Hilti HIT-HY 150 MAX post-installed rebars - coBuilder

Hilti HIT-HY 150 MAX
post-installed rebars
Materials
Reinforcmenent bars according to EC2 Annex C Table C.1 and C.2N.
Properties of reinforcement
Product form
Bars and de-coiled rods
Class B C
Characteristic yield strength f yk or f 0,2k (MPa) 400 to 600
Minimum value of k = (f t /f y ) k ≥ 1,08
≥ 1,15
< 1,35
Characteristic strain at maximum force, ε uk (%) ≥ 5,0 ≥ 7,5
Bendability
Maximum deviation from
nominal mass
(individual bar) (%)
Bond:
Minimum relative rib area,
f R,min
Nominal bar size (mm)
≤ 8
> 8
Nominal bar size (mm)
8 to 12
> 12
Bend / Rebend test
± 6,0
± 4,5
0,040
0,056
Setting details
For detailed information on installation see instruction for use given with the package of the product.
Working time, Curing time
Temperature
of the base material T BM
Working time
t gel
Curing time
t cure
-10 °C ≤ T BM < -5 °C 180 min 12 h
-5 °C ≤ T BM < -0 °C 90 min 9 h
0 °C ≤ T BM < 5 °C 45 min 4,5 h
5 °C ≤ T BM < 10 °C 20 min 2 h
10 °C ≤ T BM < 15 °C 7 min 50 min
15 °C ≤ T BM < 20 °C 6 min 40 min
20 °C ≤ T BM < 25 °C 5 min 30 min
25 °C ≤ T BM < 30 °C 3 min 30 min
30 °C ≤ T BM ≤ 40 °C 2 min 30 min
09 / 2012 839