Fender Systems - Trelleborg

Unit Elements
Dimensions
Element H A B* C* D F J M W K E Anchors Weight
UE250 250 109 114 71 20–27 152 33 25–35 218 50 300 M20 38
UE300 300 130 138 84 23–32 184 38 30–40 260 50 300 M24 54
UE400 400 165 187 102 25–35 248 41 30–40 330 250 500 M24 89
UE500 500 195 229 119 28–37 306 42 40–52 390 250 500 M30 135
UE550 550 210 252 126 32–38 336 42 40–52 420 250 500 M30 153
UE600 600 225 275 133 35–45 366 42 40–52 450 250 500 M30 179
UE700 700 270 321 163 35–45 428 56 50–65 540 250 500 M36 247
UE750 750 285 344 170 38–45 458 56 50–65 570 250 500 M36 298
UE800 800 300 366 178 38–45 488 56 50–65 600 250 500 M36 338
UE900 900 335 412 198 42–50 550 60 57–80 670 250 500 M42 410
UE1000 1000 365 458 212 46–58 610 60 57–80 730 250 500 M42 509
UE1200 1200 435 557 252 46–60 748 61 65–90 870 250 500 M48 717
UE1400 1400 495 642 281 50–65 856 67 65–90 990 250 500 M48 948
UE1600 1600 565 733 321 50–65 978 76 75–100 1130 250 500 M56 1236
* Asymmetrical bolting version only [Units: mm, kg/m]
Unit Elements are high-performance modular rubber
fenders. Elements are versatile and can be combined in
unlimited combinations of length and direction.
Asymmetrical bolting
The simplest Unit Element system is the UE-V fender, with
pairs of legs and a UHMW-PE non-marking shield. For
heavy duty applications Unit Elements are combined with a
steel panel (frame) which can cope with belting, bow flares,
low hull pressures and high tides.
Symmetrical bolting
Element lengths
600 750 900 1000 1200 1400 1500 1800 2000 Max
UE250 2800
UE300 2000
UE400 2000
UE 500–UE 550 1500
UE 600–UE 800 2000
UE 900–UE 1200 1500
UE1400 2000
UE1600 2000
preferred lengths
typical non-standard lengths
[Units: mm]
For elements with L/H < 1.0 or non-standard
lengths, please ask for advice.
RPD is reported at:
– 1 mm/sec constant test speed
– 23ºC ± 5ºC temperature
– 0º compression angle
Performance to meet local specified
conditions is typically adjusted for
velocity, angle and temperature.
Please refer to Design Manual for more
information on Velocity, Temperature
and Angle Correction factors.
Standard manufacturing and performance tolerances apply. Refer to Design and Testing Manual. M1100-S01-V1-3-EN © Trelleborg AB, 2013
23