QuickSpecs - Hewlett Packard

QuickSpecs HP CloudSystem Matrix
Technical Specifications
3. Device Bay 3 7. Device Bay 7
4. Device Bay 4 8. Device Bay 8
NOTE: Full-height servers should be populated from left to right.
Mixed Configuration - Full Height and Half-Height Population rules
The BladeSystem c7000 enclosure is divided into 4 zones by the vertical support metalwork. Within each zone a removable divider is
used to support half height devices. To install a full-height blade in any zone this divider must be removed. As a consequence a zone
can only contain either full-height server blades or half-height server blades.
NOTE: Storage blades and tape blades can be installed in the same zone as both full-height and half-height server blades, a bracket
ships with each SB40c tape blade that allows a half-height blade to be mounted on top of the tape blade.
NOTE: The lower tape or storage blade cannot be removed without first removing the upper half-height blade.
HP BladeSystem
c7000 enclosure
Dimensions Height 17.4 in (442 mm)
Width 17.6 in (447.04 mm)
Depth 32 in (813 mm)
Shipping dimensions Height 29.88 in (759 mm)
Single-phase enclosure
weight
Three -phase enclosure
NA/JPN weight
Width 23.88 in (607 mm)
Depth 39.88 in (1013 mm)
Unboxed 192 lb (87 kg)
Shipping 235 lb (106.6 kg)
Unboxed 222 lb (100.7 kg)
Shipping 265 lb (120.2 kg)
DC input enclosure weight Unboxed 151 lb (68.5 kg)
Shipping 194 lb (88 kg)
DA - 13297 North America — Version 27 — September 14, 2012 Page 30