MODEL: CB - Shark Pressure Washers
MODEL: CB - Shark Pressure Washers
MODEL: CB - Shark Pressure Washers
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
OPERATOR’S MANUAL PRESSURE WASHER<br />
Water<br />
Supply<br />
Garden Hose<br />
(not included)<br />
Quick<br />
Coupler<br />
COMPONENT IDENTIFICATION<br />
High <strong>Pressure</strong><br />
Nozzle<br />
Soap Nozzle<br />
Garden Hose Inlet<br />
On/Off<br />
Switch<br />
Detergent<br />
Injector<br />
Discharge<br />
Nipple<br />
Wand<br />
Trigger<br />
Spray<br />
Gun<br />
Swivel<br />
Connector<br />
Hose<br />
Coupler<br />
Detergent<br />
Pick-up Tube<br />
High <strong>Pressure</strong><br />
Hose<br />
Detergent Bucket<br />
(not included)<br />
Detergent Injector - Allows you to siphon and mix detergents.<br />
High <strong>Pressure</strong> Hose — Connect one end to water<br />
pump discharge nipple and the other end to spray gun.<br />
Spray Gun — Controls the application of water and<br />
detergent onto cleaning surface with trigger device. Includes<br />
safety latch.<br />
Wand — Must be connected to the spray gun.<br />
Swivel Connector - Allows free range of movement to<br />
avoid coiling hoses.<br />
Note: If trigger on spray gun is released for more<br />
than 2 minutes, water will leak from valve. Warm<br />
water will discharge from pump protector onto floor.<br />
This system prevents internal pump damage.<br />
6<br />
97-713, 97-714 • REV. 2/04
Change language