Complex Equipment Supplier Guide - Spring

Complex Equipment 

Supplier Guide 

Singapore Economic Development Board 

250 North Bridge Road, #28-00 Raffles City Tower, Singapore 179101 

Tel: +65 6832 6832 • Fax: +65 6832 6565 

www.sedb.com 

SPRING Singapore 

2 Bukit Merah Central, Singapore 159835 

Tel: +65 6278 6666 • Fax: +65 6278 6667 

www.spring.gov.sg

All rights reserved. No part of this publication 

should be reproduced, stored in a retrieval 

system, or transmitted, in any form or by any 

means, electronic, mechanical, photocopying 

or otherwise, without prior permission of the 

copyright holders. 

Cover image courtesy of 

FA Systems Automation (S) Pte Ltd 

CONTENTS 

3 

4 

5 

6 

48 

62 

88 

FOREWORD 

MESSAGES 

OVERVIEW OF SINGAPORE’S 

COMPLEX EQUIPMENT INDUSTRY 

SYSTEM INTEGRATORS 

SHEET METAL FABRICATORS 

PRECISION MACHINING 

SECONDARY PROCESSES AND 

SUPPORTING INDUSTRIES

FOREWORD 

SPRING Singapore

MESSAGE 

Economic Development Board 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

OVERVIEW OF SINGAPORE’S 

COMPLEX EQUIPMENT 

INDUSTRY

SYSTEM 

INTEGRATORS

System Integrators Sheet Metal Fabricators Precision Machining Secondary Processes 

and Supporting Industries 

Avi-Tech Electronics Ltd 

Key capabilities: 

Total burn-in solutions provider 

- Semiconductor burn-in, test and inspection services 

- Tape and reel services 

- Design and manufacture of burn-in boards and boards-related 

products (PCBA manufacturing) 

- Full turnkey project services (built to design) and equipment 

manufacturing (design and build) services (box build/system 

integration) 

- Life sciences equipment and instrument contract/outsource 

manufacturing 

- Technical services such as field service and application support for all 

third party equipment distributed 

- Equipment distribution including equipment and related products 

used in the semiconductor industry, in particular, third party burn-in 

and test equipment 

Certifications 

ISO 9001: 2000 

ISO 14001 

ISO 13485 

Established in 1981, Avi-Tech Electronics has 

grown to become a leading one-stop total burnin 

solutions provider to the semiconductor 

industry in the Asian region. Capitalising on 

the equipment build experience and supply 

chains developed through the years, Avi-Tech 

has also diversified to the systems integration 

business in the life sciences industry. It has 

established market presence in Singapore, 

Taiwan, Malaysia, China, Thailand and the 

Philippines, as well as in the US and Europe. Its 

major customers are key players in the global 

semiconductor business and life sciences 

industries.. 

Headquartered in Singapore, with a staff 

strength of about 250, the company has 

production facilities in both Singapore and 

China. Its Singapore facility boasts over 120 

burn-in systems, supporting the burn-in of 

different semiconductor device types ranging 

8 

from microprocessors, memories and microcontrollers, 

to automotive control circuits 

and custom-made chips. Many of its burnin 

systems are designed and fabricated inhouse. 

Other manufacturing activities in the 

Singapore facility include system integration 

of life sciences products. 

Avi-Tech was conferred the Singapore Quality 

Class award by SPRING Singapore in 1998, 

with renewals for this award in 2001, 2003 

and 2005. In 2008, the company was 

awarded the Singapore Quality Award for 

business excellence. They were also awarded 

the Enterprise 50 award by the Singapore 

Economic Development Board in 1999 

(Ranking: 1st), 1998 (Ranking: 31st) and 1997 

(Ranking: 41st). It has also received numerous 

customer appreciation awards in recognition 

of its product excellence. 

Design and manufacture of burn-in boards and boards-related 

products 

- Engineering services and equipment distribution 

- Full turnkey system integration services (built to design) and 

equipment manufacturing (design and build) services including parts 

procurement and fabrication, assembly and verification 

- Technical services such as field service and application support for all 

third party equipment distributed 

- Equipment distribution including equipment and related products 

used in the semiconductor industry, in particular, third party burn-in 

and test equipment 

Major equipment list (Boards Manufacturing): 

- Mydata SMT component placement machine 

- Heller hot air reflow oven 

- SMT solder/paste screen printer 

- CE-OLAMEF axial forming machine 

- CE-OLAMEF radial lead forming machine 

- ERSA soldering machine 

- Electrolux washing machine 

- Despatch board baking oven 

- Mini solder pot rework station 

- JBC hot air flow repair station 

- TSE Boss triple CES‚ tester 

- MCC tester 

- Polar short locator 

- Nikon microscope 

- PCB separator 

Contact information: 

Avi-Tech Electronics Ltd 

19A Serangoon North Avenue 5 

Singapore 554859 

Tel: +65 6482 6168 

Fax: +65 6482 6123 

Email: philipk@avi-tech.com.sg 

www.avi-tech.com.sg 

9



Benchmark Electronics Singapore Manufacturing Pte Ltd 

Key capabilities 

Manufacturing Services: 

- System assembly, integration and test 

- Box build 

- Electromechanical assembly 

Engineering and Equipment Services: 

- System assembly and test 

- Precision process and test equipment 

- Equipment replication 

- Engineering design and customisation 

- Engineering prototype 

- Product life cycle management 

Fulfilment Services: 

- Product distribution 

- Merge-in-transit 

- Warranty service and repair 


Benchmark Electronics Singapore Manufacturing Pte Ltd 

2 Woodlands Sector 1 

#01-21/23 Woodlands Spectrum 1 


Tel: +65 6586 8000 

Email: Mark.Thng@bench.com 

www.bench.com 


ISO 9001 : 2008 

ISO 13485 : 2003 

ISO 14001 : 2004 

SSQA Quality 

Management 

System 

CSA 

(Telecommunication 

products) 

CT-PAT 

Compliance 

(Front-end 

semiconductor 

products) 

Benchmark Electronics is a multinational 

corporation with 20 plants spread over 10 

countries. In total, the company has a staff 

strength of 10,000 and is listed on the New 

York Stock Exchange. A top EMS provider with 

US$3-billion revenue, the company possesses 

a sturdy balance sheet with strong cash and 

long-term investments of US$453 million. 

At its facility in Singapore, the company 

manufactures and integrates wafer fab 

equipment for front-end and back-end 

semiconductor OEM, process equipment 

for the storage market segment and box build 

for the telecommunications sector. In addition 

to its expertise in low volume/high mix and 

medium volume/medium mix assemblies and 

complex equipment integration, the facility 

has strong capabilities in engineering design, 

equipment replication, prototype assembly 

and customisation. 

Customer-dedicated support teams provide 

the edge in meeting and exceeding customers’ 

expectations. 

TAA Designated 

Country 

(Singapore) 

BizSAFE 

Workplace 

Safety and 

Health 

Management 

System 

(WSHMS) 

10 

11



CEI Contract Manufacturing Limited 


- Printed circuit board assemblies 

- Boxbuild assemblies 

- System assemblies 

- Circuit layout 

- Functional design 

- Design and manufacture of its own brand of equipment for the 

semiconductor industry 

Major equipment list: 

- 3D CAD software (solid edge) 

- High level programming tools for C++/Visual Basic language and 

networking development 

- Assembly equipment – SMT printers and mounters, IC placer, etc. 

- Wave/reflow/cleaning – reflow oven, wave solder, etc. 

- Testers – ICT testers and functional testers. 

Overseas presence: 

- Batam, Indonesia 

- Ho Chi Minh, Vietnam 

- Shanghai, China 


CEI Contract Manufacturing Limited 

No 2 Ang Mo Kio Avenue 12 


Tel: +65 6481 1882 

Fax: +65 6481 9662 

Email: tankh@cei.com.sg 

www.cei.com.sg 


ISO/ 

TS16949:2002 

ISO 14001:2004 

ISO 9001:2008 

ISO 13485 

UL508A 

AS 9000 

(Letter of 

Conformance) 

6 Sigma 

Training and 

Deployment 

CEI Contract Manufacturing Limited was 

listed on the main board of the Singapore 

Exchange Securities Trading Limited in March 

2000. The company provides printed circuit 

board and box-build assembly, equipment 

design and manufacturing services. It is well 

equipped to provide value-added services 

such as materials management, circuit layout, 

prototype and development engineering, 

metal stamping and precision-machined 

components. 

CEI serves customers in the industrial 

equipment market segment. These include 

electro-luminescent displays used in industrial, 

transportation and medical applications, 

medical and healthcare equipment, office 

equipment (digital photocopiers), analytical 

instruments (gas and liquid chromatographs 

and measurement instruments), industrial 

safety controllers and environmental sensors, 

front- and back-end semiconductor equipment 

and SMT equipment. 

Headquartered in Singapore, it has 

manufacturing sites in Singapore, Batam 

(Indonesia), Ho Chi Minh City (Vietnam) and 

Shanghai (China). 

12 

13



Encus International Pte Ltd 


- High complexity product design – mechanical, electrical, firmware 

and software design 

- High precision sheet metal fabrication 

- Mechanical and electro-mechanical sub-assemblies and turnkey 

manufacturing services 

- Cosmetic sheet metal manufacturing 

- Program management – ATMs, kiosk systems, industrial equipment, 

medical equipment, consumer electronics 


ISO 9001 

Founded in August 2004, Encus International 

is headquartered in Singapore. Its core 

competencies are in high-value customised 

systems assemblies and sheet metal forming 

manufacturing. 

Encus has two operations sites: a 40,000 

sq ft (3,716 sq m) facility in Singapore that 

specialises in high-mix low-volume (HMLV) 

customised systems, and a 40,000 sq ft (3,716 

sq m) facility located in Shanghai, China, that 

specialises in mid- to high-volume cosmetic 

metal components. 

The company also boasts two global sales 

offices in Glasgow, Scotland and New Jersey, 

USA. These were established to support 

its overseas clients and queries. Encus 

International’s services include turnkey 

manufacturing, electro-mechanical assembly, 

mechanical assembly, sheet metal fabrication, 

product design, engineering, tool design and 

program management. 


- Laser cutting machines 

- Turret punching machines 

- Press brakes (Amada) 

- Hairline machines 

- CMM 

- TIG, MIG, spot welding 

- Spray painting and powder coating facilities 

- E-coating facilities 

- Anodising facilities 



- San Diego, USA 

- New Jersey, USA 

- Glasgow, Scotland 


Encus International Pte Ltd 

8 Tuas West Ave 


Tel: +65 6897 8289 

Fax: +65 6897 8089 

Email: enquiry@encus.com 

www.encus.com 

14 

15



ETLA Limited 


- High precision and complex metal components and modules 

- Wide range of materials capabilities including castings and extrusions 

- Surface finishing and heat treatment services 

- Highly precise fabrication parts for sheet metal fabrication 

- High-mix, low-volume production capability 

- CNC laser cutting/abrasive cutting (up to 12mm thick stainless 

clean-cut, and 20mm mild steel plate) 

- CNC turret punching 

- CNC combo laser cut and turret 

- CNC press brake bending/tube bending 

- Robotic contour welding/gas-metal arc welding/spot welding/ 

orbital weld 

- Robotic YAG laser welding (up to 4mm welding depth on stainless 

steel material) 

- Surface finishing – wet spray painting, powder coating, sand 

blasting, hair-line texture and polishing 

- Cellular production 

- Mechatronics assembly including high precision motion control and 

vision guided handling systems 

- Mechanical and electrical assembly 

- Supply chain management including internationally sourced OEM 

parts 

- System integration and test 

- Full turnkey project management including technical order and 

configuration management 


ISO 9001 : 2000 

ISO 13485 : 2003 

ETLA Limited is a subsidiary of Frencken 

Group Limited, a global contract manufacturer 

that is committed to providing complete 

and integrated outsourcing solutions to its 

customers in the capital equipment and 

consumer industries. Frencken Group Limited 

is a public corporation listed on the Mainboard 

of the Singapore Exchange since May 2005. 

As part of Frencken Group’s mechatronics 

division, ETLA offers complete solutions for 

the manufacture of highly complex precision 

machining and sheet metal components, 

as well as the assembly and integration of 

complex modules, systems and equipment 

for the medical, semiconductor, analytical and 

industrial automation industries. 

Its core competencies include value 

engineering, prototyping, program 

management, supply chain management, 

precision machining and sheet-metal 

fabrication, surface finishing, modular and 

equipment system assembly, integration, test 

and commissioning. 

Its Singapore facility is spread over 12,000 

sq m (129, 166 sq ft) and supported by its 

production in facility Bangi, Malaysia. These 

facilities are well equipped with a range of 

precision machining, sheet metal fabrication 

and final test and assembly machinery 

and equipment. Backed by project teams 

of experienced personnel with extensive 

application knowledge and technical knowhow 

in various manufacturing and assembly 

processes, ETLA provides integrated solutions 

to meet its customers’ outsourcing needs. 


- CNC milling – 3-, 4-, 5-axis vertical 

- CNC milling horizontal (with pallet change ) 

- Double-column 5-face vertical machine 

- CNC turning machines 

- CNC coordinate measuring machine, includes portable FARO arm 

- 2D/3D programming tools 

- Leak test detector 

- CNC coordinate measuring machine (motorised probe head) 

- Spectrophotometer, thickness, surface roughness and gloss meter 


ETLA Limited 

1 Changi North Street 2 


Tel: +65 6546 6466 

Fax: +65 6546 6466 

Email: barrysim@etla.com.sg 

www.etla.com.sg 

16 

17





- Builds customised equipment and standard equipment for use in the 

semiconductor industry, such as laser marking machines, advanced 

packages singulation saws, vision inspection machines, simplified IC 

test handlers 


Photonics: 

- Optical alignment system 

- Die attach machine 

- Semiconductors 

- Laser marking machine 

- Advanced packages singulation saw 

- Test handlers 

- Lead frame handlers 

- Electronics 

- Modular-form flex-circuit test and handling machine 

- Flexible circuit process machine 

- Flex audit and inspect machine 


ISO 9001 

Seagate SOP39 

Hewlett Packard 

SSME, CE mark 

& UL certification 

FDA 

Established in 1988, FA Systems is a reputable 

and well-established organisation providing 

advanced manufacturing equipment and 

solutions. 

The company offers full turnkey manufacturing 

systems and solutions that are customised to 

meet its customers demanding specifications 

from conceptualisation, design and 

development, precision machining, quality 

assurance, assembly and integration, testing 

and commissioning, as well as contract 

manufacturing. Its customers are located 

across the globe and include some of the 

world’s leading blue-chip organisations in 

the fields of semiconductors, electronics, 

hard disk/media, LCD, automotive, contract 

manufacturing, bio-medical, photonics and 

others. 

FA Systems has also successfully developed, 

manufactured and commissioned equipment 

complying with the European CE mark, 

Seagate SOP39, Hewlett Packard SSME, UL 

certification and equipment complying with 

the requirements of cleanroom class 10. 

Medical: 

- High-speed syringe assembly system 

- Syringe printing machine 


- Thailand 

- Malaysia 

- Philippines 

- South Korea 

- Indonesia 

- China 

- USA 

- Mexico 

- Puerto Rico 

- Europe 



36 Changi South Street 1 


Tel: +65 6546 2775 

Fax: +65 6546 2776 

luakimteng@fasystems.com.sg 

www.fasystems.com.sg 

18 

19



Flextronics International 


- Complete design, engineering and manufacturing services 

- Designs, builds, ships and services electronic products 

UL 

(Underwriters 

Laboratories) 


ISO 

9001 : 2000 


- China 

- India 

- Malaysia 

- Japan 

- Korea 

- Taiwan 

- Indonesia 

- USA 

- Brazil 

- Mexico 

- Canada 

- Ireland 

- Hungary 

- Poland 

- Netherlands 

- Austria 

- Romania 


Flextronics International 

2 Changi South Lane, Singapore 486123 

Tel: +65 6890 7188 

Email: asia.sales@flextronics.com 

www.flextronics.com 

ISO/TS 16949 

ISO 14000 

ISO 

14001: 

2007-2010 

OHSAS 18001 

TUVrh 

QS 9000 

ISO 13485 

TQM 14218 

TQM 23800 

TUVps 

Flextronics offers the broadest worldwide 

EMS capabilities, from design resources to 

end-to-end vertically integrated global supply 

chain services. The company designs, builds 

and ships complete packaged products for 

its OEM customers and provides after-market 

and field services to support customer endto-end 

supply chain requirements. 

Flextronics provides more value and 

innovation to customers by leveraging its 

global economies of scale in manufacturing, 

logistics, procurement, design, engineering 

and ODM services across a wide range of 

products and customer segments. It operates 

in 30 countries with a world-class work 

force and well-diversified customer market 

segments and business units. 

In Singapore, Flextronics serves two major 

market segments, namely industrial and 

medical. The industrial segment offers 

customised services for customers’ products 

and its vertically integrated services include 

metal fabrication and stamping, plastics 

injection moulding, tool design and 

manufacturing, and enclosure systems. These 

mechanical solutions are integrated with PCBA 

and final assembly manufacturing capabilities 

to deliver a full product solution. 

Flextronics’ medical segment provides 

world-class design, manufacturing, and 

logistics solutions to medical device and 

equipment companies. It provides a broad 

set of capabilities for medical customers 

in the invitro-diagnostic, drug delivery, 

and lab equipment industries. All activities 

are overseen by a world-class quality and 

regulatory team, ensuring compliance with 

ISO 13485, ISO 14971, IEC 60601, and 

other state, federal and international medical 

standards and practices. 

20 

21



Fong’s Engineering & Manufacturing Pte Ltd 


- Precision machining, assembly and testing services 

- Precision machining of components 

(build-to-print or customised) 

- Electro-mechanical and opto-mechanical design, 

assemblies and testing 

- Box build for medical instruments and communication 

system equipment 

- Optical design 

- Mechanical design 

- Full turnkey products 


- 3- and 4-axis CNC machining centre 

(Mazak, Makino, Hurco) 

- 5-axis CNC machining centre (Decker Maho, Hurco) 

- CNC lathe c/w sub-spindle and 5-axis milling (Mori Seiki) 

- CNC lathe c/w 4-axis milling (Mazak) 

- Integrex 100 III series (Mazak) 

- Super quick turn 100 MSY (Mazak) 

- Quick turn nexus 150 (Mazak) 

- CNC turning centre GLS 200, GS460 (Goodway) 

- CNC lathe (Dainichi/ Tonaldo) 

- Internal grinding machine G27-55NC (SEIKI) 

- Auto thread submer type wire cut machine, 

AU-500iA (Accutex) 

- Horning (Delapena) 

- Lapping (Kemet) 

- Universal cylindrical grinding machines (SEIKI) 


ISO 9001: 2000 

ISO 13485: 2003 

ISO 14000: 2004 

FDA-certified 

as contract 

manufacturer for 

medical devices 

since 2008 

With a 2,141 sq m (23,045 sq ft) production 

area in Singapore and a 2,400 sq m 

(25,800 sq ft) production area in Nantong, 

China, Fong’s Engineering and Manufacturing 

is well-equipped to offer state-of-the-art 

manufacturing technologies to its global 

customers. 

With over 70 CNC high-tech precision 

machines and a new 930 sq m (10,000 

sq ft) assembly business unit, Fong’s 270 

dedicated and skilled employees manufacture 

and assemble high-end mechanical, electromechanical 

and opto-mechanical components, 

modules or systems for the bio-medical, 

defence, electronics, optics, communication, 

and oil and gas industries. 

Fong’s Engineering regularly improves and 

updates its products and processes. The 

company believes that productivity and 

achievement of strategic goals are a matter 

of people. People are its key resource and 

with good management, the organisation and 

its staff consistently deliver on their objectives 

and strategies. 


- Nantong, China 


Fong’s Engineering & Manufacturing Pte Ltd 

79 Loyang Way 


Tel: +65 6785 6465 

Fax: +65 6785 1001 

Email: jeremy@fongspl.com.sg 

www.fongspl.com.sg 

22 

23



Fujicon Engineering Pte Ltd 


- One-stop-shop solution for automation systems and equipment 

including design and development, prototyping, build-to-print, 

control systems, fabrication and assembly, installation and 

commissioning 

- Machine certifications in CE, UL, CSA, RoHs, Weee 

- Medtech documentation 

- Pilot production 

- Contamination management and consultancy 

- Onsite global support 


- CAD and CAM up to 5-axis machining 

- CNC precision milling/turnmill 

- Conventional milling/turning/grinding/CG 

- DNC shear, bend, press, notch, weld 

- QC: X-Ray, CMM, projector, scope 

- PLC, PC, network control development tools 

- Mock-up tools for machine development 

- Cleanbench 


ISO 9001: 2000 

cGMP 

GAMP 

Established in 1984 with just a handful of 

mechanics, Fujicon has grown to become a 

70-men one-stop systems house provid ing 

a wide range of handling systems for factory 

automations. Its services range from design, 

development, mechanical and software 

integration, right up to piece part fabrication. 

As a fundamental auto solutions provider, 

Fujicon has stayed relevant to various 

regional industries including, but not limited 

to medical, automotive, semiconductor, LED, 

pharmaceuticals, timepiece and aerospace. 

Its export markets stretch beyond Asia to 

include Germany, Switzerland, Ireland, the 

US and Mexico. 

In the medtech area, Fujicon has accumulated 

more than 10 years of experience working 

with several prestigious device manufacturers 

and pharmaceutical companies in in-line dried 

powder packaging (back-end), blood flow 

device assembly, blood flow device testing, 

volumetric tube coiler and degators (multicapacity), 

among others. 

Besides being ISO 9000-certified, Fujicon 

also adopts cGMP, GAMP practices and 

custom builds machine systems that comply 

to CE, UL, CSA, RoHS and WEEE standards. 

To address the increasing demands in the 

medtech field, it has a network of factories 

and offices in Seremban, Penang, Bangkok and 

Shanghai, all of which offer quick response to 

their customers’ needs. 

Fujicon is determined to continuously develop 

high-speed, sophisticated special purpose 

machines and provide contract manufacturing 

services for equipment makers. 


- China 

- Thailand 

- Indonesia 

- Malaysia 


Fujicon Engineering Pte Ltd 

No 2 Tuas Link 1 

Jurong Industrial Estate 


Tel: +65 6863 4011 

Fax: +65 6863 4022 

Email: gl_toh@fujicon.com.sg 

www.fujicon.com.sg 

24 

25



Getech Automation Pte Ltd 


- Customised automation for the medical, military and 

electronics industry 

- SMT assembly machines for the electronics industry 


ISO 9001 : 2000 

Getech Automation was set up in 1992 

to meet the needs of the PCBA and 

semiconductor industries. Today, over 

4 million PCB panels are routed daily by 

Getech machines. The company has earned 

a global reputation for consistent results and 

specialised expertise, particularly in robotic 

applications and high-end automation 

projects. 

Supported by its global network of trained 

and experienced agents, its standard 

machines — which include fully automatic 

PCBA routers, odd form component pick 

and place machines, marking machines and 

label placement machines — can be found 

installed in MNCs globally. 

Getech boasts capabilities as a systems 

integrator as well as a turnkey project 

specialist. In addition to its capacity for 

mechanical and electrical design, fabrication 

and assembly, the company has a dedicated 

in-house software development team. As an 

ISO 9001:2000 certified company, it has 

experience in building machines with various 

kinds of standards such a SEMI and CE. 


PCB Routing (de-panelling) machines 

Epson test handlers/robots 

PCB Routers 

- Standalone 

- Semi automatic router machine – GSR 

- Economic semi automatic router machine – ESR 

Inline Routers 

- Dual station router with board handling machine – RBM 

- Pre route machine – PRM 

- Gripper router machine - GIR 

- Dicing machine - IDM 

SMT assembly machines 

- Marking system – GMS 

- Auto label placer - ALP 

- Odd-form placement – OFP 

- Board gauging system – BGS 

- Finished board handler - FBH 

- Fine pitch CSP placement– FCA 

Medical 

- Lancet inspection and assembly machine – LIAM 

- Out-patient automated drug dispending system - OPAS 

Live munitions 

- Cartridge inspection, marking and packing line – CIMP 

- Cartridge weighing, measuring machine - CWMM 

- Live munitions: safety fuse assembly machine – SFA 

- Govenor assembly machine - GAM 

Test Automation 

- Vertical socket level testing system – VSLT 

- Gasket dispensing machine – GDM 


Getech Automation Pte Ltd 

201 Woodlands Ave 9 

#05-50 Woodlands Spectrum 2 


Tel: +65 6756 9710 

Fax: +65 6756 0770 

Email: sales@gatecha.com 

www.getecha.com 

26 

27



HISAKA (Singapore) Pte Ltd 


- Automation solutions provider specialising in mechanical motion 

products 

- A broad and comprehensive range of products across business 

segments and industries, including metallic precision manufacturing, 

design, integration and commissioning of mechatronics systems 

- Strong supply chain management process 


- Milling machine 

- Turning machine 

- Grinding machine 

- Keyway machine 

- Horizontal CNC lather machine 

- CNC lathe 

- Video measuring machine 

- Laser marking machine 

- Belt jointing machine 

- Belt cutting machine 

- CNC milling machine 

- CNC turn-mill machine 

- CNC turning machine 

- Surface grinding machine 

- Cylindrical grinding machine 


ISO 9001 : 2008 

Pending 

GDPMDS and 

ISO 13485 

certification 

Since the establishment of HISAKA (Singapore) 

Pte Ltd in 1992, the company has grown 

from a small trading firm to become an 

automation solutions provider specialising 

in mechanical motion products. Our business 

can be classified into two key segments: the 

services segment; and the manufacturing 

segment, with supply chain management 

forming an integral part of both. 

The service segment consists of mechanical 

motion components management while the 

manufacturing segment comprises metallic 

precision manufacturing and mechatronics 

Integrations. Under supply chain management, 

the company provides value-added services 

such as logistics and inventory management; 

administration and customer service 

management; and the technical support 

management, for customers. Based in 

Singapore, HISAKA also has offices in China, 

Thailand and Malaysia. 

As testament to its business success, 

HISAKA(Singapore) has also been awarded 

Enterprise 50, SME 500, and the Top 

Internationalising SMEs award. HISAKA 

(Singapore) is also ISO 9001:2008 certified 

and is currently in the midst of attaining 

GDPMDS and ISO 13485 certification. HISAKA 

(Singapore) is a subsidiary of Mainboard-listed 

HISAKA Holdings Ltd. 

HISAKA Holdings Ltd. is looking to further 

develop its expansion initiatives in the medical 

equipment, eco-solutions and infrastructure 

industries. The Group has successfully 

completed several projects in these fields 

and are continuing its efforts to strengthen 

its foothold in the medical and eco industries. 



- Malaysia 

- Thailand 


HISAKA (Singapore) Pte Ltd 

No. 63 Sungei Kadut Loop 

Hisaka Industrial Building 


Tel: +65 6455 1311 

Fax: +65 6455 0311 

Email: marketing@hisaka.com.sg 

www.hisaka.com.sg 

28 

29



Jabil Circuit (Singapore) Pte Ltd 


- Design assurance 

- Electrical engineering 

- Industrial design 

- Mechanical engineering and design 

- PCB design 

- Software/firmware experience 

- Tooling engineering 


- DEK screen printer 265 Infinity 

- Universal chip shooter Advantis AC-30L 

- Universal odd component placer GSM 2 

- Vitronic Soltec XPM2-1030 reflow oven 

- Vitronic Soltec Delta Wave 

- Paste height inspection machine, Vision Master AP212 

- BGA rework station SRT-Summit 1100 

- Fein focus FXS10-23 x-ray inspection machine 

- Genrad ICT tester GR 2286 

- Dataman programmer 


ISO 9001: 2000 

ISO 14001: 2004 

OHSAS 

18001: 2008 

AS 9100 Rev B 

FAR 145 


Jabil Circuit (Singapore) Pte Ltd 

620 Lorong 1 Toa Payoh 

Level 4 


Tel: + 65 6882 4800 

Fax: +65 6254 4348 

Email: Waichong_sheetoh@jabil.com / Connie_tan@jabil.com 

www.jabil.com 

Jabil Circuit is an electronics solutions 

company that provides comprehensive 

electronics design, production and product 

management services to global electronics 

and technology companies. 

Jabil’s roots lie in the assembly and testing 

of printed circuit boards. Today, it supports 

high-mix and low-mix PCB and backplane 

assembly for volumes that range from a few 

units for prototypes to hundreds of thousands 

in volume production. Jabil Singapore is also 

the only JDAS site in Asia specialising in 

aerospace and defence products, complex 

conformal coating, military-standard BGA and 

wire harnesses. 

Its assembly services are complemented by 

front-end product development capabilities 

including strong CAD layout and design 

experience. Naturally, quality always 

comes first — the company employs DFX 

fundamentals as well as quality and datatracking 

methodologies. 

Advanced technology development and a 

global reach allow Jabil to be responsive to its 

customers’ product design needs. It effectively 

builds in solutions that lower costs throughout 

the product’s life cycle. The company’s design 

capabilities range from subsystem and full 

turnkey product designs to cost reductions 

for existing designs. 

30 

31



Kinergy Ltd 


- Original design, manufacture and assembly of complete machines 

- Value-added engineering services to improve on customers’ existing 

designs and further development of their products 

- Assembly of components that form critical modules to equipment and 

machines 

- Manufacture of mechanical and electrical components 

- Design, development and manufacture of machines used in the 

semiconductor back-end assembly process such as auto frame 

loader, dry auto-buffing machine, strip laser marking system, highspeed 

servo trim and form system 

- Design, development and installation of precision tools to the 

accuracy of 2 microns – encapsulation moulds and trim and form dies 


ISO 9001: 2008 

ISO 14001: 2003 

ISO 13485: 2003 


- CNC milling – 19 units 

- Milling – 9 units 

- CNC – 18 units 

- Grinder – 34 units 

- Supporting equipment – 10 units 

- QC tools – 6 units 


Kinergy Ltd 

Block 5002 Ang Mo Kio Avenue 5 

Techplace II #03-08 


Tel: +65 6481 0211 

Fax: +65 6482 1681 

Email: BuzDev@kinergy.com.sg 

www.kinergy.com.sg 

Established in 1988, Kinergy is one of the 

region’s leading high-tech equipment contract 

manufacturers, synonymous with top quality 

and innovative solutions. Its business is divided 

into two divisions, namely EMS and OEM. 

Kinergy’s EMS division focuses primarily on 

the high-mix low-volume contract design 

and manufacturing of microprocessorcontrolled 

automated equipment and subsystems 

for OEMs for the semiconductor 

industry’s front- and back-end processes. 

It also serves the medical, pharmaceutical, 

packaging, automation and aeronautical 

industries. 

The company’s OEM division designs and 

manufactures proprietary equipment such 

as microprocessor-controlled automated 

machines under the Kinergy brand for use 

mainly in the semiconductor assembly and 

test industry. 

Kinergy works closely with its customers to 

customise proprietary designs in accordance 

with their requirements. These designs 

continue to be proprietary to the company and 

may be used in the production of machines for 

its other OEM customers. The OEM division 

also fabricates, commissions and provides 

maintenance services for its machines. 

32 

33



Manufacturing Integration Technology Ltd (MIT) 


- High-end range of die marking, sorting and inspection systems for IC 

manufacturing 

- Laser scribers (and related laser handling systems) for production of 

thin film solar panels 

- High-end vision inspection systems for semiconductor and generic 

manufacturing applications 

- Contract Equipment Manufacturing (CEM) 

- Precision machining and product assembly 

Overseas Presence: 

- Shanghai, China (focuses on precision machining and assembly) 


ISO 9001: 2000 

ISO 14001: 2004 

ISO 13485: 2003 


Manufacturing Integration Technology Ltd 

Block 5004, Ang Mo Kio Avenue 5 

#03-12, TECHplace II 


Tel: +65 6481 0511 

Fax: +65 6481 8955 

Email: siak@mit.com.sg 

www.mit.com.sg 

Incorporated in 1992 and listed on the 

Singapore Exchange since 1999, MIT is a 

leading provider of integrated automation 

solutions for the semiconductor industry 

worldwide. Its range of high-end equipment 

includes wafer level die marking and sorting 

and inspection systems used in the IC 

manufacturing and assembly process. 

Thanks to a strong base in precision 

engineering and domain knowledge in 

semiconductor equipment, the company was 

able to diversify into the renewable energy 

market by designing and producing solar 

equipment for the photovoltaic industry. The 

company has also expanded its business to 

provide contract equipment manufacturing 

and precision machining services to broader 

markets with a footprint in Shanghai, China. 

34 

35



MEMS Solutions Pte Ltd 


- Contract manufacturer for electro-mechanical systems integration 

- Product design and prototype development 

- Mechanical engineering 

- PCB circuit design 

- CPU firmware development 

- Electrical and electronic assembly 

- Harness development 

- Software creation 

- Data capture 

- Final production manufacture 


ISO 9001: 2008 

ISO 13485 : 2003 


- UK (Manchester) 


MEMS Solutions Pte Ltd 

60 Ubi Crescent 

# 01-01 Ubi Techpark 


Tel: +65 6742 9512 

Fax: +65 6742 9501 

Email: shleow@memss.com.sg 

www.memss.com.sg 

Established in August 2003, MEMS Solutions 

was formed by a group of young professionals 

with years of experience in supporting HDD 

and semiconductors in the areas of materials 

handling and automated equipment solutions. 

The company capitalises on these capabilities 

to provide the same services to the bio/life 

sciences industry. Its vision is to become 

Asia’s leading contract manufacturer for 

electro-mechanical systems integration. 

MEMS combines the best of high-tech product 

development options with the cost-effective 

benefits of the Asia Pacific industrial economy 

to deliver the highest opportunity benefits 

and value-added engineering. With a clear 

understanding of true project costs, it focuses 

on competitive delivery at all stages of the 

product lifecycle. 

MEMS is geared mainly for low-volume, 

high-mix manufacturing operations ranging 

from handheld instruments and bench-top 

workstations to factory floor automated 

assembly systems. It can fully support 

product design and prototype development, 

mechanical engineering, PCB circuit design, 

CPU firmware development, electrical and 

electronic assembly and harness development 

through to final production manufacture. 

36 

37



Singapore Aerospace Manufacturing Pte Ltd 


- Special processes: TIG, MIG, robotic welding, plasma welding, 

brazing, sulfuric anodising, shot peening, glass bead peening, 

heat treatment, chemical cleaning (UHV), blue-etch 

- Non-destructive testing: FPI, MPI, ultrasonics, x-ray 

- Powder coating and wet painting 

- Sheet metal, frame and structural fabrication 

- Factory automation and material handling solutions provider 

- Equipment contract manufacturing and system integration in 

class 10k environment 


ISO 9001:2000 

AS 9100 


- 5-axis and 4-axis CNC milling up to 3.4 m 

- 5-face CNC milling up to 2.5 m x 5m x 1.6 m 

- Turning up to 2.5 m diameter 

- Laser cut, turret punching, and press brake up to 125 tons 


- Singapore 

- Germany 

- Malaysia 

- China 

- Thailand 


Singapore Aerospace Manufacturing Pte Ltd 

51 Corporation Road 


Tel: +65 6668 8787 

Fax: +65 6262 2230 

Email: limpeter@sam.sg 

www.sam.sg 

Singapore Aerospace Manufacturing (SAM) 

is a subsidiary of Accuron Technologies and 

headquartered in Singapore. With 1,200 

employees across Asia and Europe servicing 

the aerospace and industrial equipment 

industries, SAM is equipped with cutting 

edge manufacturing capabilities to service 

leading global companies in these respective 

industries. The company provides quality 

aerostructural parts and assemblies for global 

players, focusing primarily on actuators, engine 

mounts, airfoils, engine cases and landing 

gears. 

38 

39



Sys-Mac Automation Engineering Pte Ltd 


- Precision machining 

- Custom design engineering solutions 

- Electrical and electronics system integration 

- Full modular assembly 

- Testing and integration of machines 


- CNC milling 

- CNC turning 

- Conventional milling 

- Conventional turning 

- Surface grinding 

- Bending and shearing 

- MIG/TIG welding 

- Automatic CMM Measuring equipment 

- Height gauge 

- Profile projector 


ISO 9001 : 2008 

ISO 13485 : 2003 

Established as a precision engineering 

company in 1989, Sys-Mac Automation 

Engineering is constantly looking for new 

ways to increase the value of its products 

and services. Additionally, in order to offer the 

best products and services, Sys-Mac employs 

a team of experienced in-house engineers. 

Its team’s expertise ranges from design, 

electrical/electronics, software and assembly, 

to specific focus on the pharmaceutical, 

semiconductor, life sciences, electronics and 

marine industries. 

Sys-Mac employs close to 200 people in 

Singapore and Indonesia. The close proximity 

of its two manufacturing facilities helps the 

company to maximise the availability of its 

resources to manage both recurring orders 

and specialised precision engineering projects. 


Sys-Mac Automation Engineering Pte Ltd 

Blk 2 Woodlands Sector 1 

#05-18 Woodlands Spectrum 


Tel: +65 6510 6399 

Fax: +65 6758 4155 

Email: sales@sysmac.com.sg 

www.sysmac.com.sg 

40 

41



Ultra Clean Asia Pacific Pte Ltd 


- Systems integration 

- Chemical and gas delivery systems 

- Precision machining and welding 

- Sub-system and module assembly 

- Design for manufacturability 

- Complete product realisation 


ISO 2001 : 2008 


- China 

- USA 


Ultra Clean Asia Pacific Pte. Ltd 

2 Woodlands Sector 1, #05-22 

Woodlands Spectrum 1 


Tel: +65 6755 7577 

Fax: +65 6257 1336 

Email: mkristanto@uct.com 

Website: www.uct.com 

Ultra Clean Asia Pacific is a subsidiary of 

Ultra Clean Technology (UCT). UCT is a 

developer and supplier of critical subsystem 

and full system turnkey manufacturing for the 

semiconductor capital equipment, flat panel 

display, research, medical device and energy 

and environmental industries. 

UCT offers its customers a complete outsource 

solution for complex, highly configured 

equipment including improved design-todelivery 

cycle times, component neutral 

design and manufacturing, and component 

testing capabilities. We provide expert 

support in design engineering, design for 

manufacturing, new product introduction, 

supply chain management, quality and field 

service. 

UCT employs more than 900 people 

worldwide in its operations in USA, Singapore 

and China. 

42 

43



UMS Group 

Established in 2001, UMS Group’s core 

business is in high precision machining of 

large platform parts, special and chemical 

processes and contract manufacturing/system 

integrations and testing. The company serves 

the OEMs of semiconductor wafer fabrication 

equipment, oil exploration, aerospace and 

solar sectors. 

The Group is headquartered in Singapore 

with an additional 480,000 sq ft (44,600 sq 

m) facility in Penang, Malaysia. It also has an 

office in Fremont, USA and a vast network 

of global supply chains. Both its plants are 

equipped with state-of-the-art facilities and 

equipment, including cleanroom cleaning lines 

and cleanroom assembly and test operations. 


- Machining of high precision and complex large platform 

components 

- Processes wide range of material including inconel, 

titanium, alu, steel 

- Cleanrooms for system assembly, final integration, 

and test 

- Electro-mechanical and computerised final testing 

- In-house special processes including anodising, nickel 

plating, brazing, welding, chemical cleaning, plating, 

e-beam welding, electro-polishing, etc. 


- 5-axis DMG horizontal machining centres – 

L133.86 x W110.25 x H62.99 in 

- 5-Axis Mazak V730 horizontal machining centres 

- 5-Axis Mazak V630 horizontal machining centres 

- 5-Axis Mazak Integrex e500 turn-mill machining centres 

- 5-Axis Mazak Integrex e1060V8 horizontal machining 

centres 

- 5-Axis Mazak Integrex e1550V horizontal machining 

centres 

- OM Neo80 vertical turning lathes 

- Makino Mag3.Ex 

- CMM Mitutoyo – 2 m x 4 m 

- Profile projectors 

- Gauges 


ISO 9001:2000 

AS 9100 

ASQR-05 


- Penang, Malaysia 

- Fremont, USA 


UMS Group 

23 Changi North Rise Crescent 

Changi North Industrial Estate 


Tel: +65 6543 2272 

Fax: +65 6543 0623 

Email: kl_goh@umsgroup.com.sg 

www.umsgroup.com.sg 

44 

45



VDL Enabling Technologies Group (Singapore) Pte Ltd 

Part of the international VDL Group, VDL 

Enabling Technologies is spread over 75 

companies with 7,100 employees. Its plant 

in Singapore operates in the business of 

system integration of mechatronic (sub) 

systems and modules for OEMs in the hightech 

capital equipment industry and in the 

area of production mechanisation. As a 

system supplier, VDL Enabling Technologies 

covers the value chain from engineering and 

co-engineering through to parts production, 

assembly and testing. 

The company is committed to supporting 

its customers wherever their numerous 

manufacturing facilities are sited. 


- System integration and modules for OEMs 

- Covers the value chain from (co-) engineering through parts 

production to assembly and testing 

- Examples of parts manufactured include engine casings, 

wafer handling systems, process chambers, vacuum 

chambers, etc 


- CNC boring equipment 

- Co-ordinate drilling equipment 

- Wire cutting equipment 

- Surface grinding equipment 

- Round grinding equipment 

- CMM 

- Machining centres and large milling equipment 

- Turning equipment 

- Spot welding and micro welding equipment 


- Netherlands/Europe 

- China 


VDL Enabling Technologies Group (Singapore) Pte Ltd 

259 Jalan Ahmad Ibrahim 


Tel: +65 6508 0352 

Fax: +65 6265 7466 

Email: bob.shaw@vdletg.com 

www.vdlgroep.com 


ISO 9001: 2000 

DSQR for 

ISO 14001 

GE Aviation 

: 2004 

46 

47

SHEET METAL 

FABRICATORS



Dolphin Engineering Pte Ltd 


- Precision machining of large parts 

- Sheet metal and welding fabrication 

- Lathe turning 

- Assembly of turnkey projects 

- Engineering services 

- Customisation 


ISO 9001:2000 

ISO 14001 


- Large CNC mill (6,000mm x 3,300mm) 

- Large CNC mill (5,000mm x 2,500mm) 

- Plano NC mill (3,000mm x 1,800mm) 

- Surface grind (3,000mm x 1,400mm) 

- Lathe turning (1,800mm diameter) 

- CMM checking (X-1200 Y-1600 Z-1000mm) 

- Laser cutting, turret punch 

- Press brake & bending equipment 

- SMAW, MiG, TiG welding facilities 


- Malaysia 


Dolphin Engineering Pte Ltd 

2 Loyang Way 4 


Tel: +65 6741 5556 

Fax: +65 6741 5557 

Email: info@dolphin.com.sg 

www.dolphin.com.sg 

Dolphin Engineering was established in 1984 

and has grown rapidly to become one of 

Singapore’s leading precision engineering and 

fabrication service providers today. Over the 

years, the company has successfully served a 

diverse range of industries, delivering quality 

products that meet the requirements of clients 

at all times. 

Using the latest technology, its skilled work 

force ensures that its customers enjoy worldclass 

integrated engineering services at the 

most competitive prices. The company’s 

excellent customer service and strict 

adherence to ISO 9001:2000 standards 

have enabled them to draw clients from 

various engineering industries such as 

semiconductors, factory automation, contract 

equipment manufacturing, aerospace, metal 

stamping, tool and die and offshore. 

50 

51



Fine Sheetmetal Technologies Pte Ltd 


- Advanced design and engineering 

- Quick turn fabrication and assembly 

- New product introductions (NPI) and development 

- High-mix, low- and medium-volume production 

- Supply chain management/international procurement 

- Enclosure assembly 

- Mechanics integrations and testing 

- Painting for wet paint and powder coating 


ISO 9001: 2008 

ISO 14001: 2002 

Fine Sheetmetal (FSM) Group of Companies 

provides a full spectrum of integrated, 

value-added services including design and 

engineering services, production of complex 

assemblies, custom-designed sub-assemblies, 

indoor and outdoor custom enclosure systems, 

complete mechanics systems integration 

and testing. These services are provided to 

a diverse base of leading OEM companies in 

the semiconductor, high-end communications, 

storage, medical, military, tooling machinery 

and other sectors of the mechatronics industry. 

FSM utilises highly flexible responsive 

manufacturing facilities for their customers 

to provide unparalleled service and support. 

Each operation has its own manufacturing, 

quality, engineering, materials management 

and customer service teams that meet 

FSM’s internal standards for quality, delivery, 

technology and cost competitiveness. FSM is 

committed to providing its customers with a 

full range of services for fulfillment anywhere 

in the world. 


- Mitsubishi (M-VS20/15) CNC 5-face milling 3,000(L) X 1,500(W) X 

1,200(H) (accuracy 0.006) 

- Mitsubishi (MVR30) CNC 5-face milling 5,200(L) X 2,000(W) X 

1,500(H) (accuracy 0.005) 

- Mitsubishi (MVR35) CNC 5-face milling 6,200(L) X 2,500(W) X 

2,200(H) (accuracy 0.005) 

- Dahlih (DCM2213) CNC vertical milling centre 2,200(L) X 1,300(W) X 

760(H) (accuracy 0.005) 

- Amada (FO3015) CNC laser (4kw) 3,050(L) X 1,550(W) X 200(H) 

(accuracy 0.05) 

- Amada (FBX-NT8025) CNC bending (80 ton/2,500 lg) 

(accuracy 0.02) 


- Malaysia 

- China 


Fine Sheetmetal Technologies Pte Ltd 

12 Tuas Link 1 


Tel: +65 6863 6663 

Fax: +65 6863 6662 

Email: thtoe@fsmtech.com 

www.fsm-group.com 

52 

53



Hup Fatt Brothers Engineering (HFB) Pte Ltd 


- Precision sheet metal fabrication 

- Product development (CAD/CAM) 

- CNC laser cutting 

- CNC turret punching 

- CNC forming 

- Welding 

- Machining 

- Painting and electro-plating 

- Complete solutions in frames and covers with mechanical integration 


ISO 9000 


- Hartford 5-face double column milling centre 

- Trumpf TC 6000 laser punch machine 

- Trumpf L3040 laser profile cutting 

- Trumpf CNC V230 bending machine 

- Tumpf CNC V200 bending machine 

- Trumpf CNC C110 bending machine 

- Hairline surface finishing machine 

- Aluminum spot weld machine 


- Malaysia 

- China 


Hup Fatt Brothers Engineering Pte Ltd 

11 Woodlands Walk 


Tel: +65 6735 7135 

Fax: +65 6753 6581 

Email: soonguan@hupfatt.com.sg 

www.hupfatt.com.sg 

HFB is a specialist and pioneer in the product 

and service delivery of sheet metal fabrication 

and frame fabrication. The company has been 

in operation since the 1980s and has rapidly 

grown from a local manufacturing company 

with 20 employees to the conglomerate it is 

today with four manufacturing plants scattered 

across Asia. 

Its presence can be felt in Malaysia and China 

as regional strategic partners to its customers. 

With quality expertise, premium customer 

service and competitive pricing, HFB has 

become an industry leader. Its engineering 

solutions reduce manufacturing lead-time 

across the supply chain, while its processes 

are designed to ensure excellence through 

self-inspection, timely technology refreshment 

and innovation. 

54 

55



NCT Technology Pte Ltd 


- Turret process 

- Bending process 

- Welding process 

- Machining 

- Metal stamping 


ISO 9001 

Established in September 1994, NCT 

Technology produces excellent forming 

products of high accuracy with scratch-free 

finishing using Amada brush table turret 

machines. The company’s NC press brake 

is able to adapt to various bending conditions 

and spectrums, achieving consistent quality 

and accuracy for its customers. 

In step with the demanding industry, NCT 

offers a wide range of services such as spot 

welding, welding for mild steel, stainless steel 

and aluminum. It has also invested in power 

press stamping machines and assembly 

operations to compliment its services. 

To further enhance its capabilities and 

reduce cost to its customers, NCT designs 

and produces its own production tools with 

capabilities in wire cutting, machining and 

precision surface grinding. 


- Multi-pallet flexible machining system 

- Amada CNC turret punch press with Fanuc control system Amadan 

04P-C X 3 Units 

- Amada CNC turret punch press with Fanuc control system Amadan 

04P-C X 5 Units 

- Amada CNC turret punch press with Fanuc control X 9 Units 

- Amada FBD NC press brake 50 tons 



- Amada NC press brake 35 tons 

- NAS Toa spot welder 

- Amada hydraulic NC shear 

- PEMSerter 

- Chin Fong power press with date NC feeder 

- Amada 150-ton power press 

- 200-ton power press 






- Kuala Lumpur, Malaysia 

- Wuxi, China 

- Bintan, Indonesia 


NCT Technology Pte Ltd 


#03-31/33 Woodlands Spectrum 


Tel: +65 6753 8132 

Fax: +65 6753 2097 

Email: y.k.kee@nct.com.sg 

www.nct.com.sg 

56 

57



Techcom Technology Pte Ltd 


- Precise structural products 

- Sheet metal fabrication works 

- Machining products 

- Frame welding 

- Sub-assembly works 

- Subcontracting services 


ISO 14000 

ISO 9001 


- CNC laser cutter 

- CNC machining 

- CNC turret punch 

- CNC press brake 

- Welding –TIG/MIG 


- Shenzhen, China 


Techcom Technology Pte Ltd 


#03-01/03 Woodlands Spectrum I 


Tel: +65 6854 0445 

Fax: +65 6854 0446 

Email: sales@techcom.com.sg 

www.techcom.com.sg 

Techcom Technology is a fast-growing provider 

of high-quality, precision sheet metal, structural 

products, frame weldment, machined parts 

and sub-assembly work. It is renowned 

for its expertise in precision welding and 

has demonstrated excellence with proven 

track records and accolades from existing 

customers. Over the years, it has invested 

in a number of initiatives that has enabled 

its customers to benefit from considerable 

improvements in lowering costs and increasing 

operations efficiency and productivity. 

Techcom is capable of supplying precise 

sheet metal parts, structural products, 

frame weldment and machining parts for 

clients in industries such as semiconductor 

tool makers, electronics equipment makers, 

telecommunications, automotive, aerospace 

and medtech, among others. It develops 

solutions customised to its customers’ needs 

and to their evolving business dynamics, 

requirements and initiatives. 

58 

59



Techsteel Fabrication Pte Ltd 

Occupying a workspace that spans 33,000 sq 

ft (3,065 sq m), Techsteel Fabrication offers 

quality precision engineering services such 

as welding, frame and structure fabrication, 

precision sheet metal fabrication, mechanical 

sub assembly, as well as customisation of 

prototypes. 

Techsteel constantly aims to offer products 

and services that exceed its contractual 

requirements. In order to do this, it is 

committed to establishing a culture based 

on continuous improvement. It consistently 

reviews its quality goals and objectives and 

improves the skills of its work force regularly. 

The company was established in 1980 with 

a modest staff of 10. Today it employs more 

than 60 staff and is a strategic supplier to its 

customers around the globe. 


- Sheet-metal development, programming, pre-production analysis 

and evalution 

- 2D and 3D design, 3D graphical simulation and presentation, 

prototyping design evaluations 

- Laser cutting, CNC bending, turret punching 

- Welding – TIG and MIG 

- Spray painting and powder coating, surface preparation 

- Frame and structure fabrication 

- Mechanical sub-assembly 

- Full turnkey services 


ISO 9001: 2000 


- Amada AP100 CAD-CAM systems 

- Solidwork CAD-CAM software 

- Amada FO3015NT laser cutting machine 

- CNC bending machine 

- Timesaver belt/brush grinder machine 31 series 

- Pemserter Series 4 press 

- Euromac turret punching machine 

- Rolling machine 

- ZOPF pipe bending machine 

- Turning/milling machine 


Techsteel Fabrication Pte Ltd 

Blk 203 Woodlands Spectrum II 

#04-51/52 & 54 Woodlands Ave 9 


Tel: +65 6758 9639 

Fax: +65 6759 5348 

Email: sales@techsteel.com.sg 

60 

61

PRECISION 

MACHINING

System Integrators Sheet Metal Fabricators Precision Machining 

Secondary Processes 


A & One Precision Engineering Pte Ltd 


- Precision machining of components, sheet metal work 

and assembly of turnkey projects 


- Multi-pallet flexible machining system 

- Multi-axis CNC turn mill centre 

- 5-Face CNC vertical machining centre 

- Multi-axis CNC horizontal machining centre 

- Multi-axis CNC vertical machining centre 

- Multi-axis CNC lathe 

- High precision CNC grinding machine 

- Laser cut machine 

- Punch and form machine 

- Precision press brake 

- CNC coordinate measuring machine 

- Abrasive flow machine 


ISO 9001:2000 

AS 9100:2004 

A & One Precision was founded in 1992 and 

incorporated as a private company in 1994. 

Driven by a commitment to quality and total 

customer satisfaction, A & One has established 

itself as the premier service provider in the 

precision machinery industry, with unique 

characters and unmatched strength. Its 

customers range from data storage, 

semiconductor, equipment manufacturing, 

medical technology, aerospace, oil and gas 

and telecommunication industries. 

Over the years, the company has created 

a broad-based presence in the industry 

and continues to invest heavily in state-ofthe-art 

precision machinery such as multiaxis 

machining centres and ultra-precision 

measuring centres. 

There are numerous factors that make A & One 

the success that it is. Experience, technical 

knowledge, and the collective effort of its 

hardworking and dedicated staff are just some 

of a few. The company believes that human 

resources are its greatest assets. With its team 

of experienced and talented staff, A & One 

is committed to helping customers enhance 

their competitive advantage through cuttingedge 

technologies, and meeting all their 

exacting standards for quality and reliability 

— while at the same time achieving cost 

effectiveness to achieve the best value for 

its products. 

Today, the company is one of the leading 

precision engineering service providers in the 

region delivering a complete suite of services. 

Besides fabrication of precision processed 

components and sheet metal works, A & 

One is capable of providing customers with 

prototyping, assembly, integration, testing, and 

the commissioning of full turnkey projects, 

as well as the manufacturing of customised 

equipment. 


Factories in: 

- Kuala Lumpur, Malaysia 

- Wuxi, China 

- Bintan, Indonesia 


A & One Precision Engineering Pte Ltd 

30 Loyang Way 

#03-08 Loyang Industrial Estate 


Tel: +65 6543 1181 

Fax: +65 6542 1211 

Email: sales@a-oneprecision.com 

www.a-oneprecision.com 

64 

65




Advance Tech Automation Pte Ltd 


- Machining of components and parts 

- Design-and-build automated machines, equipment, jigs 

and fixtures 


- 3-, 4- and 5-axis machines 

- CMM, profile projector and smart scope 


ISO 9001:2000 

AS 9100 


- China 


Advance Tech Automation Pte Ltd 




Tel: +65 6457 3933 

Fax: +65 6457 1101 

Email: kenneth@avt-automation.com 

www.avt-automation.com 

Established in 2001, Advance Tech 

Automation boasts distinctive capabilities 

in the manufacturing of precision machining 

modules and the design, assembly and 

integration of equipment and automated 

assembly lines. With its wealth of experience, 

Advance Tech provides optimal precision 

engineering solutions with excellent after 

sales support in the region. 

The company has manufacturing facilities in 

Singapore and China, and representations 

in Southeast Asia and the Middle East. 

Its engineering solutions and production 

capabilities are highly sought after by 

some of Singapore’s biggest players in 

the semiconductor, IT and hard-disk drive 

industries. 

66 

67




Alcotec Precision Engineering Pte Ltd 


- Design and fabrication of quality replacement parts, engineering 

plastic products, test socket, docking interface solution and various 

types of test handler change kits for the semiconductor industry 

- High-speed precision machining of graphite and ceramic materials 

for the hard disk drive and medical industries. 

- Turnkey projects for automation equipment for the hard disk drive, 

medical and fibre optics industries. 


ISO 9001 : 2008 

ISO 14001 : 2004 


- High-speed CNC milling machines 

- CNC wire-cut machines 


- EDM machines 

- Conventional milling machines 

- Conventional turning 

- Cylindrical grinding machines 

- CNC coordinate measuring machine 

- Quick Vision measuring machine 


- Malaysia 

- Thailand 

- Philippines 

- USA 

- China 

- Taiwan 

- Israel 


Alcotec Precision Engineering Pte Ltd 

Blk 31 Defu Lane 10, #04-68 


Tel: +65 6383 6132 

Fax: +65 6383 6130 

Email: colinkua@alcotec.com.sg 

www.alcotec.com.sg 

Alcotec Precision Engineering was 

established in 1995. It is an advanced 

technology company with extensive expertise 

in product development and precision 

machining. 

Its core businesses are in the design and 

fabrication of quality replacement parts, 

engineering plastic products, test sockets, 

docking interface solutions and various 

types of test handler change kits for the 

semiconductor industry. It also performs 

high-speed precision machining of graphite 

and ceramic materials for the hard disk drive 

and medical industries. 

Operating in a 30,000 sq ft (2,787 sq m) hightechnology 

manufacturing facility, Alcotec 

is equipped with numerous cutting-edge 

technology equipment. With a staff strength 

of more than 200 employees comprising 

a critical mix of extensive expertise and 

engineering talents, the company is committed 

to providing effective one-stop solutions to 

its customers with quick delivery, high quality 

and cost-effective products and services. 

68 

69




Akribis Systems Pte Ltd 


- Design of custom stages to meet specific requirements 

- Finite element analysis (static and dynamic) of mechanical 

structures 

- Custom motor and actuator design 

- Selection and sizing of motors and force requirements 

- Aerostatic bearing stages 

- High precision large stages (T-drive, H-drive, Active Yaw 

H-Drive) 

- Motion control solutions (with high performance DSP 

controller) 

- Laser calibration and measurement of repeatability, 

accuracy, straightness etc 

- Natural frequency vibration analysis 


CE 

SEMI S22 


- CNC vertical milling machine 

- Milling machine 

- Surface grinding machine 

- Turning machine 

- Laser interferometer 

- 2D calibration glass grid 

- Vibration measurement equipment 


- Malaysia 

- China 

- Thailand 

In Latinised Greek, Akribis means ‘precision’, 

which makes it an apt name for this company 

that provides its customers with precise 

motion control systems, supported by a firm 

foundation and sound engineering expertise. 

Akribis Systems designs and manufactures 

direct drive linear and rotary motors, stages 

and precision systems that are used in 

equipment for manufacturing, inspection 

and testing. 


Akribis Systems Pte Ltd 

Block 20 AMK TechLink 

#05-25 Ang Mo Kio Industrial Park 2A 


Tel: +65 6484 3357 

Fax: +65 6484 3361 

Email: cust-service@akribis-sys.com 

www.akribis-sys.com 

The company has offices in Singapore, China, 

Malaysia, Taiwan, Japan and Thailand, and is 

supplemented by a worldwide distribution 

network in the USA and Europe. It supports 

a wide range of industries including 

semiconductor, flat panel, solar panel, hard 

disk, photonics, biomedical and electronics 

manufacturing. 

70 

71




Equiptest Technologies Pte Ltd 


- Design and engineering 

- Test contactor alignment analysis 

- Probe pin electrical performance and lifespan analysis 

- Test contactor structural FEA 

- Thermal analysis 


ISO 9001 


- CNC vertical machines (3-axis) 

- CNC drilling machines (3-axis) 


- Non-contact QA equipment (Vision) 


- Sales offices in Asia and sales representatives in Europe 

and the United States 


Equiptest Technologies Pte Ltd 

No 1 Ubi View Focus One 

#01-08 


Tel: +65 6578 9900 

Fax: +65 6578 9911 

Email: eqt@equiptest.com.sg / jasonong@equiptest.com.sg 

www.equiptest.com.sg 

Equiptest Technologies Pte Ltd (EQT) is a 

highly integrated solution provider of precision 

machines components and assemblies. The 

company serves diverse market sectors such 

as the semiconductor, medical, disk drive and 

electronics industries across Southeast Asia, 

China and the United States. 

EQT specialises in customised engineering 

solutions in mechanical engineering of 

new products, precision mechanisms and 

automated process machinery. Its product 

development and application team has 

extensive expertise in product development. 

From conceptual design, product research 

and engineering, to final release and high 

volume manufacturing, the team consistently 

delivers exacting results to its customers’ 

specifications. 

Through its network of sales agents and 

distributors, EQT boasts globalised initiatives 

and a growth strategy that constantly projects 

engineering solutions required at least two to 

three years ahead. These needs are matched 

by its technological roadmap to ensure that the 

company is always ready to provide innovative 

solutions ahead of its competitors. 

72 

73




Knight Auto Precision Engineering Pte Ltd 


- Precision machining of metal and plastic components and spare parts 

- High speed precision stamping 

- Plastic mould fabrication 


- Mazak, Mori Seiki, Fanuc CNC vertical (3- to 5-axis, up to: 2,000 x 

1,100 x 750 mm) 

- Mitutoyo CNC CMM (up to 900 x 1,600 X 600 mm) 


ISO 9001: 2000 

ISO 14001 


- Malaysia (production plant) 

- Shanghai, China (injection moulding plant) 

- Suzhou, China (machining plant) 

- Philippines (machining plant) 


Knight Auto Precision Engineering Pte Ltd 

63 Hillview Avenue 

#08-14B Lam Soon Industrial Building 


Tel: +65 6763 8101 

Fax: +65 6763 8103 

Email: tony_lee@knightap.com 

www.knightap.com 

Knight Auto is a precision engineering 

company specialising in the precision 

machining of metal and plastic components, 

namely in fabricating punches and dies, die 

sets, jigs and fixtures, tooling for stamping 

operations and inserts for mould tools. 

Its high-speed precision stamping operation 

manufactures lead frames and connectors 

for the general electronics, medical, 

telecommunication and automobile industries. 

Their mould department builds mould tools 

to support packaging, medical and general 

electronic industries as well as its moulding 

production operations. 

Knight Auto also produces sockets, docking 

systems ball mount tools and conversion 

kits for reputable test handlers in the 

semiconductor industry. Its strengths also 

include the machining of engineering plastic 

such as Torlon, Peek, Teflon, Ultem, etc. 

74 

75




Onn Wah Precision Engineering Pte Ltd 


- Precision CNC-machining and equipment assembly services 

- Specialty in high-mix, low- to mid-volume manufacturing 

(typically about 20 to 200 pieces per batch) 

- Project management from RFQs to FAs to production 

- Vendor-managed inventory schemes 

- International shipment procedures (UK, France, New Zealand, 

China, US) 


ISO 9001:2000 

AS 9100 


- Top-end CNC machines, including 4- and 5-axis milling and 

coordinates measuring machines, exclusively from Japan and 

Germany 

- Quick changeovers for high-mix low-volume production 

- 5-axis simultaneous machining for curved and/or 

complex parts 


- 100% owned subsidiary in Suzhou, China 


Onn Wah Precision Engineering Pte Ltd 

11 Changi South Lane 

Onn Wah Building 


Tel: +65 6844 3868 

Fax: +65 6844 3118 

Email: sales@onnwah.com.sg 

www.onnwah.com 

Onn Wah is a “make-to-print” organisation 

specialising in precision CNC-machining 

of complex medium-size components in a 

high-mix low-volume environment. Since 

its inception in 1961, Onn Wah has been 

servicing various sectors including the 

semiconductor, oil and gas, biomedical and 

optics industries. 

Having obtained AS 9100 certification in 

2007, the company has diversified into the 

aerospace market, which today accounts for 

30% of its activity. This swift diversification 

stems from a combination of Onn Wah’s 

operational strengths and Singapore’s 

outstanding infrastructure. 

Today, the company and its subsidiaries boast a 

300-strong workforce. Its business philosophy 

is based on continuous improvement towards 

world-class manufacturing practices. 

76 

77




Singapore Precision Engineering Quality Services 

(SPEQS) Manufacturing Pte Ltd 


- Offers a wide range of services utilising high-end CNC 

machines (auto lathe, turn/mill and machining centres) on 

ferrous, non-ferrous and plastic materials, as well as assembly 

works 

- Provides engineering support services 

- Performs customised product design, development, 

prototyping and product testing 


- CNC multi-axis auto-lathes 

- CNC machining centres 

- CNC lathes, CNC turn-mills 

- CNC horizontal machining centres 

- Electro chemical deburring machine 

- Coordinate measuring machines 


SPEQS Manufacturing Pte Ltd 

10A Joo Koon Circle 


Tel: +65 6861 6938/6861 1730 

Fax: +65 6861 6989 

Email: sales@speqs.com.sg 

www.speqs.com.sg 


ISO 9001:2000 

EN/JISQ/ 

AS 9100:2004 

Incorporated in 1990, SPEQS serves 

the needs of the healthcare, security, 

aviation, telecommunications, electronics, 

electro-mechanical and oil and gas industries 

with quality precision machining. Its range 

of CNC machines is capable of performing 

multi-axis machining for complicated parts 

to the tolerance required of each customer’s 

specifications. 

The company is further supported 

by its excellent network of heat treatment, 

chemical/surface finishing and other service 

providers, all of whom allow SPEQS to be a 

trustworthy integrated one-stop solutions 

provider. 

Resource Planning (ERP) system with fully 

integrated Product Lifecycle Management 

(PLM) features. This helps to sustain its AS9100 

quality standard while managing its business 

processes, product data and manufacturing 

operations efficiently. The integrated 

ERP/PLM system improves product traceability 

to provide timely and accurate information. 

Over the last few years, SPEQS has 

upgraded its production capabilities from 

primarily auto-lathe turning services to 

large turn-mill and machining centres 

(with stringent control standards) for the 

aviation and oil and gas industries. 

To enhance its competitive edge, the company 

implemented a web-based Enterprise 

78 

79




Swift Precision Engineering Pte Ltd 


- Precision metal machining 

- Design and build of fixtures and gauges 

- Tool and die parts making 

- CNC milling and turning 

- Jig and cylindrical grinding 

- EDM, super drill and wire cut service 


- Mori Seki turning machine x 9 units 

- Leadwell LTC-30 CNC turning machine x 1 unit 

- Mori Seki NL-2500Y turn mill machine x 2 units 

- Wei Hong BTA2000 CNC deep hole drilling machine x 1 unit 

- You Ji TV-1200ATC CNC vertical turning lathe machine x 1 unit 

- Makino twin pallet milling machine x 8 units 

- Mori Seiki milling machine x 5 units 

- Mori Seiki horizontal milling machine x 1 unit 

- OKK graphite machine x 1 unit 

- Fanuc Robodrill machine x 1 unit 

- Conventional turning/milling machine x 10 units 

- Rusia drilling machine x 1 unit 

- Charmilles wire cut machine x 2 units 

- Mitsui Seiki NC jig grinding machine x 2 units 

- Tschudin Grenchen cylindrical grinding machine x 2 units 

- Surface grinding machine x 7 units 

- ARC EDM machine x 12 units 

- Super drilling machine x 1 unit 


ISO 9001: 2008 

AS/EN/JISQ9100 

Swift Precision Engineering has come a long 

way from its humble beginnings. From just six 

employees in 1989, it has a staff strength of 

over 80 today. The company focuses on the 

machining of precision components and parts 

for the aerospace, oil and gas and general 

manufacturing industries. It also boasts design 

and build capabilities for fixtures and gauges. 

Within its stable are a cluster of sophisticated 

machines, such as the Charmilles wirecut 

machine with an accuracy of up to two microns 

and jig grinding machines. 


Swift Precision Engineering Pte Ltd 

51 Bukit Batok Crescent 

#03-18, Unity Centre 


Tel: +65 6316 2068 

Fax: +65 6316 2078 

Email: enquiry@swiftprecision.com.sg 

www.swiftprecision.com.sg 

Branch: 

No. 1 Loyang Walk 

Loyang Industrial Estate 


Despite its success, Swift constantly looks to 

improve and upgrade its skills and services. 

The company boasts both ISO 9001: 2008 

and AS/EN/JISQ 9100 certification and has 

been named Best Tool Vendor by TOS for two 

consecutive years, all of which are a testament 

to Swift’s commitment to offering quality and 

efficiency to its customers. 

80 

81




Super Union Precision Engineering Pte Ltd 


- Precision machining (all types of materials) 

- Assembly 

- Clean room assembly (Class 1,000) 

- Engineering 


- CNC mill: 23 CNC machines comprising of 3-, 4- and 5-axis 

(work-piece size of up to 1,940mm x 1,200mm) 

- CNC turn: 2 vertical and 4 horizontal 

(work-piece size of up to 900mm x 700mm) 

- CNC turn-mill: 2 units of high performance machine 

(work-piece size of up to 420mm in diameter and 1,260mm in 

length) 

- CNC auto-lathe: 3 heavy duty and high speed machine 

(work-piece size of up to 20mm in diameter and 600mm 

in length) 

- EDM/Wirecut: 4 EDM and 5 Wirecut for the fabrication of 

hardened metal or carbide parts (accuracies of up to 2 μm) 

- Grinding: 15 high precision grinding machines including 1 unit 

of Wasino profile grinder for ultra high precision parts. 


AS 9100 Rev. B 

ISO 9001: 2000 

Established in 1991, Super Union Precision 

Engineering is a leading precision machining 

company with facilities in assembly and 

engineering services. The company boasts 

128 highly skilled employees and a wide 

range of cutting-edge machinery. Product 

conformity, reliability and well-documented 

procedures are key aspects of the company’s 

AS9100 accreditation and ISO 9001:2000 

certification. 

In meeting its customers’ expectations 

and challenges, the company practices 

stringent quality control while adopting the 

most cost-effective operation processes. 

Additionally, its lean hierarchy allows flexibility 

in its operations and quick turnaround when 

important decisions need to be made. With 

its capabilities and well-established facilities, 

the company serves an extensive range of 

industries including oil and gas, aviation, 

marine, medical and semiconductors, each 

appropriately supported by its trained and 

experienced workforce. 


- Ayutthaya, Thailand 


Super Union Precision Engineering Pte Ltd 

10 Kaki Bukit Avenue 1, #02-02 

Kaki Bukit Industrial Estate 


Tel: +65 6841 3113 

Fax:+65 6841 2118 

Email: sales@superunion.com.sg 

www.superunion.com.sg 

82 

83




Taimaru Engineering Pte Ltd 


- Specialists in the fields of precision machinery, general repair works 

and servicing of machinery parts 


ISO 9001: 2000 


- Vertical 5-axis CNC turn/mill 

(Mazak Integrex E-1550V/10 2) x 1 unit 

- 5-axis machine centre (DMU 200P TNC 430) x 1 unit 

- CNC 5-axis deep hole drilling machine (IA3TLF) x 1 unit 

- Gun drill machine (TL1001) x 1 unit 

- CNC lathe (Power Master-N (3000U)) x 2 units 

(QT30N) x 2 units (M5N) x 2 units 

- Vertical machine centre (various models & sizes) x 4 units 

- Manual lathe (various models & sizes) x 12 units 

- Manual mill (various models & sizes) x 9 units 

Major Measuring Equipment 

Faro platinum arm: 

- No. of axis : 6 

- Reach : 8 feet (max) 

- Accuracy : 0.025mm 

Mic-Trac: 

- Model : MT3000 

- Setting length : 36” max 

- Accuracy : 0.0003” 

Contact Information: 

Taimaru Engineering Pte Ltd 

73 Joo Koon Circle 


Tel: +65 6862 5800 

Fax: +65 6862 5811 

Email: mails@taimaru.com.sg 

www.taimaru.com.sg 

At its 3,662 sq m (39,417 sq ft) fully integrated 

plant in Singapore, Taimaru houses over 45 

units of specialised machines. These include 

CNC milling, CNC turning, 5-axis (turn/mill) 

machines and gun drill machines. These 

machines support precision machinery, 

general repair works and the servicing of 

machinery parts. A list of qualified vendors 

provides support on secondary processes 

such as coating, cladding and material 

treatments. 

Taimaru has a dedicated team of engineers 

and technicians, all of whom are impeccably 

trained in the work of fabrication and 

modifications of a wide range of mechanical 

components 

Established in 1975, the company is ISO 

9001:2000-certified and boasts a staff 

strength of 49, many of whom have worked 

with the company for at least eight years. 

Over the years, the company has identified 

the constant need for adopting new skills 

in order to rise to any challenge that the 

industry might present. As such, much focus 

is placed on the developing and upgrading 

of its employees’ skills and knowledge, 

on top of the constant improvement of its 

machineries’ capabilities. 

84 

85




Tara Technologies Pte Ltd 

For over 50 years, Tara Technologies 

has designed, tested and manufactured 

components and systems used in critical 

applications for the world’s leading 

manufacturers in the semiconductor, 

aerospace, military, energy and medical 

markets. 

Its best-in-class engineering teams 

bring component and system know-how, 

embedded with a culture of continuous 

improvement, to solve application problems 

and support its customers’ schedules from 

prototype to production. 

its customers need from new program startups 

through dependably repeatable, highvolume 

production. 

Established in 1954 as the first manufacturer 

of welded bellows in the United States, the 

company has won numerous awards for its 

unstinting quality and boasts accolades such 

as being the first company in the world to 

introduce robotic welding of metal bellows. 

The unveiling of Tara’s state-of-the-art 

production facility in Singapore in 2007 

marked the company’s expansion into Asia. 

Tara’s proven track record for performance, 

reliability and quality provides the confidence 


- FA and metallurgical analysis 

- Programmable CMM inspection 

- Program management – DDR, PDR, CDR 

- Six Sigma approach – DOE, PFMEA, FMEA, mapping 

- Complete life cycle capabilities – R&D/rapid prototype/qualification 

testing/on-time manufacturing 

- Advanced welding – e-beam, laser, TIG, plasma orbital 

- Surface textures and advance hardness coatings – CVD/PVD/ 

e-beam/thermal spray/passivation/chemical cleaning 

- Precision machining/internal machining facility – prototype, 

in-process and volume capabilities; turning up to 21”, milling up to 

20” x 20” 

- Heat treatment – vacuum and atmospheric 

- Complex electromechanical assembly, test and integration – tier 1 

capabilities, class 100, class 1000 and class 10,000 clean rooms 

- Logistics and supply chain management – complex BOM’s/critical 

part management 


ISO 9001 

ISO 9100 


- Florida, USA 

- California, USA 


Tara Technologies Pte Ltd 

Blk 203 Woodlands Avenue 9 



Tel: +65 6759 2335 

Fax: +65 6759 7319 

Email: infor@taratechnologies.com 

www.taratechnologies.com 

86 

87

SECONDARY 

PROCESSES AND 

SUPPORTING 

INDUSTRIES



ACP Metal Finishing Pte Ltd 

Key Capabilities: 

- Normal and hard anodising 

- Chromic acid anodising 

- Chromate conversion 

- Passivation 

- Plasma stripping 

- Electroless nickel plating 

- Chrome, nickel, cadmium, silver and tin plating 

- Brush plating 

- Grinding 

- Machining 

- Grit blasting 

- Stress relief 


ISO 9001 : 2000 

AS 9100 : 2004 

ISO 14001 : 2004 


- Auto anodising line 

- Semi-auto anodising line 

- Manual anodising lines 

- Plating lines 

- Cylindrical grinding machines 

SAR 145 

FAR 145 

For more than 25 years, ACP has built a 

first class reputation as a metal surface 

finisher, supporting the aerospace, biomedical, 

consumer electronics, optical, 

ordnance and semi conductor sectors in 

Singapore. ACP’s principal activities centre 

on specialised surface treatment and finishes 

that serve the function of corrosion, scratch 

and wear resistance, electrical insulation, 

cleanliness and aesthetic enhancement. With 

the opening of ACP Aerospace in December 

2006 to serve the MRO market, grinding, 

machining, grit blasting and stress relief 

services are offered. Today ACP operates 

with 170 trained personnel in Joo Koon 

Circle, Singapore. 


ACP Metal Finishing Pte Ltd 

No.6 Joo Koon Circle 


Tel: +65 6863 8318 

Fax: +65 6862 2989 

Email: sales@acpanode.com.sg 

www.acpanode.com.sg 

www.acpaerospace.com.sg 

NADCAP 

90 

91



Aldon Technologies Group 


- Chemical cleaning for wafer fabrication and LCD (flat panel) 

fabrication 

- Anodising services for wafer and flat panel, repair/overhaul industries 

- Grit blast for wafer and flat panel, repair/overhaul industries 

- Arc spray for wafer and flat panel, repair/ overhaul industries 

- Plasma coating services for wafer and flat panel, repair / overhaul 

industries 

- Manufacture and supply of process kits, consumables and spares 

for wafer fabs and flat panel industries 

- Repair and refurbishment of auxiliary equipment / process kits for 

wafer fabrication and flat panel fabrication 


ISO 9000 


- Plasma coating chamber 

- Arc spray chamber 

- Anodising and cleaning lines 

- Auto blaster 

- Support equipment 


- China 

- Malaysia 

- Korea 

- Japan 

- Taiwan 

- USA 


Aldon Technologies Group 

20 Loyang Lane 


Tel: +65 6848 6996 

Fax: +65 6844 7277 

Email: services@aldon.com.sg 

www.aldongroup.com.sg 

Established in 1999 to provide specialised 

products and services in the semiconductor 

industry, Aldon Technologies Group has 

grown to become the leading integrated 

product and service provider for the regional 

electronics manufacturing industry. With 

associate sales offices in China and Malaysia 

and business collaborations in Korea, Japan, 

Taiwan and the US, the company has been 

able to extend its global network to support 

its international customers. 

Aldon Technologies Services offers a wide 

range of products and services to cater 

to the needs of its customers in the wafer 

fabrication and electronics manufacturing 

industries. Its 50,000-sq-ft (4,645-sq-m) 

factory facility was commissioned in 2006 to 

provide high quality advance surface coating 

and finishing services to the electronics and 

liquid crystal display (LCD) manufacturing and 

semiconductor wafer fabrication industries. 

The Group constantly strives to exceed its 

customers’ needs and expectations through 

excellent quality and service, innovation, 

know-how and full adaptability. It always aims 

to bring value-added technology and develop 

integrated products and service solutions 

to help improve its customers’ processes. 

92 

93



Aluputer Industrial Pte Ltd 


- Chromating 

- Chemical cleaning 

- Hard anodising 

- Selective nickel plating 

- Electroless nickel (high corrosion resistant) 

- Prism assembly line 

- Optics fabrication 

- Optical coating 

- Powder coating 

- Spray painting 

- Silk-screen 

- Tempo printing 

- Blueing 

- Phosphating 

- Sand casting 

- CNC machining 

- Heat treatment - Annealing 


ISO 9001: 2000 

ISO 14001: 2004 

Aluputer Industrial is a specialist in the 

surface treatment industry. Established 

in 1983, it caters to the needs and high 

specifications of its clients, ensuring perfect 

product delivery on schedule at minimal cost. 

The entire company gears itself towards 

its main objective of customer satisfaction. 

Aluputer attributes its success in the surface 

treatment industry to the traditional belief 

in the power of satisfied customers. The 

company counts computer peripheral, audio 

and video manufacturers of international 

renown among its clients, all of whom are 

confident of the quality and reliability of 

Aluputer’s strength and service. 

In 1993, the company extended its operations 

to Johor Bahru, Malaysia and today boasts a 

skilled workforce of about 350. 

With its wealth of integrated expertise and 

the latest machinery, Aluputer is well geared 

to meet the specific needs of its customers 

for years to come. 


- Fisherscope MMS betascope 

- Perkin Elmer spectro-photometer 

- Zygro inferometer 

- Minolta colorimeter 

- Agilent gas chromatography 

- Coordinate measurement machine (CMM) 


- Malaysia (Johor) 


Aluputer Industrial Pte Ltd 

13 Senoko Ave 


Tel: +65 6755 6622 

Fax: +65 6755 9911 

Email: erik@aluputer-ind.com.sg 

www.aluputer-ind.com.sg 

94 

95



Applied Total Control Treatment Pte Ltd (ATC) 


One-stop solutions, specialising in metal finishing 

services: 

- Electroplating, plating, conversion coatings e.g. aluminium 

anodising, aluminium conversion coating, zinc plating, 

nickel plating, electroless nickel, silver plating, gold plating, 

stainless steel passivation and electropolishing 

- Coating services such as powder coating and spray painting 

- Special cleaning processes 


- Plant area: 35,000 sq ft (3,251 sq m) metal finishing facility and 

10,000 sq ft (930 sq m) coating facility 

- Class 1000 cleanroom for special cleaning processes 

- Well equipped laboratory and testing facilities 

- Fully automated plating line 

- De-ionised water system 

- X-ray machine 

- Spectrophotometer 

- Sigmascope 


ISO 9001: 2000 

AS 9100 (Rev B) 

NADCAP 


Applied Total Control Treatment Pte Ltd (ATC) 

6 Marsiling Lane (Block B) 


Tel: +65 6362 1200 

Fax: +65 6362 1768 

Email: atc@atc-treatment.com 

www.atc-treatment.com 

From a humble start-up in 2004, ATC has 

transformed to become a leading player in 

the metal finishing industry. The company 

complies to the stringent Aerospace Quality 

Standards and has achieved AS 9100 and 

Nadcap certification for the aerospace 

industry. 

In order to maintain its strong capabilities and 

technical expertise, the company emphasises 

continuous improvement within its team. 

ATC ensures internal growth by continuous 

skills training that helps its team to be wellequipped 

and readily take on new challenges 

to meet the stringent quality expectations 

in metal finishing. 

ATC also attributes its success to its ability 

to adapt and work closely with customers 

to fulfil their increasing sophisticated needs 

and special requirements for secondary 

processes. It is through consistency of quality, 

timely delivery, and service reliability that 

ATC forges strategic partnerships with its 

growing clientele and achieves total customer 

satisfaction. 

96 

97



CEL Coatings Industries Pte Ltd 


- Yellow, blue and black zinc on steel 

- Passivation on steel 

- Electroless nickel on cold rolled steel, aluminium, 

zinc die-cast and magnesium PTFE-electroless nickel 

composite coating for steel 

- Black electroless nickel on steel 

- Satin tin cobalt on magnesium and steel 

- Clear and yellow chromating on aluminium 

- Gold on kovar steel and aluminium 

- Copper on steel 

- PTFE coatings on steel 

- Copper, nickel, chrome on ABS 

- Anti-friction coating 

- Insulation coating 


ISO 9001: 2000 

ISO 14001: 2004 

OHSAS 

18001: 2007 


- China (Suzhou) 


CEL Coatings Industries Pte Ltd 

16 Benoi Place 


Tel: +65 6861 7155 

Fax: +65 6862 3386 

Email: pauline@celcoatings.com 

www.celcoatings.com 

CEL Coatings has been specialising in surface 

treatments since 1984. With its team of 

dedicated managers, engineers and workers, 

the company has grown to encompass over 

200 employees and manufacturing facilities 

occupying more than 40,000 sq m (430,556 

sq ft) today. Its production lines are a mix 

of semi- to fully automatic lines and cater 

for both high and low volume production 

requirements. 

In 1995, in recognition of the emergence 

of a world-class cluster of industries 

and support services in Singapore, CEL 

Coatings upgraded its services from basic 

electroplating activities to high-quality and 

complex surface finishing services. The 

company has also successfully re-engineered 

its production capacity to deliver huge 

volumes of products with consistent and 

superior quality. 

With state-of-the-art facilities and best-inindustry 

operating processes, CEL Coatings 

has evolved to become a sought-after 

specialist in surface treatment services. Its 

consistently high quality, fast turnaround 

and competitive pricing make for a winning 

formula that has helped the company become 

a leader in the high precision metal finishing 

industry. 

98 

99



Feinmetall Singapore Pte Ltd 


- Designs, manufactures and repairs wafer probe cards 

- In-house capability to design and manufacture cantilever 

probe cards 


ISO 9001: 2000 


- Probe card analyser (Precision Point VX3) 

- Z-scope (Mitutoyo) 

- Semi-auto aligner (Wentworth) 

- Microscopes (Meiji) 

- CNC milling (Servoimpact) 


- Germany 

- Taiwan 

- USA 


Feinmetall Singapore Pte Ltd 

8 Boon Lay Way 

#11-16 Tradehub 21 


Tel: +65 6316 4544 

Fax: +65 6515 5173 

Email : sam@sg.feinmetall.com 

www.feinmetall.de 

Established in 1964, Feinmetall is a modern 

medium-scale company with deep-rooted 

traditional values. Based in Herrenberg, 

Germany, Feinmetall has an additional 

production unit in Nové Mesto nad Metují 

in the Czech Republic and sales and service 

centres in Singapore, ShinChu (Taiwan) and 

San Jose (USA). The company has 310 

employees and is represented in more than 

30 countries all over the world. 

Feinmetall is one of the largest manufacturers 

of electronic components in the test room 

and one of the leading suppliers in the test 

equipment market. Its product portfolios 

range from probe cards for wafer test to 

interfaces for test systems, fixtures for 

ICT and functional tests to an extensive 

programme of spring contact probes. 

Realising efficient and effective products 

according to its customer specifications and 

technological enhancements underlines the 

company’s core competencies. This in turn 

lays the foundation for further innovations 

and perpetual growth. 

100 

101



Frontken (Singapore) Pte Ltd 


- Thermal spray coating 

- Cold build up coating 

- Conversion coating 

- Specialised welding 

- Precision cleaning 

- Abrasive blasting 

- Machining and grinding 

- Precision manufacturing 

- Mechanical fitting and assembly 

- Dynamic balancing 

- Heat treatment 

- In-situ machining 

- Metal stitching 

- Laser alignment 


- HVOF and plasma spray system complete with 6-axis 

robotic system 

- Semi-automated twin wire arc spray system and 

flame spray systems 

- Conventional and CNC lathe machine 

- 3-, 4- and 5-Axis CNC milling machine 

- Cylindrical grinding machine up to 8 tons 

- Semi-automated plasma transfer arc welding 

machine 

- Dynamic balancing machine up to 22 tons 


ISO 9001 : 2008 

ISO 9001 : 2000 

AS 9100 : 2004 

ISO 14001 : 2004 

NADCAP 

Frontken is the industry leader of 

surface metamorphosis solutions and its 

complementary technologies in Southeast 

Asia. The company possesses the unique 

combination of surface and mechanical 

engineering capabilities for servicing 

and manufacturing of equipment and 

its components (rotating and stationary 

components of turbo-machineries or other 

mechanical systems) from start to finish. 

Founded in 1996, Frontken is an established 

presence in the region today with a combined 

workforce of some 1,000 employees and 

14 quality-certified engineering plants. 

With footprints in Malaysia, Thailand, the 

Philippines, Taiwan, China and Indonesia, 

the company is well positioned to serve the 

Asia Pacific region and beyond. 

As testament to its commitment to 

excellence, Frontken’s precision 

manufacturing division, Chinyee Engineering 

& Machinery Pte Ltd, clinched the Singapore 

Aerospace Supplier Excellence award 

presented by the AAIS in 2009. 


- China 

- Malaysia 

- Indonesia 

- Philippines 

- Taiwan 

- Thailand 

Contact Information: 

Frontken (Singapore) Pte Ltd 

Jurong Plant 1 

156A Gul Circle 


Tel: +65 6863 4500 

Fax: +65 6863 4766 

Email: info@frontken.com 

www.frontken.com 

102 

103



Hitech Heat Treatment Services Pte Ltd 


Vacuum heat treatment 

- Hardening and tempering 

- Solution treatment/homogenising 

- Precipitation hardening/ageing 

- Magnetic annealing/hydrogen cleaning 

- Stress relieving/degassing 

- Normalising/ annealing 

- Baking/sintering/stabilisation 

- Brazing/ braze and harden 

- Carburising/recrystallisation 

- Customised heat treatment 


ISO 9001:2008 

EN/JISQ/ 

AS 9100:2004 

-AS 9104A 

NADCAP 

AS 7003 

Established in 1986, Hitech specialises in 

providing heat treatment services of metals 

and alloys for the manufacturing industries. 

These include the automotive, marine, 

aviation, precision machining, mould making, 

oil and gas and medical sectors. It is a onestop 

heat treatment solutions provider that 

offers value-added services which include 

failure analysis, interpretation of reports 

to customers, blueprinting solutions to 

problems, heat treatment consultancy, laser 

welding repair services, sourcing of special 

materials and consumables/equipment, plus 

training and cost improvement consultancy 

for toolings. 

At Hitech, quality is built, not inspected. Such 

is its continual quest for excellence in its 

field of work. The company has established 

and consistently maintained an effective and 

dynamic quality system, which ensures that 

it is relevant and meets the requirements 

of every customer. Its decades’ worth of 

experience has also endowed the company 

with a keen sense of key standards required 

for the various industries. 

Hitech was the first company to receive 

NADCAP accreditation in the Asia Pacific 

region from PRI, Inc. USA. 

Surface Treatment: 

- Plasma nitriding/nitrocarburising (Plasnit) 

- Plasma nitriding and oxidation (Plasox) 

- Plasma-assisted CVD coating 

- Plasma carburising of stainless steels 

- Gas nitriding/nitrocarburising and oxidation 

Protective atmosphere heat treatment: 

- Hardening and tempering 

- Carburising/carbonitriding 

- Stress relieving/normalising/annealing/homogenising 

- Austempering/marquenching 

- Solution treatment and ageing 

Other Services: 

- Cryogenic (subzero) treatment 

- Shrink-fitting 

- Induction hardening/soldering 

- Automated degreasing 

- Induction hardening/soldering 

- Automated degreasing 

- Laser welding (mould repair/electronic parts weldings, etc.) 

- Sales of specialty materials/heat treatment equipment 

and supplies 

- Heat treatment consultancy/failure analysis/metallurgical 

laboratory services 


− Vacuum furnaces 

− Nitriding furnaces 

− Protective atmospheric furnaces 

− Conveyor-belt furnaces 

− Shaker furnace 

− Tempering furnaces 

− Roll automated washing machine 

− Laser welding machines 

− Metallurgical laboratory 


Hitech Heat Treatment Services Pte Ltd 

57 Joo Koon Circle 


Tel: +65 6863 2530 

Fax: +65 6863 2534 

www.hitech.sg 

104 

105



Opto Precision Pte Ltd 


- Optical design 

- Optical coating 

- Optical system assembly 

- Optics component manufacturing 

- Optics coating 

- Consultancy 

- Sales of specialty materials 

- Linos products SEA distributor 


ISO 9001: 2008 


- Leybold coating machines 

- 2 spectrophotometer (Perkin Elmer) 

- Ultrasonic line 

- Zygo interferometer 

- Trioptics 

- Disco dicing system 


- USA 

- Europe 

- China 

- Middle East 

- Southeast Asia 

Strategically located in Singapore, Opto 

Precision offers one of the best optics 

assembly, optics component manufacturing 

and coating facilities. The company offers a 

well established system for IP-protection to 

provide excellent products, faster turnaround 

time and competitive pricing to its customers 

worldwide. 


Opto Precision Pte Ltd 

11 Toh Guan Road East #02-01 


Tel: +65 6565 1110 

Fax: +65 6565 0013 

Email: keigo.tang@opto.com.sg 

www.opto.com.sg 

Its precision optics department facilities 

include several state-of-the-art Germanmade 

machines with the ability to create 

extremely precise optics that are customised 

to its customers’ specifications. Opto 

Precision’s customer base includes markets 

for industrial, biomedical, optoelectronics, 

semiconductor, military, telecommunication 

and the institutional fields. 

106 

107



Singapore Epson Industrial Pte Ltd 


- Plating services and surface treatment with a focus on 

customisation 

- Fully equipped laboratory, experienced R&D and plating teams 

- Flexible approach to meet logistic requirements through shiftto-stock 

services 

- Engineering services 

- Analysis on RoHS 

- Elemental depth layer analysis 

- Identification of organic contamination 

- Morphology and quantitative elemental analysis of organic/ 

inorganic contamination 

- Other customised services 

- Plating services: gold, silver, palladium, palladium-nickel, 

electroless-nickel, electrolytic nickel, tin, copper, PVD & DLC 

- Surface treatment: mechanical/chemical/electrolytic polishing, 

etching, passivation, quenching and annealing 


ISO 9001 

ISO 14001 

TS 16949 

AS 9100 


- GD profiler 

- Autolab 

- Scanning electron microscope 

- Electron dispersion x-ray 

- Universal micro material tester 

- Scanning electrochemical microscopy 

- Roughness tester and others 

Singapore Epson Industrial Pte Ltd (SEP) is the 

Southeast Asian manufacturing base of Seiko 

Epson Corporation. It boasts two specialised 

divisions, namely Plating and EMC. 

SEP Plating Division was established in 

1979 to provide surface finishing services. 

Using the most advanced technology, a fully 

equipped laboratory for monitoring and a 

team of highly trained personnel, the plating 

division delivers quality products that never 

fail to satisfy expectations. It offers a flexible 

approach to meeting logistics requirements 

through shift-to-stock services, overseas 

shipments and a one-stop service. 

Testing Facilities: 

- 10-m semi-anechoic chamber 

- Full anechoic chamber 

- Shield rooms 


Singapore Epson Industrial Pte Ltd (Plating Division) 

86/88 Second Lok Yang Road 


Tel: +65 6268 2164 

Fax: +65 6265 3566 

Email: patrick.yeoh@sep.epson.com.sg 

www.epson-plating.com.sg 

Singapore Epson Industrial Pte Ltd (EMC Division) 

1 Tuas Link 4 


Tel: +65 6865 8355 

Fax: +65 6897 7984 

Email: lengguan.tan@sep.epson.com.sg 

EMC Division was established in June 

2009 to provide quality electromagnetic 

compatibility tests. The company has since 

expanded its business to include worldwide 

customers with a focus on Southeast Asia. 

108 

109



Singapore Technologies Kinetics 

(Kinetics Integrated Engineering) 

Singapore Technologies Kinetics (Kinetics 

Integrated Engineering) is the land 

systems and specialty vehicles arm of 

Singapore Technologies Engineering Ltd 

(ST Engineering). As one of Asia’s leading 

defence and specialty vehicles company, 

ST Kinetics has a strong portfolio of 

products and services for the defence, 

homeland security and commercial markets. 

Their capabilities include the design 

and development, systems integration, 

production, operations, support and 

through life management of a wide range 

of specialised land systems equipment and 

specialty vehicles. 

Kinetics Integrated Manufacturing (KIM) is 

the platform and weapons manufacturing 

hub of ST Kinetics. In recent years, Kinetics 

Integrated Engineering (KIE) was formed 

to tap on KIM’s comprehensive range 

of manufacturing facilities to serve the 

commercial market. Currently, KIE provides 

customised solutions, products and services 

in the area of rapid deployment, specialty 

vehicles, contract manufacturing and 

engineering design for the defence and 

commercial markets 

ST Kinetics is made up of three business 

groups, namely Land Systems & Solutions, 

Specialty Vehicles & Services and Total 

Support & Services groups. 


- Welding: GMAW, GTAW and SMAW 

- Heat treatment: annealing, normalising, stress relief, 

hardening, gas nitriding, carbonitriding, solution 

treatment, sub-zero treatment 

- Chemical finishing: Chemical analyses and testing, zinc and 

manganese phosphating, hard chroming, black oxidising, 

selectron plating 

- Surface treatment/plating: blasting, painting and coating 

- Precision machining: horizontal machining and boring, 

turn-mill, deep-hole boring, deep-hole milling 

- Fabrication: water jet and CO2 laser plate cutting 


- Carburising furnace 

- Vacuum furnace 

- Pit furnace 

- Nitriding pit furnace 

- Carbottom furnace 

- Aluminium and other supporting furnace 


Singapore Technologies Kinetics 

(Kinetics Integrated Engineering) 

16 Tuas Avenue 7 


Tel: +65 6470 8015 

Fax: +65 6470 0622 

Email: lohderrick@stengg.com 

www.stengg.com 


ISO 9000 

ISO 14000 

AS 9104A 

API certified 

NADCAP 

by mid-2010 

110 

111



Speedy Industrial Supplies Pte Ltd 


- Wire harness and cable assemblies 

- Higher sub-assemblies and routings 

- Printed circuit-board assemblies 

- Box build 

- Sheet metal products and services 

- Precision engineering services 


- SMT lines 

- Wave soldering lines 

- PVA conformal coating machine 

- Aqueoustech batch cleaning machine 

- Teradyne in-circuit tester 

- Brady Wraptor labelling machine 

- Wire processing equipment 

− Cirris testers 

− Portable XRF analyser 

− Class 10K cleanbooth 


ISO 9001 

ISO 14001 

UL 

Established in 1987, Speedy is a leading 

manufacturer of wire harnessing, cable 

assemblies, moulded cables and electromechanical 

assemblies. It also manufactures 

printed circuit board assemblies and box 

builds, and handles contract manufacturing 

projects. 

Speedy is a total solutions provider, able to 

provide a flexible range of services to meet 

the demands of customers from diverse 

business sectors. Customers who require 

quick turnaround on multiple products have 

the option of Speedy’s high-mix low-volume 

service. The company’s sales, purchasing, 

and manufacturing teams work closely to 

ensure that customers get products that 

meet their specifications. 

Speedy’s commitment to fast turnaround 

times and quality products has earned 

it contracts with leading names in the 

electronics, information technology, life 

sciences and precision equipment industries. 


- Malaysia 

- China 


Speedy Industrial Supplies Pte Ltd 

171 Kallang Way #03-01 


Tel: +65 6743 4116 

Fax: +65 6743 3351 

Email : yhtan@speedy-ind.com 

www.speedy-ind.com 

112 

113



Wangi Industrial Co. Pte Ltd 


- Optical design and prototyping 

- Diamond turning 

- Optical mould insert and mould fabrication 

- Polymer optics moulding 

- Precision glass optics machining 

- Technical glass and display screen glass 

- Optical thin-film coating 

- Optical system assembly 


ISO 9001:2000 


- China 

- US 

- Europe 

- Japan 

- Korea 


Wangi Industrial Co. Pte Ltd 

29 Ubi Road 4 


Tel: +65 6743 2233 

Fax: +65 6743 0195 

Email: sales@wangi-industrial.com 

www.wangi-industrial.com 

An independent family business in Singapore 

since 1968, Wangi boasts manufacturing 

facilities in Singapore and China. The 

company is a value provider of high quality 

surface finishing, technical glass, precision 

optics and optical thin-film coating solutions. 

Through operational excellence, technology 

and innovation, Wangi seeks to create the 

best winning solutions for its clients, who are 

in the computer peripherals, consumer digital, 

imaging, flat panel display, point-of sales, 

ATM, automotive, analytical instruments and 

optoelectronics sectors. 

The company focuses on technology, 

eliminating waste and standardising 

operations — all of which translates to offering 

its customers better, more innovative, more 

cost-effective and faster solutions. 

114 

115

NOTES

Complex Equipment Supplier Guide - Spring

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?