Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>Milling</strong> <strong>machines</strong><br />
Basic 540, positioning range 510 x 308 x 70 mm:<br />
Main characteristics:<br />
* very rigid and fast<br />
* available as kit or assembled<br />
* good cost/performance ratio<br />
* even for larger workpieces<br />
* for model building, insulation milling, engraving, PCB drilling and in<br />
education/training<br />
Basic Package<br />
Beginner's<br />
Package *<br />
Power Package **<br />
Xpert Start 90XSTB0540GP 90XSTB0540EP 90XSTB0540PP<br />
kit incl. SF-C3 motor control unit, milling software XpertMILL V2 LT<br />
€ 3.216,00 € 3.408,00 € 5.334,00<br />
excl. VAT: € 2.680,00 excl. VAT: € 2.840,00 excl. VAT: € 4.445,00<br />
Xpert Advance 90XADB0540GP 90XADB0540EP 90XADB0540PP<br />
kit incl. XpertCNC motor control unit and milling software XpertMILL V2 Hobby, tool and<br />
reference switsches € 4.368,00 € 4.584,00 € 6.120,00<br />
* Beginner's Package: respective basic package + KRESS 800 FME and set of bits<br />
excl. VAT: € 3.640,00 excl. VAT: € 3.820,00 excl. VAT: € 5.100,00<br />
** Power Package: respective basic package + tool and reference switches, high frequency spindle system, set of bits<br />
Basic 1000, positioning range 1042 x 420 x 70 mm:<br />
Main characteristics:<br />
* larger working range<br />
* advantageous entry model<br />
* good protection against dirt and dust<br />
* reference switches for all axes<br />
* principally for 2D use<br />
* for small series production<br />
Basic Package<br />
Xpert Start<br />
90XSTB1000GP<br />
assembled incl. SF-C3 motor control unit, milling software XpertMILL V2 LT, tool and<br />
reference switches<br />
€ 3.984,00<br />
excl. VAT: € 3.320,00<br />
Xpert Advance<br />
90XADB1000GP<br />
assembled incl. XpertCNC motor control unit and milling software XpertMILL V2 Hobby,<br />
tool and reference switches<br />
€ 5.022,00<br />
excl. VAT: € 4.185,00<br />
STEP-FOUR GmbH 〡 Bayernstraße 77 〡 5071 Wals-Siezenheim | AUSTRIA<br />
pricelist 2012<br />
Phone +43 (0) 662 / 45 93 78-0 〡 Fax +43 (0) 662 / 45 93 78-20 〡 office@step-<strong>four</strong>.at 〡 www.step-<strong>four</strong>.at Seite |1
<strong>Milling</strong> <strong>machines</strong><br />
The Precise line convinces the users with its rigid construction and stronger motors. In addition the Y/Z-drive is also covered<br />
and thus protected against dirt. This guarantees highest precision and reliability for daily use. Reference switches and a tool<br />
change sensor for length measurement of tools are included as standard.<br />
Precise 760, positioning range 750 x 453 x 100 mm<br />
Precise 1000, positioning range 1015 x 598 x 100 mm<br />
Precise 1000U, positioning range 1015 x 600 x160 mm<br />
Main characteristics:<br />
*<br />
tool change and reference switches included<br />
*<br />
stepper motor drive via trapezoid thread spindles (Ø 12 mm, 3 mm pitch)<br />
* bush bearing guidings on hardened and polished steel shafts (X/Y = Ø 20 mm, Z = Ø 16 mm)<br />
Precise 760 Precise 1000 Precise 1000 U<br />
(with supported guidings)<br />
Xpert Start 90XSTP0760GP 90XSTP1000GP 90XSTP1000UG<br />
assembled incl. SF-C3 motor control unit, milling software XpertMILL V2 hobby,<br />
Xpert[DRAW] V2, Xpert[CAM] V2, tool and reference switches<br />
€ 6.816,00 € 7.332,00 € 9.228,00<br />
excl. VAT: € 5.680,00 excl. VAT: € 6.110,00 excl. VAT: € 7.690,00<br />
Xpert Advance 90XADP0760GP 90XADP1000GP 90XADP1000UG<br />
assembled incl. XpertCNC motor control unit and milling software XpertMILL V2 hobby,<br />
Xpert[DRAW] V2, Xpert[CAM] V2, tool and reference switches, emergency stop switch € 7.426,80 € 7.906,80 € 9.763,20<br />
excl. VAT: € 6.189,00 excl. VAT: € 6.589,00 excl. VAT: € 8.136,00<br />
STEP-FOUR GmbH 〡 Bayernstraße 77 〡 5071 Wals-Siezenheim | AUSTRIA<br />
pricelist 2012<br />
Phone +43 (0) 662 / 45 93 78-0 〡 Fax +43 (0) 662 / 45 93 78-20 〡 office@step-<strong>four</strong>.at 〡 www.step-<strong>four</strong>.at Seite |2
<strong>Milling</strong> <strong>machines</strong><br />
Accessories<br />
Assembly of STEP-FOUR Basic 540 milling machine € 300,00<br />
7DS4-MONTAGE excl. VAT: € 250,00<br />
Protective cell for Basic 540 € 732,00<br />
95ZELLEB0540 excl. VAT: € 610,00<br />
Protective cell for Basic 1000 € 972,00<br />
95ZELLEB1000 excl. VAT: € 810,00<br />
Protective cell for Precise 760 € 942,00<br />
95ZELLEP0760 excl. VAT: € 785,00<br />
Protective cell for Precise 1000/1000U € 1.248,00<br />
95ZELLEP1000 excl. VAT: € 1.040,00<br />
Supporting base for Basic 540 € 715,20<br />
96-MUG-B0540 excl. VAT: € 596,00<br />
Supporting base for Basic 1000 € 1.140,00<br />
96-MUG-B1000 excl. VAT: € 950,00<br />
Supporting base for Precise 760 € 1.020,00<br />
96-MUG-P0760 excl. VAT: € 850,00<br />
Supporting base for Precise 1000/1000U € 1.140,00<br />
96-MUG-P1000 excl. VAT: € 950,00<br />
Vacuum table 4530 for Basic 540, 450 x 300 mm € 230,40<br />
94VACUUMA3WR excl. VAT: € 192,00<br />
Vacuum table 6040 for Precise 760, 600 x 400 mm € 276,00<br />
94VACUUMA2WR excl. VAT: € 230,00<br />
Vacuum table 6040 for Precise 1000/1000 U,<br />
1000 x 600 mm € 528,00<br />
94VAC10060WR excl. VAT: € 440,00<br />
Protective top skin 4530, 450 x 300 mm (replacement) € 8,40<br />
94VAC-MAT-A3 excl. VAT: € 7,00<br />
Protective top skin 6040, 600 x 400 mm (replacement) € 13,20<br />
94VAC-MAT-A2 excl. VAT: € 11,00<br />
Protective top skin 10006, 1000 x 600 mm (replacement) € 21,60<br />
94VAC-MAT-16 excl. VAT: € 18,00<br />
T-slot plate for Basic 540 € 528,00<br />
97T-NUT-B540 excl. VAT: € 440,00<br />
T-slot plate for Basic 1000 € 1.104,00<br />
97T-NUT-B100 excl. VAT: € 920,00<br />
T-slot plate for Precise 760 € 756,00<br />
97T-NUT-P760 excl. VAT: € 630,00<br />
T-slot plate for Precise 1000/1000U € 1.236,00<br />
97T-NUT-P100 excl. VAT: € 1.030,00<br />
T-slot fixing set (12 parts) € 252,00<br />
97T-NUTSPANN excl. VAT: € 210,00<br />
Magnetic valves for Precise 760 € 262,80<br />
91MAGNETPREC excl. VAT: € 219,00<br />
STEP-FOUR GmbH 〡 Bayernstraße 77 〡 5071 Wals-Siezenheim | AUSTRIA<br />
pricelist 2012<br />
Phone +43 (0) 662 / 45 93 78-0 〡 Fax +43 (0) 662 / 45 93 78-20 〡 office@step-<strong>four</strong>.at 〡 www.step-<strong>four</strong>.at Seite |3
<strong>Milling</strong> <strong>machines</strong><br />
<strong>Milling</strong> Software XpertMILL V2<br />
XpertMILL V2 LT (available only together with SF-C2 motor control unit and milling machine)<br />
€ 140,40<br />
80XP--LT--V2 excl. VAT: € 117,00<br />
STEP-FOUR XpertMILL V2 Pro, single user licence<br />
€ 301,20<br />
80XP-MILH-V2 excl. VAT: € 251,00<br />
STEP-FOUR Xpert[DRAW] V2, extension module CAD-operation (only with V2 Pro and Industry)<br />
€ 144,00<br />
80XP-DRAW-V2 excl. VAT: € 120,00<br />
STEP-FOUR Xpert[CAM] V2, extension module milling technology (only with V2 Pro and Industry)<br />
€ 468,00<br />
80XP--CAM-V2 excl. VAT: € 390,00<br />
STEP-FOUR Xpert[ROTATE] V2, extension module rotation axis incl. activation of 4th axis in XpertCNC controller (only with V2 Pro<br />
and Industry)<br />
€ 468,00<br />
80XP--ROT-V2 excl. VAT: € 390,00<br />
Software Protection Plug<br />
USB-software-protection key to prepare data on external PC (basic equipment)<br />
€ 66,00<br />
92XPERT-USB1 excl. VAT: € 55,00<br />
USB-software-protection key, see above (from second key on, max. 3 keys available per licence)<br />
€ 204,00<br />
92XPERT-USB2 excl. VAT: € 170,00<br />
Update within XpertMILL V2<br />
Update of XpertMILL V2 LT to XpertMILL V2 Pro<br />
€ 168,00<br />
80XP-V2-UPD1 excl. VAT: € 140,00<br />
Update of XpertMILL V1 to XpertMILL V2<br />
Update of XpertMILL V1 LT to V2 LT<br />
€ 60,00<br />
80XP1V2UPD01 excl. VAT: € 50,00<br />
Update of XpertMILL V1 LT to V2 Pro<br />
€ 270,00<br />
80XP1V2UPD02 excl. VAT: € 225,00<br />
Update of XpertMILL basic version V1 to V2 Pro<br />
€ 120,00<br />
80XP1V2UPD04 excl. VAT: € 100,00<br />
Update of Xpert[DRAW] V1 extension module "CAD operation" to Xpert[DRAW] V2<br />
€ 36,00<br />
80XP1V2UPD06 excl. VAT: € 30,00<br />
Update of Xpert[CAM] V1 extension module "milling technology" to Xpert[CAM] V2<br />
€ 36,00<br />
80XP1V2UPD07 excl. VAT: € 30,00<br />
Update of Xpert[ROTATE] V1 extension module "rotary table" to Xpert[ROTATE] V2<br />
80XP1V2UPD10<br />
free<br />
STEP-FOUR GmbH 〡 Bayernstraße 77 〡 5071 Wals-Siezenheim | AUSTRIA<br />
pricelist 2012<br />
Phone +43 (0) 662 / 45 93 78-0 〡 Fax +43 (0) 662 / 45 93 78-20 〡 office@step-<strong>four</strong>.at 〡 www.step-<strong>four</strong>.at Seite |4
<strong>Milling</strong> <strong>machines</strong><br />
Updates <strong>Milling</strong> Software DOS V4 to XpertMILL V2<br />
Update of milling software V4LT to XpertMILL V2 LT (available only in combination with XpertLINK or XpertCNC)<br />
€ 84,00<br />
80XP4V2UPD01 excl. VAT: € 70,00<br />
Update of milling software V4LT to XpertMILL V2 Pro (available only in combination with XpertLINK or XpertCNC)<br />
€ 288,00<br />
80XP4V2UPD02 excl. VAT: € 240,00<br />
Update of milling software V4 Pro to XpertMILL V2 Pro (available only in combination with XpertLINK or XpertCNC)<br />
€ 144,00<br />
80XP4V2UPD03 excl. VAT: € 120,00<br />
Update of V4 extension module 1 "Drawing and Object Manipulation" to Xpert[DRAW] V2<br />
€ 36,00<br />
80XP4V2UPD05 excl. VAT: € 30,00<br />
Update of V4 extension module 2 "Reaming and Layer Definition" to Xpert[CAM] V2<br />
€ 36,00<br />
80XP4V2UPD06 excl. VAT: € 30,00<br />
Accessories Software<br />
Single Line Fonts (6 pcs.) for Windows, engraving fonts<br />
€ 186,00<br />
8SWSL-FONT00 excl. VAT: € 155,00<br />
DeskProto 5.x Lite, post-processor to create milling contours<br />
€ 297,60<br />
8SW-DP700400 excl. VAT: € 248,00<br />
DeskProto 5.x full version, post-processor to create milling contours<br />
€ 1.194,00<br />
8SW-DP700100 excl. VAT: € 995,00<br />
TurboCAD Professional V.17<br />
€ 805,70<br />
8SW-TCPROF17 excl. VAT: € 671,42<br />
STEP-FOUR GmbH 〡 Bayernstraße 77 〡 5071 Wals-Siezenheim | AUSTRIA<br />
pricelist 2012<br />
Phone +43 (0) 662 / 45 93 78-0 〡 Fax +43 (0) 662 / 45 93 78-20 〡 office@step-<strong>four</strong>.at 〡 www.step-<strong>four</strong>.at Seite |5
<strong>Milling</strong> <strong>machines</strong><br />
Accessories<br />
XpertLINK Windows adapter for SF-C2 (sold with a software licence only)<br />
€ 300,00<br />
92XPERT-LINK excl. VAT: € 250,00<br />
XpertMill<br />
SF-C3 motor control unit incl. relay outputs (sold with a software licence only)<br />
€ 502,80<br />
9285000SF-C3 exkl. MwSt: € 419,00<br />
Xport interface to control external systems (sold with a software licence only)<br />
€ 438,00<br />
92XPERT-LIFA excl. VAT: € 365,00<br />
XpertCNC Dynamic <strong>Step</strong> Control 2A (sold with a software licence only)<br />
€ 1.620,00<br />
92XPERTCNC2A excl. VAT: € 1.350,00<br />
XpertCNC Dynamic <strong>Step</strong> Control 3A (sold with a software licence only)<br />
€ 2.016,00<br />
92XPERTCNC3A excl. VAT: € 1.680,00<br />
XpertCNC Dynamic <strong>Step</strong> Control 2A-SFU with integrated high frequency converter (sold with a software licence only)<br />
€ 2.304,00<br />
92XPERTCNCSF excl. VAT: € 1.920,00<br />
Xpert relay box<br />
€ 516,00<br />
92XPERTRELAI excl. VAT: € 430,00<br />
XpertH-Box manual control<br />
€ 444,00<br />
92XPERTH-BOX excl. VAT: € 370,00<br />
Xpert emergency stop switch for immediate milling stop<br />
€ 50,40<br />
92XPERTNOTAU excl. VAT: € 42,00<br />
Processing Units<br />
PROXXON IB/E 220V router<br />
€ 111,60<br />
93PROXXON220 excl. VAT: € 93,00<br />
KRESS 800 FME, router 800W, with 6 mm and 1/8" collet<br />
€ 162,00<br />
93KRE-800FME excl. VAT: € 135,00<br />
KRESS 1050 FME, router 1050W, with 8 mm collet<br />
€ 186,00<br />
93KRE1050FME excl. VAT: € 155,00<br />
Cap nut for Kress 800 / 1050 FME<br />
€ 21,84<br />
04KRSZ120000 excl. VAT: € 18,20<br />
2 mm / 3 mm collet for Kress 800 / 1050 FME<br />
€ 25,20<br />
04KRSZ120XXX excl. VAT: € 21,00<br />
1/8" / 4mm collet for Kress 800 / 1050 FME<br />
€ 19,20<br />
04KRSZ120XXX excl. VAT: € 16,00<br />
6 mm / 8 mm collet for Kress 800 / 1050FME<br />
€ 18,00<br />
04KRSZ120XXX excl. VAT: € 15,00<br />
Tool and reference switches<br />
€ 103,20<br />
91WZS-REFERS excl. VAT: € 86,00<br />
Suction collar 43mm incl. Brush for Kress router<br />
€ 138,00<br />
98-KR-ABSAUG excl. VAT: € 115,00<br />
STEP-FOUR GmbH 〡 Bayernstraße 77 〡 5071 Wals-Siezenheim | AUSTRIA<br />
pricelist 2012<br />
Phone +43 (0) 662 / 45 93 78-0 〡 Fax +43 (0) 662 / 45 93 78-20 〡 office@step-<strong>four</strong>.at 〡 www.step-<strong>four</strong>.at Seite |6
<strong>Milling</strong> <strong>machines</strong><br />
Replacement brush for suction collar, 50mm<br />
€ 38,40<br />
7V-BUERSTE-1 excl. VAT: € 32,00<br />
Replacement brush for suction collar, 60mm<br />
€ 38,40<br />
7V-BUERSTE-2 excl. VAT: € 32,00<br />
Engraving device for height regulation for KRESS 800 FME router or other 43mm routers<br />
€ 372,00<br />
98-KR-GRAVUR excl. VAT: € 310,00<br />
STEP-FOUR spindle system 160W, cased, incl. cooling block, converter with HF-interface to control the spindle through the<br />
STEP-FOUR milling software, cable, 1/8" collet<br />
€ 1.968,00<br />
93SFSPIND160 excl. VAT: € 1.640,00<br />
STEP-FOUR HF-spindle 160W, cased, incl. Cooling block, for use with XCNC Dynamic <strong>Step</strong> Control 2A-<br />
SFU with integrated HF-converter<br />
€ 1.134,00<br />
93SF-SPINDWH excl. VAT: € 945,00<br />
Sealing air nose for HF-spindle 160W incl. 6m tube, plug nipple and screw in union<br />
€ 62,40<br />
98-SF-SLNASE excl. VAT: € 52,00<br />
suction adaptor for 160W spindle<br />
€ 15,00<br />
98-SF-ABS160 excl. VAT: € 12,50<br />
HF reducing ring from 43 to 33 mm<br />
€ 28,20<br />
61F-RED43/33 excl. VAT: € 23,50<br />
Engraving device for height regulation for STEP-FOUR spindle system and Jäger HF-spindle 33A1<br />
€ 348,00<br />
98-SF-GRAVUR excl. VAT: € 290,00<br />
suction adaptor for engraving device<br />
€ 49,20<br />
98-SF-ABSAUG excl. VAT: € 41,00<br />
HF-spindle-connecting cables for Precise 760/1000/1000 U and Superior 1000<br />
€ 81,60<br />
322-SFAK0760 excl. VAT: € 68,00<br />
Basic 540 cable backfitting HF-spindle wiring in dragchain<br />
€ 88,80<br />
322-SFAK0540 excl. VAT: € 74,00<br />
1/8“ / 3mm / 2,35mm collet for spindle<br />
€ 54,00<br />
04SPANNXXXXX excl. VAT: € 45,00<br />
STEP-FOUR HF-spindle 42-2 W27 FS 300W, cased, incl. cooling block, converter, cable, collet 1/8“<br />
€ 6.128,40<br />
93SPIND42-2W excl. VAT: € 5.107,00<br />
STEP-FOUR external HF-interface to control the HF-spindle 42-2 W27 FS 300W through the STEP-<br />
FOUR milling software<br />
€ 168,00<br />
928571IF-EXT excl. VAT: € 140,00<br />
HSD asynchronic spindle 1000W incl. external converter, interface (for software control), 3 collets<br />
(3.5/6/8mm), only for Superior series<br />
€ 2.376,00<br />
93-HSD1KWSET excl. VAT: € 1.980,00<br />
collet ER20 2-13mm, in 0.5mm steps<br />
€ 16,32<br />
04-ER20-XXXX excl. VAT: € 13,60<br />
STEP-FOUR plotting knife incl. knife holder, knife, set of films, sample disk<br />
€ 264,00<br />
93SCHLEPPM01 excl. VAT: € 220,00<br />
plotter-pen incl. 4 refills, for 33mm clamp collar<br />
€ 45,60<br />
93PLOTTSTIFT excl. VAT: € 38,00<br />
STEP-FOUR GmbH 〡 Bayernstraße 77 〡 5071 Wals-Siezenheim | AUSTRIA<br />
pricelist 2012<br />
Phone +43 (0) 662 / 45 93 78-0 〡 Fax +43 (0) 662 / 45 93 78-20 〡 office@step-<strong>four</strong>.at 〡 www.step-<strong>four</strong>.at Seite |7
<strong>Milling</strong> <strong>machines</strong><br />
Consumables<br />
Set of bits, solid carbide, 1/8" shank, two flutes (5 pcs., 0,6, 0,8, 1,2, 1,6, 2 mm)<br />
€ 47,64<br />
00FS-VHM9001-1/8 excl. VAT: € 39,70<br />
Set of bits, solid carbide, 1/8" shank, two flutes (5 pcs. of type ..........mm)<br />
€ 47,64<br />
00FS-VHM-XXX excl. VAT: € 39,70<br />
Knife holder<br />
€ 91,20<br />
03-MHRD00501 excl. VAT: € 76,00<br />
Replacement knife<br />
€ 30,00<br />
03ERSATZMESS excl. VAT: € 25,00<br />
Set of films<br />
€ 13,20<br />
7VFOLIENSATZ excl. VAT: € 11,00<br />
STEP-FOUR maintenance set incl. MAKRA assembly cleaner, service oil plus and SYNCO Super Lube<br />
€ 43,20<br />
7V--CLEANSET excl. VAT: € 36,00<br />
MAKRA assembly cleaner 600 ml R3000<br />
€ 6,00<br />
7VREIN-R3000 excl. VAT: € 5,00<br />
MAKRA service oil plus 300 ml<br />
€ 23,70<br />
7VSERVICEOIL excl. VAT: € 19,75<br />
SYNCO Super Lube multi purpose grease, tube 85g<br />
€ 17,40<br />
7VSUPER-LUBE excl. VAT: € 14,50<br />
MINI-COOL mist spray unit (compressor not included)<br />
€ 198,00<br />
94-MINI-COOL excl. VAT: € 165,00<br />
Minimal quantity spray unit MMS-1 (compressor not included)<br />
€ 111,00<br />
94-MMS-1-UNI excl. VAT: € 92,50<br />
JOKISCH lubricant n-Paraffin, 10 l<br />
€ 112,80<br />
7VJOKISCHN-P excl. VAT: € 94,00<br />
GOLF 231-24 compressor, oilfree, 8 bar, 235 l/min, 1,5 kW<br />
€ 352,80<br />
94KOMPRESSOR excl. VAT: € 294,00<br />
NILFISK GM80P high performance vacuum cleaner, for use with vacuum tables<br />
€ 523,20<br />
94GM80P-NILF excl. VAT: € 436,00<br />
STATIC-MAT engraving mat 300x300 mm<br />
€ 91,20<br />
94STATIC-MAT excl. VAT: € 76,00<br />
MULTI TAPE double sided tape, 25 mm wide, 50 m long<br />
€ 18,00<br />
7VMULTI-TAPE excl. VAT: € 15,00<br />
Adhesive<br />
BELI-ZELL adhesive 10min<br />
€ 4,63<br />
7V-BELIZ-100 excl. VAT: € 3,86<br />
BELI-ZELL adhesive 20min<br />
€ 4,22<br />
7V-BELIZ-200 excl. VAT: € 3,52<br />
BELI-ZELL adhesive 20min white<br />
€ 5,44<br />
7V-BELIZ-20W excl. VAT: € 4,53<br />
STEP-FOUR GmbH 〡 Bayernstraße 77 〡 5071 Wals-Siezenheim | AUSTRIA<br />
pricelist 2012<br />
Phone +43 (0) 662 / 45 93 78-0 〡 Fax +43 (0) 662 / 45 93 78-20 〡 office@step-<strong>four</strong>.at 〡 www.step-<strong>four</strong>.at Seite |8
<strong>Milling</strong> <strong>machines</strong><br />
Vliesmatte<br />
vilmill Black 450 x 300 € 3,00<br />
7V-VMBL60-30 excl. VAT: € 2,50<br />
vilmill Black 600x 400 € 3,54<br />
7V-VMBL60-40 excl. VAT: € 2,95<br />
vilmill Black 600 x 750 € 5,28<br />
7V-VMBL60-75 excl. VAT: € 4,40<br />
vilmill Black 600 x 1000 € 6,54<br />
7V-VMBL60-100 excl. VAT: € 5,45<br />
vilmill SC 1328 300 x 450 € 12,60<br />
7V-VMSC30-45 excl. VAT: € 10,50<br />
vilmill SC 1328 300 x 500 € 13,80<br />
7V-VMSC30-50 excl. VAT: € 11,50<br />
vilmill SC 1328 400 x 500 € 18,00<br />
7V-VMSC40-50 excl. VAT: € 15,00<br />
vilmill SC 1328 400 x 600 € 21,24<br />
7V-VMSC40-60 excl. VAT: € 17,70<br />
vilmill SC 1328 450 x 750 € 29,40<br />
7V-VMSC45-75 excl. VAT: € 24,50<br />
vilmill SC 1328 € 83,10 / m²<br />
7V-VMSC10-MM excl. VAT: € 69,25<br />
Brass tubing<br />
brass tubing hard 1000 x 11 x 10<br />
€ 3,80<br />
M20-10011-10 excl. VAT: € 3,80<br />
brass tubing hard 1000 x 13 x 12<br />
€ 5,00<br />
M20-10013-12 excl. VAT: € 5,00<br />
brass tubing hard 1000 x 14 x 12<br />
€ 8,10<br />
M20-10014-12 excl. VAT: € 8,10<br />
brass tubing hard 1000 x 18 x 16<br />
€ 10,80<br />
M20-10018-16 excl. VAT: € 10,80<br />
brass tubing hard 1000 x 20 x 18<br />
€ 11,80<br />
M20-10020-18 excl. VAT: € 11,80<br />
STEP-FOUR GmbH 〡 Bayernstraße 77 〡 5071 Wals-Siezenheim | AUSTRIA<br />
pricelist 2012<br />
Phone +43 (0) 662 / 45 93 78-0 〡 Fax +43 (0) 662 / 45 93 78-20 〡 office@step-<strong>four</strong>.at 〡 www.step-<strong>four</strong>.at Seite |9
<strong>Milling</strong> <strong>machines</strong><br />
Wood<br />
M01-06003020 balsa wood 600 x 300 x 2,0 mm<br />
M01-06003025 balsa wood 600 x 300 x 2,5 mm<br />
M01-06003030 balsa wood 600 x 300 x 3,0 mm<br />
M01-06003040 balsa wood 600 x 300 x 4,0 mm<br />
M01-06003050 balsa wood 600 x 300 x 5,0 mm<br />
M03-04503060 birch plywood 450 x 300 x 6,0 mm<br />
M03-06004060 birch plywood 600 x 400 x 6,0 mm<br />
M03-06203110 birch plywood 620 x 310 x 1,0 mm<br />
M03-06203115 birch plywood 620 x 310 x 1,5 mm<br />
M03-06203120 birch plywood 620 x 310 x 2,0 mm<br />
M03-06203130 birch plywood 620 x 310 x 3,0 mm<br />
M03-06203140 birch plywood 620 x 310 x 4,0 mm<br />
M03-06203150 birch plywood 620 x 310 x 5,0 mm<br />
M03-06203160 birch plywood 620 x 310 x 6,0 mm<br />
M03-06203180 birch plywood 620 x 310 x 8,0 mm<br />
M03-12506230 birch plywood 1250 x 620 x 3,0 mm<br />
M03-12506240 birch plywood 1250 x 620 x 4,0 mm<br />
M03-12506250 birch plywood 1250 x 620 x 5,0 mm<br />
M04-06203110 beech plywood 620 x 310 x 1,0 mm<br />
M04-06203112 beech plywood 620 x 310 x 1,2 mm<br />
M04-06203115 beech plywood 620 x 310 x 1,5 mm<br />
M04-06203120 beech plywood 620 x 310 x 2,0 mm<br />
M04-06203125 beech plywood 620 x 310 x 2,5 mm<br />
M04-06203130 beech plywood 620 x 310 x 3,0 mm<br />
M04-06203140 beech plywood 620 x 310 x 4,0 mm<br />
M04-06203150 beech plywood 620 x 310 x 5,0 mm<br />
M05-04503030 poplar plywood 450 x 300 x 3,0 mm<br />
M05-06003030 poplar plywood 600 x 300 x 3,0 mm<br />
M05-06004030 poplar plywood 600 x 400 x 3,0 mm<br />
M05-08504630 poplar plywood 850 x 460 x 3,0 mm<br />
M05-11504330 poplar plywood 1150 x 430 x 3,0 mm<br />
M05-11506030 poplar plywood 1150 x 600 x 3,0 mm<br />
M10W09004060 depron sheets white 900 x 400 x 3 mm<br />
M10W09004060 depron sheets white 900 x 400 x 6 mm<br />
€ 1,94 excl. VAT: € 1,94<br />
€ 2,12 excl. VAT: € 2,12<br />
€ 2,20 excl. VAT: € 2,20<br />
€ 2,44 excl. VAT: € 2,44<br />
€ 2,64 excl. VAT: € 2,64<br />
€ 4,50 excl. VAT: € 4,50<br />
€ 8,00 excl. VAT: € 8,00<br />
€ 7,90 excl. VAT: € 7,90<br />
€ 7,70 excl. VAT: € 7,70<br />
€ 11,40 excl. VAT: € 11,40<br />
€ 4,90 excl. VAT: € 4,90<br />
€ 5,30 excl. VAT: € 5,30<br />
€ 5,90 excl. VAT: € 5,90<br />
€ 6,40 excl. VAT: € 6,40<br />
€ 7,30 excl. VAT: € 7,30<br />
€ 13,30 excl. VAT: € 13,30<br />
€ 15,20 excl. VAT: € 15,20<br />
€ 17,50 excl. VAT: € 17,50<br />
€ 8,60 excl. VAT: € 8,60<br />
€ 9,40 excl. VAT: € 9,40<br />
€ 9,80 excl. VAT: € 9,80<br />
€ 13,30 excl. VAT: € 13,30<br />
€ 14,60 excl. VAT: € 14,60<br />
€ 15,40 excl. VAT: € 15,40<br />
€ 20,40 excl. VAT: € 20,40<br />
€ 21,00 excl. VAT: € 21,00<br />
€ 1,50 excl. VAT: € 1,50<br />
€ 2,00 excl. VAT: € 2,00<br />
€ 2,70 excl. VAT: € 2,70<br />
€ 3,50 excl. VAT: € 3,50<br />
€ 4,22 excl. VAT: € 4,22<br />
€ 5,60 excl. VAT: € 5,60<br />
€ 13,10 excl. VAT: € 13,10<br />
€ 15,20 excl. VAT: € 15,20<br />
STEP-FOUR GmbH 〡 Bayernstraße 77 〡 5071 Wals-Siezenheim | AUSTRIA<br />
pricelist 2012<br />
Phone +43 (0) 662 / 45 93 78-0 〡 Fax +43 (0) 662 / 45 93 78-20 〡 office@step-<strong>four</strong>.at 〡 www.step-<strong>four</strong>.at Seite |10
Hot-Wire-Cutting <strong>machines</strong><br />
Wing Construction Programm WING designer V2<br />
Basic module V2 incl. wing editor, data base and printing function<br />
€ 264,00<br />
8S4-WD-GRUND excl. VAT: € 220,00<br />
Extension module airfoil editor incl. HPGL-export<br />
€ 102,00<br />
8S4-WDPROFIL excl. VAT: € 85,00<br />
Extension module milling and DXF for the export of STEP-FOUR milling files (SMF) and DXFfiles<br />
into STEP-FOUR milling software V3/4<br />
€ 156,00<br />
8S4-WD-S4PRO excl. VAT: € 130,00<br />
Extension module cutting for the export of STEP-FOUR cutting files (SWF) into STEP-FOUR<br />
cutting software V3<br />
€ 132,00<br />
8S4-WD-S4CUT excl. VAT: € 110,00<br />
LiftOff - Software for aerodynamic and statics at the airplane model construction<br />
€ 191,60<br />
8SW-LIFTOFFD excl. VAT: € 159,67<br />
Update to WING designer V2<br />
€ 60,00<br />
8S4-WD-UPDV2 excl. VAT: € 50,00<br />
Wing Cutting Machines<br />
PC-CUT Standard, working area 320 x 560 x 300-1400 mm<br />
Wing Cutting Basic Package - kit incl. SF-C2 motor control<br />
unit, wing cutting software V1.66<br />
Wing Cutting Complete Package - as Basic Package plus<br />
cutting transformer<br />
Wing Cutting Professional Package - as Complete Package<br />
plus professional cutting software V4 Pro<br />
90S-M6041145<br />
€ 3.414,00<br />
excl. VAT: € 2.845,00<br />
90S-M8060145<br />
€ 4.230,00<br />
excl. VAT: € 3.525,00<br />
0<br />
€ 3.750,00<br />
excl. VAT: € 3.125,00<br />
Professional Cutting Machine<br />
PC-CUT 1000 working area 1000 x 1000 x 300-1400 mm<br />
PC-CUT 1000 Complete Package - assembled portal units, incl.<br />
motor control unit, cutting transformer, cutting software V4 Pro, incl.<br />
electronic wire tensioning system and supporting base<br />
90CUT1000KPA<br />
€ 13.440,00<br />
excl. VAT: € 11.200,00<br />
Turntable with software extension incl. Extension Module "Turn Table Control" (only for PC-CUT 1000)<br />
€ 3.048,00<br />
98-DREHT-CUT excl. VAT: € 2.540,00<br />
Assembly of turntable<br />
€ 252,00<br />
7D-DREHT-MON excl. VAT: € 210,00<br />
STEP-FOUR GmbH 〡 Bayernstraße 77 〡 5071 Wals-Siezenheim | AUSTRIA<br />
pricelist 2012<br />
Phone +43 (0) 662 / 45 93 78-0 〡 Fax +43 (0) 662 / 45 93 78-20 〡 office@step-<strong>four</strong>.at 〡 www.step-<strong>four</strong>.at Seite |11
Hot-Wire-Cutting <strong>machines</strong><br />
Accessoires<br />
Wing cutting software V1.66 (not possible with external systems)<br />
€ 132,00<br />
8SW-CUT--V1X excl. VAT: € 110,00<br />
Update of V2 to cutting software Version 3 Pro<br />
€ 122,40<br />
8SW-UPDSN300 excl. VAT: € 102,00<br />
Update of V3 to cutting software Version 4 Pro<br />
€ 120,00<br />
8SWSNUPDV400 excl. VAT: € 100,00<br />
Cutting software V4 LT<br />
€ 354,00<br />
8SWSNX-LT400 excl. VAT: € 295,00<br />
Update of V4LT to V4 Pro<br />
€ 588,00<br />
8SWSNUPDLT00 excl. VAT: € 490,00<br />
Cutting software V4 Pro<br />
€ 903,60<br />
8SWSNPR4-X00 excl. VAT: € 753,00<br />
Extension module 1 "Drawing and Object Manipulation" (only available with V4 Pro)<br />
€ 108,00<br />
8SWSNPR4M100 excl. VAT: € 90,00<br />
Extension module 2 "Turntable control"<br />
€ 444,00<br />
8SWSNPR4M200 excl. VAT: € 370,00<br />
LPT-software protection plug to prepare data on external PC (max. 3 per software licence)<br />
€ 36,00<br />
8SW-DONGLE00 excl. VAT: € 30,00<br />
USB-software protection plug to prepare data on external PC (max. 3 per software licence)<br />
€ 66,00<br />
8SW-DONG-USB excl. VAT: € 55,00<br />
Dongle to control external systems (sold only with a software licence)<br />
€ 60,00<br />
8SW-DONGLF00 excl. VAT: € 50,00<br />
Interface to control external systems incl. current reduction (sold only with a software licence)<br />
€ 163,20<br />
8SW-IF-PROFI excl. VAT: € 136,00<br />
Cutting transformer for software-controlled cutting temperature<br />
€ 492,00<br />
9285400420ST excl. VAT: € 410,00<br />
Replacement wire, ready made<br />
€ 30,00<br />
7VW-06-KONFI excl. VAT: € 25,00<br />
SafeCoat (5kg) WI-PR-001<br />
€ 78,00<br />
7V-SAFE-COAT excl. VAT: € 65,00<br />
STEP-FOUR GmbH 〡 Bayernstraße 77 〡 5071 Wals-Siezenheim | AUSTRIA<br />
pricelist 2012<br />
Phone +43 (0) 662 / 45 93 78-0 〡 Fax +43 (0) 662 / 45 93 78-20 〡 office@step-<strong>four</strong>.at 〡 www.step-<strong>four</strong>.at Seite |12
Hot-Wire-Cutting <strong>machines</strong><br />
Cutting Wire<br />
cutting wire d=0,2mm Type 2000, ME=2m € 4,14<br />
7VW-2000-022 excl. VAT: € 3,45<br />
cutting wire d=0,2mm Type 2000, ME=10m € 20,70<br />
7VW-2000-02M excl. VAT: € 17,25<br />
cutting wire d=0,2mm Type 2000, ME=0,5K € 204,00<br />
7VW-2000-02R excl. VAT: € 170,00<br />
cutting wire d=0,4mm Type 2000, ME=2m € 3,60<br />
7VW-2000-042 excl. VAT: € 3,00<br />
cutting wire d=0,4mm Type 2000, ME=10m € 18,00<br />
7VW-2000-04M excl. VAT: € 15,00<br />
cutting wire d=0,4mm Type 2000, ME=0,5K € 174,00<br />
7VW-2000-04R excl. VAT: € 145,00<br />
cutting wire d=0,6mm Type 2000, ME=2m € 3,84<br />
7VW-2000-062 excl. VAT: € 3,20<br />
cutting wire d=0,6mm Type 2000, ME=10m € 19,20<br />
7VW-2000-06M excl. VAT: € 16,00<br />
cutting wire d=0,6mm Type 2000, ME=0,5K € 168,00<br />
7VW-2000-06R excl. VAT: € 140,00<br />
cutting wire d=0,4mm Type 2001, ME=2m € 6,48<br />
7VW-2001-042 excl. VAT: € 5,40<br />
cutting wire d=0,4mm Type 2001, ME=10m € 32,40<br />
7VW-2001-04M excl. VAT: € 27,00<br />
cutting wire d=0,4mm Type 2001, ME=0,5K € 378,00<br />
7VW-2001-04R excl. VAT: € 315,00<br />
cutting wire d=0,6mm Type 2001, ME=2m € 7,68<br />
7VW-2001-062 excl. VAT: € 6,40<br />
cutting wire d=0,6mm Type 2001, ME=10m € 38,40<br />
7VW-2001-06M excl. VAT: € 32,00<br />
cutting wire d=0,6mm Type 2001, ME=0,5K € 357,60<br />
7VW-2001-06R excl. VAT: € 298,00<br />
wire guide screw 0,4 mm € 5,04<br />
63S-9085-0N4 excl. VAT: € 4,20<br />
wire guide screw 0,6 mm € 5,04<br />
63S-9085-0N6 excl. VAT: € 4,20<br />
STEP-FOUR GmbH 〡 Bayernstraße 77 〡 5071 Wals-Siezenheim | AUSTRIA<br />
pricelist 2012<br />
Phone +43 (0) 662 / 45 93 78-0 〡 Fax +43 (0) 662 / 45 93 78-20 〡 office@step-<strong>four</strong>.at 〡 www.step-<strong>four</strong>.at Seite |13
Change language