Glass Processing - Arsenal-analitik74.ru

Cutting Fluid
Due to its viscosity and special characteristics, the cutting fluid penetrates deep into the cut and keeps it „warm“, which leads to considerably
improved breaking results. Furthermore, the fluid lubricates the wheel and axle and binds glass dust which forms when cutting.
Suitable for oil glass cutters as well as glass cutters without integrated oil tank. Also available for automatic cutting.
01
SILBERSCHNITT Cutting Fluid
Ensures a soft and precise break · low surface tension · easy penetration into the cut · glass particles are bound,
ensuring unhindered run of the wheel
Glass Cutting
Glass Breaking
Art. No.
BO 027
Art. No.
BO 026
BO 50 028 00
BO 50 028 01
BO 50 028 05
Art. No.
BO 50 028 10
Description
50 ml bottle
1litre, for manual cutting
1litre, for thick glass cutting
30 litres, for thick glass cutting
30 litres, for automatic cutting
Dispenser for Cutting Fluid 250 ml
SILBERSCHNITT Cutting Fluid for Thick Glass
Optimum breaking results of glass thicknesses from 12 mm upwards · also for problematic thicknesses up to
25 mm · water-soluble and environmentally friendly disposal · good lubrication of cutting wheel · viscosity approx.
5 mPas
Art. No.
BO 50 028 00
BO 50 028 01
Art. No.
BO 50 028 10
Contents
1 litre
30 litres
Dispenser for Cutting Fluid 250 ml
T +49 2129 5568-0 · F +49 2129 5568-201 · export@bohle.de · www.bohle.de
43