Manual tire changer - Harbor Freight Tools

More documents

Recommendations

Info

SERVICE 1. Tool service must be performed only by qualified repair personnel. Service or maintenance performed by unqualified personnel could result in a risk of injury. 2. When servicing a tool, use only identical replacement parts. Follow instructions in the “Inspection, Maintenance, And Cleaning” section of this manual. Use of unauthorized parts or failure to follow maintenance instructions may create a risk of electric shock or injury. SPECIFIC SAFETY RULES AND PRECAUTIONS 1. Maintain labels and nameplates on the Tire Changer. These carry important information. If unreadable or missing, contact Harbor Freight Tools for a replacement. 2. Make sure the Tire Changer is located on a flat, level, sturdy surface capable of supporting the weight of the Tire Changer, tires, and any additional tools and equipment. 3. Industrial applications must follow OSHA guidelines. 4. Never stand on the Tire Changer. Serious injury could result if the Tire Changer is tipped. 5. Do not allow children and other unauthorized people to handle or play with the Tire Changer. 6. Do not force the Tire Changer. This tool will do the work better and safer at the speed and capacity for which it was designed. 7. Prior to using the Tire Changer, always read and follow the instructions and safety precautions as outlined in the tire manufacturer and vehicle manufacturer’s owners manuals. 8. Never leave a vehicle running when changing/repairing tires. When running an Engine in an enclosed area, the Engine produces carbon monoxide, a colorless, odorless, toxic gas that, when inhaled, can cause serious personal injury or death. Whenever possible, use a carbon monoxide detector (not included) to detect excessive carbon monoxide fumes in the work area and in the surrounding area. 9. Do not use this product if under the influence of alcohol or drugs. Read warning labels on prescriptions to determine if your judgement or reflexes are SKU 34542 For technical questions, please call 1-800-444-3353 PAGE 4
impaired while taking drugs. If there is any doubt, do not attempt to use this product. 10. Use the right tool for the job. Do not attempt to force a small tool to do the work of a larger industrial tool. There are certain applications for which this product was designed. It will do the job better and more safely at the rate for which it was intended. Do not modify this product, and do not use this product for a purpose for which it was not intended. 11. EXPLOSION DANGER! Never overinflate tires or other inflatable items. When inflating a tire with compressed air, make sure to inflate the tire to the exact PSI as recommended by the tire manufacturer. Always use a pressure gauge (not included) to check the actual pressure in tires. 12. Always dispose of old tires in accordance with local, state, and federal laws. 13. WARNING! The warnings and precautions discussed in this manual cannot cover all possible conditions and situations that may occur. It must be under stood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator. SAVE THESE INSTRUCTIONS UNPACKING When unpacking, check to make sure all the parts shown on the Parts Lists on page 10 are included. If any parts are missing or broken, please call Harbor Freight Tools at the number shown on the cover of this manual as soon as possible. ASSEMBLY INSTRUCTIONS 1. Locate the Hex Bolts (6), Lock Washers (11), Hex Head Nuts (12), Center Post (1), and the Pedestal Base (13). (See Assy. Diagram.) 2. Bolt the Pedestal Base (13) to the Center Post (1), using the Hex Bolts (6), Lock Washers (11), and Hex Head Nuts (12). NOTE: The end of the Pedestal Base with the triangular stop should be directly in front of the Bead Breaker Handle (7) and Bead Breaker Shoe (10). (See Assy. Diagram.) 3. Bolt the two Side Base Channels (9) into place. (See Assy. Diagram.) SKU 34542 For technical questions, please call 1-800-444-3353 PAGE 5
Page 1 and 2: MANUAL TIRE CHANGER Model 34542 ASS
Page 3: 3. Keep bystanders, children, and v
Page 7 and 8: OPERATING INSTRUCTIONS Bead Breakin
Page 9 and 10: 4. If the wheel has a tall rim with
Page 11: WARRANTY LIMITED 90 DAY WARRANTY Ha

Manual tire changer - Harbor Freight Tools

Create successful ePaper yourself

Delete template?

Save as template?