08 71 00 Door Hardware.pdf - Milestone Construction Services, Inc

Project Specifications: Transit Maintenance and Operations Facility
B. The opening force required to operate a door must be in compliance with the
current ADA guidelines for the interior and exterior openings.
C. Use the regular arm, parallel arm or top jamb mounted position to locate the
closer for the maximum degree of efficiency and to place the closer out of
sight wherever possible. Closers will be located on the interior side of the
opening where possible.
D. Closers will have a written 25-year warranty issued by the manufacturer.
E. Models and Functions
LCN
DORMA
4040XP 8900
4040-18 8980
EDA
SPA
CUSH-S
S-DS
CUSH-H
S-DST
2.09 ELECTRONIC HARDWARE AND EQUIPMENT
A. All electronically controlled or operated hardware will be by one
manufacturer. Every component will have been tested and certified by UL and
will bear a label showing its approval, rating and parameters. All power
supplies will be listed as UL Class 2 access control, fire, burglary, releasing
devices. Electronically operated units to be applied to fire rated openings
cannot be modified in the field or shop after the manufacturer has applied
label.
B. Power Supplies:
VonDUPRIN DORMA SDC
873 x 871-2 502RF 602RF
JB7T 501JP-20TS 601JP-20TS
MS764 MC4 MC-4
EPT ES105 PT-5
R2(24Vdc coil/120V ac-12 amp contacts) RLY24
24-RY
2.10 DOOR TRIM AND ACCESSORIES
A. All kickplates will be 8 inches high and 1-1/2 inches less than the door width,
with all exposed edges beveled. Mop plates will be 4 inches high and 1 inch
less than the door width, with all exposed edges beveled. Armor plates and
edge guards will be 34 inches high. All kickplates, mop plates, edge guards
and armor plates will be stainless steel, .051 inch or thicker.
DOOR HARDWARE
PW/WBG/413749
08 71 00 - 8 JULY 30, 2012
©COPYRIGHT 2012 CH2M HILL