vacuum pumps catalog (pdf 5.7mb)

[Horizontal
pumpsets]
Currently produced in various capacities and
ranges, they are made up of:
• A tank in welded steel plate having a perfect
Art.
Tank Pump A B C D E F G H I L M R
Litres Mod. Ø Ø
DO 25 25 VTL5 840 270 540 185 405 250 25 450 220 160 220 1/2”
25 VTL10 840 270 540 185 405 250 25 450 220 160 220 1/2”
DO 50 50 VTL5 985 300 620 230 465 290 30 530 240 205 300 1/2”
50 VTL10 985 300 620 230 465 290 30 530 240 205 300 1/2”
D0100 100 VTL10/F 1215 355 710 280 570 365 30 800 295 255 350 1”
100 VTL15/F 1215 355 710 280 570 365 30 800 295 255 350 1”
100 VTL20/F 1215 355 710 280 570 365 30 800 295 255 350 1”
100 MV20 1215 355 710 280 570 365 30 800 295 255 350 1”
D0150 150 VTL25/FG 1360 410 805 270 735 355 30 840 350 280 400 1”
150 VTL30/FG 1360 410 805 270 735 355 30 840 350 280 400 1”
150 VTL35/FG 1360 410 805 270 735 355 30 840 350 280 400 1”
150 MV40 1360 410 890 270 735 355 30 840 350 280 400 1”
150 VTL50/G1 1360 410 880 270 735 355 30 840 350 280 400 1”
150 MV60 1360 410 890 270 735 355 30 840 350 280 400 1”
150 VTL65/G1 1360 410 880 270 735 355 30 840 350 280 400 1”
DO 300 300 MV60 1720 510 1000 320 980 420 30 940 450 340 500 1”1/2
300 VTL65/G1 1720 510 990 320 980 420 30 940 450 340 500 1”1/2
300 MV100 1720 510 1020 320 980 420 30 940 450 340 500 1”1/2
300 VTL105/G1 1720 510 1045 320 980 420 30 940 450 340 500 1”1/2
DO 500 500 MV100 2135 530 1060 330 1355 450 30 1010 470 360 600 2”
500 VTL105/G1 2135 530 1085 330 1355 450 30 1010 470 360 600 2”
500 MV200 2135 530 1400 330 1355 450 30 1010 470 360 600 2”
500 MV300 2135 530 1400 330 1355 450 30 1010 470 360 600 2”
vacuum seal.
• A vacuum pump to be selected according to the
required suction capacity and vacuum degree.
• A vacuum switch for the adjustment of the
operative vacuum degree range.
• A vacuum gauge for direct reading of the
vacuum degree in the tank.
• A switchgear, contained in a proper tight metal
box, with magnetic starter with overload and
undervoltage protection, fuse carrier with
fuses to protect the plant, transformer for the
supply of the low voltage auxiliaries, mains
switch with pilot lamp, a switch for the
continuous or automatic operation of the
pumpset and an hour counter (starting from
the 100 litres tank).
• A manual valve for the vacuum interception.
• A drain cock for the condensate removal.
They are normally used for moving particularly
heavy or valuable loads, because in the event of
electric current failure, they allow the cups to
hold the load for a certain time after failure
(variable according to the tank capacity).
They are also recommended in multi-point
applications, to centralize vacuum. In both cases
the use of the pumpset is particularly profitable
under the point of view of the energy consumption,
because the pump starts working only when
vacuum is required by the machine.
D0 1000 1000 MV200 2350 775 1640 520 1145 685 40 1260 695 505 800 3”
1000 MV300 2350 775 1640 520 1145 685 40 1260 695 505 800 3”
[Vacuum pumps and pumpsets]
7.26
< >