Specification of RTRM08 Transceiver Module Easywave I2C - ELDAT

More documents

Recommendations

Info

Specification Index 1.01 Project No. RF-Products, Controller RTRM08 Transceiver Module Easw I 2 C Page 24 Development Production S. Schreiber 2007-08-24 7007 Operating Conditions Min Max Units Conditions Input low voltage 0 0.8 V 4.5 V
Specification Index 1.01 Project No. RF-Products, Controller RTRM08 Transceiver Module Easw I 2 C Page 25 Development Production S. Schreiber 2007-08-24 7007 Characteristics Min Typ Max Units Conditions Supply current while powered down - 2.2 µA 25°C, V CC = 3 V Supply current while powered down when a start condition and an I 2 C-address is on the I 2 C-bus Frequency of carrier 868.3 MHz +/- 50 kHz Output power (whip antenna) +2 - 3.4 µA 25°C, V CC = 5 V - 7.5 µA 85°C, V CC = 3 V - 10.8 µA 85°C, V CC = 5 V - 1.0 mA V CC = 3 V - 1.7 mA V CC = 5 V +5 dBm dBm V CC = 2.1 V V CC = 3 V +9 dBm V CC = 5 V Receiver sensitivity (whip antenna) -105 dBm Approval standards EN 300 220-1 V1.3.1 (2000-09) EN 300 220-3 V1.1.1 (2000-09) 4 Mechanical Specification Please refer to Figure 13. Use the transceiver module with the supplied antenna.
Page 1 and 2: Specification Index 1.01 Project No
Page 23: Specification Index 1.01 Project No

Specification of RTRM08 Transceiver Module Easywave I2C - ELDAT

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?