26/26D Stitcher Head - Ppsokc.com
26/26D Stitcher Head - Ppsokc.com
26/26D Stitcher Head - Ppsokc.com
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Installation<br />
Pre-Inspection<br />
Carefully inspect the condition of the shipping container before unpacking your <strong>26</strong>/<strong>26</strong>D <strong>Stitcher</strong><br />
<strong>Head</strong>. If the container is broken or damaged and there is evidence that the stitcher head may be<br />
damaged, immediately notify the carrier who delivered the head and the DeLuxe <strong>Stitcher</strong> Graphic Arts<br />
Representative from whom the <strong>26</strong>/<strong>26</strong>D <strong>Stitcher</strong> <strong>Head</strong> was purchased.<br />
Inspection<br />
As you carefully unpack the head, check to make sure all <strong>com</strong>ponents were delivered and are in<br />
good working order. Refer to Figure 1 in this manual for reference to the following pieces:<br />
• <strong>26</strong>/<strong>26</strong>D Manual<br />
• Driver Release Pin<br />
• Wire Guide Spring Assembly<br />
• Bonnet Clamp Block and Bonnet Clamp Handle on <strong>26</strong>01AHD, <strong>26</strong>01DHD and<br />
<strong>26</strong>01EHD style heads<br />
• Bonnet Binder Stud, Bonnet Stud Pin and Bonnet Stud Nut<br />
on 2001DHD and 2301DHD style heads<br />
• Clincher Plate, Points and Slide (supplied with most heads)<br />
• Driving Shaft Connector Link on 2001DHD and 2301DHD style heads<br />
• Stitch Samples<br />
8