SeaBeam 3050 - Elac-Nautik

SB 3050 l SB 3030 l SB 3020 l SB 3012
Specifications and Technical Data
SeaBeam 3050 at a Glance
Technical Data
Operating frequency
50 kHz band
Along track beam width 1° / 1.5° or 3°
Across track beam width 1° or 2°
Pulse length
0.15 ms - 10 ms (0.15 ms only
available in single-ping mode)
Pulse length modes
Manual and automatic
Operation modes
max. ping rate
Single-ping and multi-ping mode
50 swaths per second
max. number of soundings 630 (2 x 315)
Beam spacing
Range resolution
Depth accuracy (sonar sensor)
max. swath coverage sector 140°
max. coverage (approx.)
min. depth (below transducer)
max. depth (approx.)
max. range sampling rate
Physical Specifications *
Hydrophone array*
1° / 2°
Projector array*
1° / 1.5° / 3°
Transmit and receive unit
(permanent installation)*
Equidistance or equiangular
Down to 2 cm
In accordance with IHO SP44
special order
3,500 m
3 m
3,000 m
20 kHz
(= 10 kHz inphase, quadrature phase)
Interfaces
Power
Motion
Heading
Position
Surface sound velocity
Sound velocity profile
115 V / 60 Hz or 230 V / 50 Hz
single phase
RS232 / RS422 or Ethernet
RS232 / RS422 or Ethernet
RS232 / RS422 or Ethernet
RS232 / RS422
RS232 / RS422 or Ethernet
Height (mm) Width (mm) Depth (mm) Weight (kg)
125 / 125 380 / 380 1,581 / 792
Without frames and cables
50 / 25
150 / 150 / 150 2,284 / 1,691 / 1,098 450 / 450 / 450
Without frames and cables
66 / 44 / 22
1,052 607 877 160
Operator station* 177 (4 HE) 483 (19” rack) 505 14
Mobile transducer bracket
(including transducers)
Stabilization
Roll ± 10°
Pitch ± 10°
Yaw ± 5°
Reliability 1° x 1°
System MTBF
System MTBCF
Overall MTTR
3,487 h
3,849 h
0.92 h
286 1,928 789 < 312 (without cables)
L-3 Communications ELAC Nautik GmbH | Neufeldtstrasse 10 | 24118 Kiel | Germany | Tel. +49 (0)431-883 0 | Fax +49 (0)431-883 496
elac.marketing@L-3com.com | www.elac-nautik.de | Design changes and errors reserved. Rev. B 15/03/2013
*Dimensions may change due to special installation requirements. Please ask for dimensional drawings.
4