dedalo sp - Maxtech
dedalo sp - Maxtech
dedalo sp - Maxtech
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
SOFTWARE<br />
DEDALO SP - DEDALO NET - MULTIGRAPH<br />
l Microsoft Windows environment<br />
l Monitoring and optimization of electric energy<br />
consumption<br />
l Possibility of managing up to 256 instruments<br />
in a network<br />
l Integrated analysis function of the data stored<br />
by the instruments<br />
l Record format readable by EXCEL and by<br />
other <strong>sp</strong>readsheet softwares
DEDALO, WINTOOL and MULTIGRAPH are softwares dedicated to the acquisition and the graphic representation<br />
of electric parameters measured with MFT, UPM and EMS devices. They allow to set parameters from a PC on the<br />
connected instruments and to di<strong>sp</strong>lay all the measured parameters. The available versions are: software for a single<br />
instrument or management of an instrument network up to 256 instruments. All the versions run on IBM-PC in Microsoft ®<br />
Windows ® 3.1/3.11, Windows ® 95/98, Windows NT environment.<br />
There are 5 configurable languages: English, German, Italian, French and Spanish.<br />
DEDALO SP - Single point<br />
This is the software version delivered with the<br />
instrument UPM6001; it can be requested separatly<br />
to communicate with all the instruments equipped<br />
with a serial port.<br />
It allows to recognise and to comunicate with one<br />
instrument at a time.<br />
The base version enables to carry out the following<br />
operations:<br />
- di<strong>sp</strong>lay all the measurements<br />
- graphic di<strong>sp</strong>lay of trends, waveform, harmonics,<br />
etc…<br />
- transferring of stored data<br />
- programming of the instrument<br />
Options:<br />
The base version of the DEDALO SP software can be<br />
enriched with the following options:<br />
- Rated storing of the parametersin files. Together with<br />
this option the MULTIGRAPH software for analysis is<br />
delivered<br />
- Manual / automatic printout of the measurements<br />
- Remote connection to an instrument throught a<br />
modem connected to the phone line<br />
- Alarms for signalling the breaking of a set threshold<br />
(no. 8 thresholds)<br />
DEDALO NET - multi point<br />
This is the multi-point software version for the<br />
acquisition of all the electric parameters measured<br />
in a network of UPM and MFT instruments.<br />
On the same RS485 serial line it is possible to<br />
connect up to 256 analysers.<br />
The base version of the DEDALO NET offers the same<br />
performances of DEDALO SP software, with the<br />
following additional features:<br />
- Manual / automatic printout of the measurements<br />
- Alarms for signalling the breaking of a set threshold<br />
(no. 8 thresholds)<br />
Options:<br />
The base version of the DEDALONET software can<br />
be enriched with the following features :<br />
- Rated storing of the parametersin files. Together<br />
with this option the MULTIGRAPH software for<br />
analysis is delivered<br />
- Di<strong>sp</strong>lay on synoptic pages of the measurements<br />
carried out . This software allows to recognise and<br />
import files in format BMP. In every page it is<br />
possible to place up to 30 analysers and for each<br />
one it is possible to di<strong>sp</strong>lay one of the measured<br />
parameters.<br />
MULTIGRAPH - analysis<br />
It is a software for analysis and it allows to open and<br />
analyse all the archive files generated by DEDALO.<br />
Main functions:<br />
- di<strong>sp</strong>lay of the stored data in a table, in trends<br />
histograms<br />
- printouts of the stored data in tables, trends,<br />
histograms<br />
- search for a desired value according to the set date<br />
and time<br />
- automatic search of the min/max values.<br />
- saving of the data in EXCEL format for further<br />
analysis.<br />
WINTOOL - free of charge<br />
It is a simple software delivered free of charge in<br />
order to set parameters and to communicate with<br />
instruments equipped with serial port but without<br />
keyboard and di<strong>sp</strong>lay.<br />
It allows to recognise and to communicate with one<br />
instrument at a time.<br />
Through a serial connection it is possible to carry<br />
out the following operations:<br />
- di<strong>sp</strong>lay of all the measurements in tables<br />
- programming of the instruments<br />
Requested features<br />
PC with 486SX/33 Mhz or higher processor Working system Microsoft ® Windows 3.1, 3.11, 95, 98 or Windows NT 4.0 Workstation<br />
4 M RAM for Windows ® 3.1, and 3.11 8 M RAM for Windows ® 95, and 98 16 M RAM for Windows NT<br />
Floppy disk unit 3.5" (1.44MB) or CD-ROM At least 10 MB of free <strong>sp</strong>ace on the hard disk Graphic board VGA<br />
Mouse Serial RS232 communication port Parallel port for protection dongle<br />
Subject to change without prior notice.<br />
1SAUDEDAL003