Spray Applied Polymer Surface Seals - TSP2

More documents

Recommendations

Info

G*, Pa, 10 radians/sec, 64C Core Slice Binder & Mix Rheology 12000 10000 8000 6000 4000 2000 0 30000 25000 20000 15000 10000 5000 0 Reclamite Control Top 0.3" Slice 2nd Layer Slice Pass QB CSS-1h CRF Reclamite ERA-25 CSS-1h ERA-1 GSB-B Test on Extracted Binder (G*) Pass QB Test on Extracted Binder From Field Cores (G*) Control Control Reclamite Control 2 Pass QB CSS-1h MN 251 Project CRF AZ 87 Project Reclamite CSS-1h ERA-25 GSB-B Test on Mix Slice (Time to 5% Strain) ERA-1 Control Pass QB Test on Mix Slices from Lab Treated Cores (Time to 5% Strain) 450 400 350 300 250 200 150 100 50 0 2000 1800 1600 1400 1200 1000 800 600 400 200 0 Time to 5% Strain, 58ºC, 68kPa stress Binder tests by WRI, Mix tests by MTE 86
Lessons Learned Core Slice Binder & Mix Rheology Conclusions: • Rejuvenators soften AC near surface only if permeability is sufficient to allow infiltration. • Fog seal products with harder residues do not soften aged AC significantly, but can reduce pavement permeability enough to delay moisture intrusion. These results seemed puzzling until lab permeability results for this pavement were found to be essentially zero. Clearly, rejuvenator oils could not infiltrate to soften oxidized asphalt near the surface. Only direct mixture testing could accurately characterize the mixture in the zone where block crack initiation is likely to occur. Fortunately, results for rejuvenator seals applied to the more permeable Arizona dense mix were much more in line with expectations that rejuvenator seals can soften aged asphalt. Here, the Reclamite rejuvenator emulsion did soften the pavement surface layer as would have been predicted by the binder extraction. In fact, the rejuvenated binder was even softer than the second thin pavement layer in both cases. As expected, the harder emulsion residues in the sealer products had much less impact on the rheology of the surface layer, although they do appear to help retard oxidation when applied to the right pavements at the right time. 87
Page 1 and 2:
Foundation for Pavement Preservatio
Page 3 and 4:
Research Participants Acknowledgeme
Page 5 and 6:
An Effective Preservation Program
Page 7 and 8:
Fog Seal AEMA Definition: a light
Page 9 and 10:
CALTRANS MTAG: Rejuvenating Fog Sea
Page 11 and 12:
What do we know about Fog Seals? L
Page 13 and 14:
Spray Applied Surface Seal : The Pr
Page 15 and 16:
DOT Survey Why Fog Seal? Constructi
Page 17 and 18:
DOT Survey Pavement Age When Fog Se
Page 19 and 20:
Upper Midwest Experiences Nebraska
Page 21 and 22:
Unsealed Shoulders 21
Page 23 and 24:
MN shoulders: Shedding Light Rain 2
Page 25 and 26:
MNDOT - Fog Sealing Chip Seals Ligh
Page 27 and 28:
Fog Seals Reduce Snowplow Damage
Page 29 and 30:
Fog Seals can reduce: •Moisture I
Page 31 and 32:
Lessons Learned Why Fog? Improve Ag
Page 33 and 34:
Lessons Learned Why Fog? Prevent Da
Page 35 and 36: Asphalt Oxidation Chemistry The Pro
Page 37 and 38: Asphalt Oxidation Chemistry The Mec
Page 39 and 40: Asphalt Durability Predicting Block
Page 41 and 42: ARIZONA VALIDATION SITE Constructed
Page 43 and 44: EFFECT OF PAVEMENT DEPTH ON AGED AS
Page 45 and 46: Increasing m-control with aging for
Page 47 and 48: Lessons Learned Fog Seal Product Se
Page 49 and 50: Test Section Locations AZ - US 87,
Page 51 and 52: Lessons Learned Fog Seal Where to U
Page 53 and 54: Lessons Learned Fog Seal Where NOT
Page 55 and 56: Lessons Learned Fog Seal How to Use
Page 57 and 58: Lessons Learned Fog Seal Emulsion P
Page 59 and 60: Lessons Learned Fog Seal over Chip
Page 61: Lessons Learned How to Apply Seals
Page 64 and 65: Lessons Learned How to Apply Seals
Page 66 and 67: Lessons Learned Controlling Frictio
Page 68 and 69: Lessons Learned IFI (International
Page 70 and 71: Lessons Learned Pavement Permeabili
Page 72 and 73: Lessons Learned Fog Seal Emulsion I
Page 74 and 75: Lessons Learned Fog Seal Pavement F
Page 76 and 77: Lessons Learned Comparison of Frict
Page 78 and 79: Lessons Learned Fog Seal Binder Pro
Page 80 and 81: Rheology Testing of Field Samples G
Page 82 and 83: Permeabilities - MN 251 & OCR 112 1
Page 84 and 85: Permeabilities for AZ & CA 1 All da
Page 88 and 89: Fog Seal Low Temperature Mix Stiffn
Page 90 and 91: Lessons Learned Static Bending Test
Page 92 and 93: Asphalt Emulsion • Emulsion = A n
Page 94 and 95: Lessons Learned Fog Seal Emulsion P
Page 96 and 97: Field Observations Notes & photos
Page 98 and 99: Summary Findings Seals are particu
Page 100 and 101: Need for Improved Specifications fo
Page 102 and 103: Recommendations for Future Study N
show all

Spray Applied Polymer Surface Seals - TSP2

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?