SPeCiFiCATiOnS - Pioneer UAE

More documents

Recommendations

Info

Indulge in true-to-life listening experience with pioneer’s latest 2-channel audio components. With the direct energy amplifier on the integrated amplifier and Hi-bit32 audio signal processing on the super audio Cd players, the elaborate construction and sound technology provide maximum audio performance with minimum noise, to bring out the subtle nuances of your music in its purest form. SPeCiFiCATiOnS: inTegRATeD AMPliFieRS Integrated Amplifiers A-30-K A-10-K distinctively pure Amplifier Section 70 W + 70 W 50 W + 50 W 20 Hz-20 kHz, THD 0.1 %, 4 ohms 20 Hz-20 kHz, THD 0.1 %, 4 ohms Rated Output (Stereo) 40 W + 40 W 30 W + 30 W 20 Hz-20 kHz, THD 0.05 %, 8 ohms 20 Hz-20 kHz, THD 0.05 %, 8 ohms THD Rated Output (-3 dB, 8 ohms, 1 kHz) 0.01 % 0.01 % 4-16 ohms (A or B) 4-16 ohms (A or B) Guaranteed Speaker Impedance (2 Speaker Terminals) 8-32 ohms (A + B) 8-32 ohms (A + B) 4-16 ohms (Bi-wiring) 4-16 ohms (Bi-wiring) Frequency Response SACD/CD 105 dB 105 dB Signal-to-Noise Ratio Phono 77 dB 77 dB (IHF, A Network, Short Circuited) Power Amp Direct 118 dB — 90 dB (100 Hz) 90 dB (100 Hz) SACD/CD 90 dB (1 kHz) 90 dB (1 kHz) Channel Separation Power Amp Direct 90 dB (1 kHz) — 85 dB (10 kHz) — Direct Energy Design Integrated Amplifier with Symmetrical Construction, Aluminium Volume Knob/Panels, and NEW 7:Phono (MM), SACD/CD, Tuner, AUX, Recorder, A-30-K Audio Input Terminals Phono MM 6:Phono (MM), SACD/CD, Tuner, AUX, Recorder, Network Network, Power Amp Direct In Audio Output Terminals Recorder, Phones Recorder, Phones SR In/Out 1/1 — Remote Control Unit Preset Remote — Power Requirement and Dimensions Power Requirements AC 220-230 V, 50 Hz AC 220-230 V, 50/60 Hz Power Consumption 175 W 135 W Power Consumption During Standby 0.3 W 0.3 W Dimensions (W x H x D) 435 × 128 × 360 mm 435 × 128 × 360 mm Weight 7.9 kg 6.7 kg 5 Hz-100 kHz, 0 dB/-3 dB 75 dB (10 kHz) 5 Hz-100 kHz, 0 dB/-3 dB 75 dB (10 kHz) 20 Hz-20 kHz, ±0.5 dB (RIAA Equalisation) MM 90 dB (100 Hz) 20 Hz-20 kHz, ±0.5 dB (RIAA Equalisation) MM — To Your Heart’s Content SPeCiFiCATiOnS: SuPeR AuDiO CD PlAyeRS PD-50-K PD-10-K Playback Media & Formats SACD/CD/CD-R/CD-RW/DVD-R*/DVD-RW* • • DSD Disc • • MP3/WMA/MPEG-4 AAC • • (except MPEG-4 AAC) iPod/iPhone/iPad Digital Transmission • — Audio Features Hi-bit32 Audio Processing • — Auto Level Control • — Advanced Sound Retriever • • SACD Frequency Response 2 Hz-50 kHz 2 Hz-50 kHz S/N Ratio 117 dB 117 dB Dynamic Range 108 dB 108 dB THD 0.0020 % 0.0020 % CD Frequency Response 2 Hz-20 kHz 2 Hz-20 kHz S/N Ratio 117 dB 117 dB Dynamic Range 100 dB 100 dB THD 0.0022 % 0.0022 % Terminals USB Input for Memory Audio 1 (Front) 1 (Front) Analogue Output 1 (Gold-Plated) 1 Digital Coaxial Output 1 (Gold-Plated) 1 Digital Optical Output 1 1 Digital Coaxial Input 1 (Gold-Plated, DAC Mode) — Digital Optical Input 1 (DAC Mode) — SR In/Out 1/1 — Others Remote Control Unit Preset Remote Preset Remote Power Requirement and Dimensions Power Requirement 220-240 V 50/60 Hz 220-240 V 50/60 Hz Power Consumption NEW A-10-K Direct Energy Design Integrated 41 Amplifier W with Symmetrical Construction and Phono MM20 W Power Consumption during Standby 0.45 W 0.45 W Dimensions (W x H x D) 435 x 130 x 329 mm 435 x 128 x 329 mm Weight 7.8 kg 5.2 kg * Audio only PIONEER CORPORATION 1-1, Shin-Ogura, Saiwai-ku, Kawasaki-shi, Kanagawa-ken 212-0031, Japan http://pioneer.jp PIONEER ELECTRONICS ASIACENTRE PTE. LTD. (Co. Reg. No.: 199203130M) 253 Alexandra Road, #04-01, Singapore 159936 Service Hotline: (65)-6472-7555 http://www.pioneer.com.sg PIONEER TECHNOLOGY (MALAYSIA) SDN. BHD. 16th Floor, Menara Uni. Asia, 1008 Jalan Sultan Ismail, 50250 Kuala Lumpur, Malaysia Service Hotline: (60)-3-2697-2920 http://www.pioneer.my PIONEER GULF FZE Lob 11-017, Jebel Ali, Free Zone, P.O. Box 61226, Jebel Ali, Dubai, U.A.E. Tel.: (971)-4-8815756 Fax: (971)-4-8816414 http://www.pioneer-mea.com Available in Malaysia only Not available in Malaysia PIONEER and the Pioneer logo are registered trademarks of Pioneer Corporation. “Made for iPod,” “Made for iPhone,” and “Made for iPad” mean that an electronic accessory has been designed to connect specifically to iPod, iPhone, or iPad, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod, iPhone, or iPad may affect wireless performance. iPhone, iPad, iPod and iPod touch are registered trademarks of Apple Inc., registered in the U.S. and other countries. For details on iPod compatibility, visit http://pioneer.jp/homeav/support/ios/ao/ Windows and the Windows logo are trademarks of the Microsoft group of companies. The DVD logo is a registered trademark of DVD Format/Logo Licensing Corporation. “SACD” and “Super Audio CD” are trademarks of Sony Corporation Published by Pioneer Corporation. Copyright © 2012 Pioneer Corporation. All rights reserved. Note: Specifications and design subject to change without notice. 3174L 12 2ch Components Catalogue (PAC/PGF) 8,500-ADKI/CCI 08-12 Printed in Japan
Super Audio CD Players Breathtaking Sensation PD-50-K NEW Super Audio CD Player with Hi-bit32 Audio Signal Processing, DSD Disc Playback, Twin Transformer, and iPod/ iPhone/iPad Digital Transmission Feature Highlights of Pioneer's Integrated Amplifiers Direct Energy Amplifier a-30 a-10 Pioneer’s “Direct Energy” concept is pursued to the utmost, featuring optimised power supply/output circuit blocks, as well as parts layout. The unit reproduces clearer sound with reduced distortion. The result is excellent signal transfer and high S/N ratio, with the performance to bring out the best musical reproduction from the integrated amplifier. Isolated Power Supply a-30 a-10 The wirings for the power amplifier, pre-amplifier, and power transformer of the controls are all separated to cut out noise interference. The power circuit for the controls adopts Schottky barrier diodes with minimum noise, which enables noise-free clean power supply to the critical power amplifier section. This allows even more realistic amplification of the audio signals. Symmetrical Power Amp a-30 a-10 The symmetrical power amp provides high channel separation for the whole frequency range as well as low distortion characteristics, realising superb sound image localisation. The amplifier creates lively mid to high-range sound, allowing reproduction of original sound from various sources, including high-resolution audio. Symmetrical Power Amp (A-30) Clean Ground Construction a-30 a-10 The unit’s circuit design is based on the clean ground concept, with the shortest and simplest signal paths. The result is reduced distortion with minimum signal interference for improved sonic clarity. Source Direct Mode a-30 a-10 The integrated amplifiers feature Source Direct Mode, which bypasses all other circuits except for the volume to offer a pure listening experience suitable for musical content. The mode is not just a simple switching, but is finely tuned to enhance the musicality. Input Selector Trans-Stabilizer a-30 Volume Source Direct Mode TONE Circuit Source Direct ON BALANCE Circuit Source Direct Selector Source Direct Driver Power AMP Circuit The trans-stabilizer construction of the chassis dampens unwanted vibration from the transformer to provide steady audio performance. Feature Highlights of Pioneer's Super Audio CD Players Hi-bit32 Audio Signal Processing pd-50 DSD Playback pd-50 pd-10 PD-10-K NEW Super Audio CD Player with Aluminium Front Panel, DSD Disc Playback, and Front USB The technology works to create undistorted sound, bringing out the best in the 32-bit DAC. Using Pioneeroriginal algorithms, Hi-bit32 Audio Processing expands the input bit signals to create a natural and analoguelike waveform, reproducing rich audio even from extremely minute signals. High-resolution 192 kHz/24- bit audio sources can be expanded to 192 kHz/32-bit signals. 1 Actual Effects 24-bit signal wave form comparison 24-bit Processing 1 32-bit Extension Processing Direct Stream Digital (DSD) is the format used for storing extremely high-resolution audio signals on SACDs. DSD represents audio signal size by the density of 1-bit digital pulse, realizing 100 kHz frequency response, and 120 dB dynamic range. CDs are based on the audible range, while DSD can encode and reproduce natural sound, much closer to the analogue source. DSD Waveform Analogue Signal CD PCM Signal SACD DSD Signal * For image only Level Ch1/FS 0 Level Ch2/FS Level Ch1/FS 0 Level Ch2/FS What’s a DSD Disc? DSD audio source (.dsf) downloaded from the internet and recoded on DVD-R/-RW disc. -1 -1 0 2m 4m 6m 8m 10m 12m 14m Time / s 0 2m 4m 6m 8m 10m 12m 14m Time / s Internet 192 kHz/32-bit Twin DAC pd-50 To process high-density signals from the SACD, twin 192 kHz/ 32-bit D/A converters are used on the SACD players. They are parallel-connected for improved audio performance, to reproduce minute musical nuances in master sound quality. Direct Construction with Separate Shield Structure pd-50 pd-10 The SACD players feature a separate shield structure which completely isolates the audio block from the digital/servo power block. Yet, the shortest and simplest paths are provided for signal transmission with Pioneer’s Direct Construction. The result is minimum noise and distortion for crystal clear audio reproduction. DSD Audio Source (.dsf) Download to PC Pure Audio Listening Mode pd-50 pd-10 PC with DVD drive PD-50-K/PD-10-K Playback on player Record on disc DVD-R/RW * DSD audio source created on a portable recorder etc. and recorded on disc can be played back on PD-50/PD-10. Pure Audio Listening mode switches off the digital circuitry and the FL display to provide the purest analogue sound reproduction.
Page 1: SPeCiFiCATiOnS: inTegRATeD AMPliFie

SPeCiFiCATiOnS - Pioneer UAE

Create successful ePaper yourself

Delete template?

Save as template?