26/26D Stitcher Head - Ppsokc.com
26/26D Stitcher Head - Ppsokc.com
26/26D Stitcher Head - Ppsokc.com
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Ordering Spare Parts<br />
In time, you will need to replace some parts in your <strong>26</strong>/<strong>26</strong>D style <strong>Stitcher</strong> <strong>Head</strong>. When this happens,<br />
first locate the needed part in one of the following diagrams. Then locate the DeLuxe/Bostitch part<br />
number and contact your Graphic Arts Representative to order the part by the part number,<br />
description and quantity.<br />
Always power down the stitcher machine<br />
before any maintenance or adjustments<br />
are made to the stitcher head.<br />
CAUTION<br />
!<br />
Replacing Spare Parts (Figure 14)<br />
The following are some of<br />
the more <strong>com</strong>mon wear<br />
parts which will need to be<br />
removed and replaced in<br />
your <strong>26</strong>/<strong>26</strong>D style <strong>Stitcher</strong><br />
<strong>Head</strong>. Some <strong>com</strong>mon<br />
replacement parts do not<br />
require the <strong>Stitcher</strong> <strong>Head</strong> to<br />
be removed from the<br />
stitcher machine. These<br />
parts will be addressed first,<br />
then a more specific<br />
explanation for<br />
disassembling and<br />
replacing wear parts for the<br />
<strong>26</strong>/<strong>26</strong>D <strong>Stitcher</strong> <strong>Head</strong> will<br />
follow.<br />
Removing and Replacing<br />
the Wire Cutters<br />
Figure 15<br />
9115<br />
9113<br />
9112<br />
9029<br />
90<strong>26</strong>A<br />
UA2305.2 (3)<br />
<strong>26</strong>01B<br />
9014<br />
9056 (3)<br />
9009-25 or<br />
9009-21X25<br />
0084<br />
9022<br />
9015<br />
9024<br />
9023<br />
2132BA or<br />
2146CA<br />
The Wire Cutters (9048)<br />
have four cutting surfaces,<br />
each of which may be used<br />
by reversing the ends and<br />
positioning in the Face<br />
Plate (2132BA or 2146CA).<br />
Worn Cutters can cause<br />
poor stitch quality. To<br />
9051<br />
9171<br />
9098<br />
9050<br />
9049<br />
9048 (2)<br />
Figure 14 - Replacing Spare Parts<br />
20