AMUT-BD AUDIO MONITORING UNIT - TSL
AMUT-BD AUDIO MONITORING UNIT - TSL
AMUT-BD AUDIO MONITORING UNIT - TSL
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
6.4.2 AES outputs<br />
Connector type:<br />
Impedance:<br />
DIN41612 pins<br />
75? unbalanced or 110? balanced. Impedance is switch<br />
selected with on-board transformer balancing. To obtain an<br />
unbalanced connection one line of the output needs to be<br />
grounded at an electrically convenient point.<br />
Amplitude: 1V (75 or 2V (110? )<br />
6.4.3 Analogue Audio outputs<br />
Connector Type:<br />
Format:<br />
D/A Conversion:<br />
THD+N:<br />
DIN 41612 pins<br />
Electronically balanced.<br />
24 bit resolution.<br />
>90dB referred to 0dBFS<br />
There are a total of four audio signal outputs, which represent the two channels of two<br />
AES pairs.<br />
6.5. Description of facilities<br />
6.5.1 De-embedding Algorithms<br />
The board provides for the extraction of a four channel audio group as defined by<br />
SMPTE 272M. The clock recovery system mandates that the incoming audio must<br />
be synchronous 48kHz data for proper reproduction, although addition and deletion<br />
of samples is used to overcome minor asynchronism. No guarantee can be given for<br />
audio quality under these conditions.<br />
In the event that one channel pair is absent from the incoming group, the appropriate<br />
pair will be muted.<br />
<strong>AMUT</strong>-<strong>BD</strong> MKII 18 ISSUE 5
Change language