Glass Processing - Arsenal-analitik74.ru

Pico Drill with Table
The Pico Drill with table (BO 79.260) is an ideal
starter machine that is also suitable for small
series. This sturdy drilling machine has continuous
speed control from 500 to 1700 rpm and is suitable
for drilling diameters up to approx. 100 mm. The
table has adjustable stoppers for precise positioning
and drilling templates for glass support.
For even more precision, now optionally available
with the cross laser BO 79.215.
The Pico Drill with table can be found in the chapter
"Grinding, Drilling, Sawing " on page 124.
» The Professional Starter Machine «
VERIBOR Suction Holder
» Now Also with 90 mm Diameter «
The VERIBOR suction holder for attaching mounting aids and
templates is now also available with a smaller suction pad,
having a diameter of 90 mm (BO 600.90). Wherever the suction
surface is limited by bothersome contours or if there is not
enough surface available, this suction holder finds use. While
also having excellent suction capacity, it meets the need for a
suction holder between the holders with Ø120 mm (BO 600.20)
and Ø 55 mm (BO 633.11). The suction holder is suitable for all
materials with smooth, flat, airtight surfaces.
This VERIBOR suction holder can be found in the chapter
"Handling" on page 160.
Radius Glass Breaking Pliers
The new radius glass breaking pliers are ideal for rounding off
corners of glass sheets quickly and easily before final polishing.
The tool allows precise break and long service life due to diamond
polished jaws.
These new glass breaking pliers can be found in the chapter
"Glass Cutting, Glass Breaking" on page 46.
» Rounding Off Corners Made Easy «
10