports@aol.com<br />
281.587.0900 832.215.8550