Glass Processing - Arsenal-analitik74.ru

Manual Glass Cutting
01
The SILBERSCHNITT System 2000
Whether cutting circles, ovals, segments, lateral and corner cut-outs or thick glass:
With the Silberschnitt System 2000, a single glass cutter serves as the basis for all your applications.
Products which are part of this versatile system are identified on the following pages by the Silberschnitt 2000 logo.
Glass Cutting
Glass Breaking
Oil Glass Cutters
A proper cut requires cutting fluid - to open the cut more easily (the cutting fluid penetrates into the fissure) and to lubricate the wheel and axle.
Make your daily work easier with glass cutters with integrated tank for cutting fluid.
SILBERSCHNITT 2000 Oil Glass Cutters - Perfect Cutting of any Glass
This unique oil glass cutter is the basis of the Silberschnitt 2000 system. It can be configured individually and is therefore ideal for complicated
applications - whether for thick or thin glass, shaped or straight cuts. Ideal especially in combination with the ergonomically shaped T-handle.
SILBERSCHNITT 2000.M MASTER Oil Glass Cutter 155°
Perfect cutting of glass due to optimal application of cutting fluid · for
cutting shapes and for glass thicknesses from 6 to 12 mm · 2-valve
technology · round cutting head · trailing, exchangeable Toplife cutting
wheels · sturdy brass handle · cutting angle 155° · straight edge stand-off
distance 6 mm
Art. No.
BO 2000.M
T +49 2129 5568-0 · F +49 2129 5568-201 · export@bohle.de · www.bohle.de
19