Fender Systems - Trelleborg

Super Arch Fenders
Performance Data*
E1.0 E1.5 E2.0 E2.5 E3.0
SAN / SANP 150
SAN / SANP 200
SAN / SANP 250
SAN / SANP 300
SAN / SANP 400
SAN / SANP 500
SAN / SANP 600
SAN / SANP 800
SAN / SANP 1000
E R 5.4 6.5 7.7 8.8 9.9
R R 86 104 121 139 157
E R 9.6 12 14 16 18
R R 114 138 162 186 210
E R 15 18 21 24 28
R R 143 173 202 232 262
E R 22 26 31 35 40
R R 171 207 243 279 314
E R 38 46 54 62 70
R R 229 276 324 371 419
E R 60 73 85 98 110
R R 286 345 405 464 524
E R 86 104 122 140 158
R R 343 414 486 557 629
E R 154 186 218 250 282
R R 457 552 648 743 838
E R 240 290 340 390 440
R R 571 690 810 929 1048
* Reference testing to Design & Testing Manual. Tested at 1 mm/sec speed. Tolerance ± 10%.
Intermediate grades available on request.
[Units: kNm, kN]
SAN / SANP
RPD is reported at:
– 1 mm/sec constant test speed
– 23ºC ± 5ºC temperature
– 0º compression angle
Performance to meet local specified conditions
is typically adjusted for velocity, angle and
temperature.
Please refer to Design Manual for more
information on Velocity, Temperature and Angle
Correction factors.
Generic curve shown. Actual curve geometry may vary depending on grade,
temperature, velocity and angle.
SAN Intermediate deflections
D i (%) 0 5 10 15 20 25 30 35 40 45 50 51.5 55
E i (%) 0 1 6 14 25 37 50 63 74 85 96 100 111
R i (%) 0 24 51 73 89 98 100 96 89 82 91 100 141
Nominal rated deflection may vary at RPD.
Standard manufacturing and performance tolerances apply. Refer to Design and Testing Manual. M1100-S01-V1-3-EN © Trelleborg AB, 2013
37