MODEL: CB - Shark Pressure Washers
MODEL: CB - Shark Pressure Washers
MODEL: CB - Shark Pressure Washers
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Safety<br />
Latch<br />
High <strong>Pressure</strong><br />
Hose<br />
Spray<br />
Gun<br />
STEP 1: Attach the high<br />
pressure hose to the spray<br />
gun using teflon tape on<br />
hose threads.<br />
ASSEMBLY INSTRUCTIONS<br />
STEP 2: Insert nozzle into coupler.<br />
Outlet Fitting<br />
Nozzle<br />
Coupler<br />
STEP 3: Release the coupler collar<br />
and push the nozzle until the<br />
collar clicks. Pull the nozzle to make<br />
sure it is seated properly.<br />
PRESSURE WASHER OPERATOR’S MANUAL<br />
STEP 4: Connect garden hose to<br />
the cold water source.<br />
STEP 5: Connect the high pressure hose to the outlet discharge<br />
fitting. Push coupler collar forward until secure.<br />
Connect the garden hose to pump water inlet. Inspect<br />
inlets. CAUTION: Do not run the pump without water<br />
or pump damage will result.<br />
97-713, 97-714 • REV. 2/04<br />
7
Change language