Hangar and Shop - Dallas Avionics
Hangar and Shop - Dallas Avionics
Hangar and Shop - Dallas Avionics
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>Hangar</strong> <strong>and</strong> <strong>Shop</strong><br />
<strong>Avionics</strong><br />
214-320-9770 www.dallasavionics.com 800-527-2581
214-320-9770 www.dallasavionics.com 800-527-2581
KGS Inverters<br />
Whelen LED LIghts<br />
MSP Instrument Clamps<br />
Sargent Tools<br />
Annunciators<br />
Eaton<br />
Staco LED<br />
Sumitomo Termination Sleeves<br />
Laversab 6300<br />
Test Sets<br />
Michel<br />
Mobiltech<br />
S<strong>and</strong>ia Aerospace<br />
SAE5-35<br />
SAC7-35<br />
TIC<br />
T-36C<br />
TR-220<br />
angar & <strong>Shop</strong>
KGS Electronics has a full line of airborne 400Hz <strong>and</strong> 60Hz static inverters, voltage/frequency converters,<br />
DC to DC power converters, light dimming power supplies <strong>and</strong> AC to DC power supplies designed for aviation<br />
<strong>and</strong> military applications.
KGS Electronics Inverters <strong>and</strong> Converters<br />
HS200 Frequency Changer<br />
SPECIFICATIONS<br />
Input Voltage: 115/200 Vac ± 10 Vac<br />
Input Frequency: 400 Hz ± 200 Hz<br />
Output Voltage: 60 Hz ± 0.1 Hz<br />
Output Wave Form: Sine<br />
Output Phase: Single<br />
Altitude:<br />
55,000 ft<br />
Environmental: RTCA DO-160C Env. Cat. F3ZBB[ LV]<br />
E1XXXXXBXAXXXBXXX<br />
SS50 Inverter<br />
SPECIFICATIONS<br />
Input Voltage: 28VDC (nominal), 20VDC to 36.5 VDC range<br />
Output Wave Form: Sinewave/Single phase<br />
Harmonic Distortion: 0.5% (nominal)<br />
Regulation: 1% Line, 1% load, 2.5% temperature<br />
Altitude:<br />
55,000 ft<br />
Environmental: DO-160C environmental category<br />
F3ZBB(LV)XXXXXXBXAXXXZXXX<br />
Compliance: FAA TSO-C73<br />
LT53 Light Dimmer with Ext Volt Cont<br />
SPECIFICATIONS<br />
Input Voltage: 28 VDC nom., 20 to 40 VDC<br />
Output Voltage: Adjustable with external voltage from 0 to 5 VDC<br />
Regulation: 2% for line, 2% load <strong>and</strong> 2% temperature<br />
Output Ripple: 25 mVp-p<br />
Altitude:<br />
55,000 ft<br />
Temperature: -55°C to + 71°C<br />
Compliance: FAA TSO-C71<br />
SPS306B3 60 Hz Inverter<br />
SPECIFICATIONS<br />
Input Voltage: 28 VDC ± 2 volts<br />
Power Factor: 08 to 1.0<br />
Distortion: Less that 7%<br />
Wave Form: Sine wave<br />
Phase:<br />
Single<br />
Temperature: -65°F to + 160°F (-55°C to + 71°C)<br />
Altitude:<br />
55,000 ft<br />
Qualification: FAA TSO-C73
Nearly half a century ago Whelen Engineering got it’s start providing state of the art warning devices for<br />
the aviation industry. Whelen takes pride in their reputation for innovative design. With a goal to offer you<br />
field-proven, reliable <strong>and</strong> effective products that will give you superior performance, year after year Whelen<br />
makes a superior product.
Whelen Engineering LED lights<br />
70905 series LED Beacons<br />
for Rotorcraft<br />
SPECIFICATIONS<br />
Power Consumption: 0.45 amps at 28 VDC<br />
LED Color: Aviation Red<br />
Weight:<br />
1.4 lbs.<br />
Exposed Height: 4.04”<br />
Exposed Diameter: 3.66”<br />
Approvals: FAA/TSO-C96a<br />
7090501LED Beacon<br />
SPECIFICATIONS<br />
Power Consumption: 0.45 amps at 28 VDC<br />
LED Color: Aviation Red<br />
Weight:<br />
1.4 lbs.<br />
Exposed Height: 4.04”<br />
Exposed Diameter: 3.66”<br />
Approvals: FAA/TSO-C96a<br />
7090502 Strobe<br />
SPECIFICATIONS<br />
Power Consumption: 0.45 amps at 28 VDC<br />
LED Color: Aviation Red<br />
Weight:<br />
1.2 lbs.<br />
Exposed Height: 4.14”<br />
Exposed Diameter: 3.66”<br />
Approvals: FAA/TSO-C96a<br />
7090503 Beacon<br />
SPECIFICATIONS<br />
Power Consumption: 0.45 amps at 28 VDC<br />
LED Color: Aviation Red<br />
Weight:<br />
1.1 lbs.<br />
Exposed Height: 3.1”<br />
Exposed Diameter: 2.8”<br />
Approvals: FAA/TSO-C96a<br />
70875 series LED Forward<br />
Position Lights<br />
SPECIFICATIONS<br />
Power Consumption: 0.35 amps at 28 VDC<br />
LED Color: Aviation Red;<br />
Aviation Green<br />
Weight:<br />
.26 lbs.<br />
Exposed Height: 1.39”<br />
Exposed Diameter: 3.92”<br />
Approvals:<br />
FAA/TSO-C30c Type II<br />
FAA/TSO-C30c Type I<br />
Longer life ... Vibration Resistant ...<br />
Less weight ...
Instrument Clamps, Termination Sleeves<br />
MSP Clamps<br />
Used to secure avionics instruments to the<br />
instrument panel.<br />
MSP5801-A1 Round, 2.00 diameter, 1” deep<br />
MSP64294 Round, 1.152 diamter, 1/2” deep<br />
MSP64386 Round, 1.850 diameter, 1” deep<br />
MSP64311B ARINC spec 403 3 ATI-S, square, 2” deep<br />
MSP64391B101 ARINC spec 408 4 ATI-S, shelf, 7” deep<br />
MSP64624B ARINC spec 408, square, 2” deep<br />
MSP9963B ARINC spec 408 3 ATI-S, square, 1” deep<br />
MSP9964B ARINC spec 408 4 ATI-S, square, 1” deep<br />
Other styles <strong>and</strong> sizes available, call for quote
Sumitomo Termination Sleeves<br />
SUMITUBE® STS H-M <strong>and</strong> H-ML series immersion resistant shield terminators<br />
provide a rugged <strong>and</strong> environmentally sealed soldered connection which is<br />
completely insulated, encapsulated <strong>and</strong> strain-relieved. They are normally<br />
supplied with either pre-installed ground leads (H-ML Series) or no leads<br />
(H-M Series). Both series of parts offer installation which is rapid,<br />
convenient <strong>and</strong> easy.<br />
In addition to meeting MIL-Spec performance requirements of<br />
SAE-AS-83519, SUMITUBE® STS H-M <strong>and</strong> H-ML series shield<br />
terminators provide the added benefits of increased operating<br />
temperatures, choice of color coded ground leads <strong>and</strong> different<br />
ground lead types, including metal braid.
Sargent Tools, Circuit Breakers, Dzus Rail<br />
3137 CT<br />
• Crimps commercial grade butt splices.<br />
(Ref: Ref: Raychem AD 1377<br />
• Crimps are indentor type <strong>and</strong> conform to<br />
O.E.M. specifications<br />
• Crimps are produced in three cavities:<br />
26-20 AWG, 20-16 AWG <strong>and</strong> 16-12 AWG<br />
• A locator is provided to properly orient<br />
the butt splice during crimping<br />
TK2127 D-Sub Kit<br />
• 2127 CT Crimp Tool designed to crimp<br />
D-Subminiature pins <strong>and</strong> sockets to<br />
O.E.M. specifications<br />
• A locator <strong>and</strong> wire stop are provided<br />
to properly orient the contact during<br />
crimping<br />
• Commercial grade D-Subminiature pins<br />
<strong>and</strong> sockets, 100 each are stored in a<br />
recessed foam insert<br />
TK4150 Coax Kit<br />
• The 4100 frame with two mounting<br />
screws to allow easy die set change over<br />
• All dies interlock to provide perfect alignment<br />
• The die sets included in this kit are: 4100-65,<br />
4100-66, 4100-67 <strong>and</strong> 4100-69 for fiber optic<br />
<strong>and</strong> coax applications<br />
• The 8300 Easy Strip will provide two or<br />
three level stripping on RG58, 59 <strong>and</strong> 62<br />
coaxial cable
Circuit Breakers & Circuit Breaker Collars<br />
These circuit breaker collars facilitate the identification of breakers at just a<br />
glance. Greatly improves cockpit management.<br />
• Klixon<br />
• Mechanical Products<br />
• ETA<br />
• Potter & Brumfield<br />
Dzus Rail<br />
Acts as a supporting frame for the panels or removable parts to<br />
be fastened, with continuous holes for stud engagement <strong>and</strong> rivet<br />
mounting on 3/8”centers. The rail is riveted to a support member<br />
<strong>and</strong> the stud panel rests against the strip face having the stud holes.<br />
The rails are made of aluminum alloy 6061-T6 with a continuous<br />
rigid stainless steel wire Type 316, condition B, spring temper, staked<br />
across the underside of the stud holes. The fastened panel rests on<br />
the strip <strong>and</strong> it’s captive 1/4-turn studes engage the rigid wire.<br />
PR3.5 Right angle<br />
PR3.5-1 Flat<br />
PR3.5x865 Dual sided T shape
Michel Testers <strong>and</strong> Static Pitot Adapter<br />
Michel 2210 NavComm Ramp Tester<br />
The NC 2210 Tester is optimized for ramp testing of navigation<br />
<strong>and</strong> communication equipment. The unit provides test signals for<br />
marker beacon, communication, localizer, glide slope, <strong>and</strong> VOR.<br />
Also included, is a wide b<strong>and</strong> comm receiver with AGC (Automatic<br />
Gain Control) to permit evaluation of comm transmitter AM fidelity.<br />
The unit has improvements over the 2200, which it replaces. The<br />
improvements include the following:<br />
• Higher RF power<br />
• Precise localizer <strong>and</strong> glide slope deflection<br />
• Calibrated VOR bearings at 10 degree increments<br />
• Crystal controlled modulation frequencies<br />
• Longer battery life<br />
• Internal antenna with adjustable length<br />
• Smaller size<br />
Michel ATC 3300 Transponder Test Set<br />
The 3300 is designed to test ATC transponders on the bench as well<br />
as when they are installed in aircraft. As such the 3300 contains<br />
an interrogation transmitter. The intended range of the<br />
interrogation is less than 100 ft.<br />
When used for Ramp testing the interrogation signal<br />
is comprised of pulse groups (PG) transmitted at a<br />
PRF of 235 PG/S. A pulse group consists of 3 or 4<br />
pulses with a nominal width of 0.80 microseconds.
SPA Static Port Adapter Kit<br />
Your Static Port Adapter kit is adaptable to most any aircraft static port. It’s<br />
rugged <strong>and</strong> versatile construction allows it to be used even where there<br />
are obstacles <strong>and</strong>/or curvature to the aircraft skin. The spring loaded static<br />
port tube ensures constant pressure on the static port <strong>and</strong> the 3 moveable<br />
legs allow an infinite number of mounting configurations. Also, your<br />
kit is supplied with an assortment of interchangeable soft rubber<br />
vacuum cups for the static port tube which allows the user to adapt<br />
the unit to his specific size of static port. The rugged DC vacuum<br />
pump* can run for hours under load <strong>and</strong> provides plenty of suction to<br />
keep the adapter firmly secured to the aircraft skin. The pump features<br />
an “ON” annunciator light <strong>and</strong> it is protected with a 5 AMPS fuse.<br />
P/N SPA<br />
P/N SPA2 Allows for dual static testing when used with the SPA<br />
* St<strong>and</strong>by battery provides continuous operation with loss of<br />
115 AC source battery –charging circuit included.
EDSYN has spent the last 40 years learning about <strong>and</strong> responding to customers ever-changing requirements.<br />
The result is a complete line of LONER soldering products that will satisfy the needs of the marketplace <strong>and</strong><br />
provide exceptional value to our customers.
Edsyn Solder-Desolder Equipment<br />
951SX Loner Single Temperature<br />
Controlled Soldering Station<br />
• Accurate linear temperature control<br />
• Easy to maintain <strong>and</strong> calibrate<br />
• Wide variety of soldering <strong>and</strong> SMT CROWN<br />
tips available<br />
• 951SX Includes<br />
• Soldering Station<br />
• Tool Pod<br />
• Sponge Holder<br />
971 Loner High Performance<br />
Temperature Controlled Soldering<br />
Station<br />
• Direct tip-heater configuration results in quick<br />
heat-up <strong>and</strong> recovery<br />
• Fume extraction <strong>and</strong> hot air conversion kits<br />
(sold seperately) offer economy <strong>and</strong> unbeatable<br />
flexibility<br />
• Accepts a wide variety of general purpose tips<br />
• 971 Includes<br />
• Soldering Station<br />
• Tool Pod<br />
• Sponge Holder<br />
ZD500DX Soldapult Self Contained<br />
Deluxe Hot Tip Desodering Station<br />
• Powerful 70 watt high output PTC elemet<br />
makes heavy multi-layer boards easy to desolder<br />
• Adjustable h<strong>and</strong> tool design provides comfortable<br />
working angles<br />
• Powerful vacuum pulse from stored vacuum in<br />
hose, 21” Hg min<br />
• Single burn resistant cord for power <strong>and</strong> vacuum<br />
• 951SX Includes<br />
• Soldering Station<br />
• Tool Pod<br />
• Sponge Holder
The SAC 7-35 provides capabilites that usually require four different systems to perform. The SAC 7-35<br />
is TSO’d as an Altitude Encoder <strong>and</strong> provides both Gilliam Grey Code for legacy transponders <strong>and</strong> RS 232<br />
Pressure Altitude outputs for modern designs.
S<strong>and</strong>ia aerospace<br />
S<strong>and</strong>ia aerospace SAC7-35 Air Data Computer<br />
Putting Power in your Navigation System<br />
The SAC 7-35 has set the Air Data Computer st<strong>and</strong>ard for General<br />
Aviation aircraft, combining the accuracy <strong>and</strong> performance dem<strong>and</strong>ed<br />
by today’s integrated avionics systems. The addition of the SAC 7-35<br />
will unlock the powerful features your new system is capable of<br />
providing to you.<br />
• Winds Aloft<br />
• Desity Altitude<br />
• Fuel Flow<br />
• Outside Air Temperature
Introducing a new generation of STEINEL electronic heat guns. STEINEL heat guns have built a reputation<br />
for using state of the art technology to maximize precision <strong>and</strong> durability. Our new generation of heat guns<br />
incorporates exciting new features responding directly to ever increasing global requirements for rigorous,<br />
formalized quality control.
Steinel Heat Guns<br />
HL 2010 E IntelliTemp Heat Gun<br />
with LCD Temperature Display<br />
SPECIFICATIONS<br />
Temperature Continuously variable<br />
120-1150 °F<br />
Airflow<br />
Switch<br />
3.6/10.6/17.6 CFM<br />
1) Cool Air (120°F/ 3.6 CFM<br />
2) Var Temp/10.6 CFM<br />
3) Var Temp/17.6 CFM<br />
Output 1500 watts<br />
Voltage 120 VAC/60Hz<br />
Weight 30 oz<br />
Warranty Full 1-year<br />
Item Number 34821<br />
HG 2310 LCD Programmable IntelliTemp<br />
Heat Gun with LCD Display<br />
SPECIFICATIONS<br />
Temperature Continuously variable 120-1200 °F<br />
Airflow 3.6-17.6 CFM<br />
Switch 1) Cool Air (120°F/ 3.6 CFM<br />
2) Variable Temp & Airflow<br />
Programs 4 customizable pre-set temperature/<br />
airflow programs<br />
Output 1600 watts<br />
Voltage 120 VAC/60Hz<br />
Weight 33 oz<br />
Warranty Full 1-year<br />
Item Number 34831<br />
HL 1910 E Variable Temperature<br />
Electronic Heat Gun<br />
SPECIFICATIONS<br />
Temperature Continuously variable<br />
120-1100 °F<br />
Airflow<br />
Switch<br />
3.6/10.6/17.6 CFM<br />
1) 120°F/ 3.6 CFM<br />
2) Var Temp/10.6 CFM<br />
3) Var Temp/17.6 CFM<br />
Output 1500 watts<br />
Voltage 120 VAC/60Hz<br />
Weight 30 oz<br />
Warranty Full 1-year<br />
Item Number 34821
Reliability ... Lightweight ... Sunlight readability ... Night vision imaging ...<br />
LED illumination ... Spray-tight sealing ... Plug-in mounting
Eaton Switches <strong>and</strong> Annunciators<br />
Eaton Push Button<br />
Annunciator Switches<br />
Eaton 582 series Switch<br />
The 582 series is designed for use in the crew stations of commercial <strong>and</strong><br />
military aircraft, requiring a high reliability switch with superior lighting<br />
Custom Swtiches? No problem! ...<br />
2-day delivery on custom orders at no extra charge
Reliability ... Lightweight ... Sunlight readability ... Night vision imaging ...<br />
LED illumination ... Spray-tight sealing ... Plug-in mounting
Staco Switches<br />
Introducing Staco Series 90<br />
28V High Bright Voltage Dimmable LED Lighted Pushbutton Switch/Indicator<br />
The StacoSwitch Series 90 is a broad product line of rugged duty lighted pushbutton<br />
switches <strong>and</strong> indicators ... <strong>and</strong> are now available with new High Brightness White LED<br />
circuit <strong>and</strong> voltage dimmed capabilities.<br />
• Drop-in replacement for current inc<strong>and</strong>escent pushbuttons<br />
• Bright white lighting uses less power<br />
• Removable LED base is easily replaced<br />
• Voltage-dimmed version can be mixed with inc<strong>and</strong>escent<br />
lighting on the same voltage-dimming bus
RVSM checks ... Leak checks ... ADC checks ... Transponder checks ...<br />
Altimeter ... VSI ... Airspeed/Mach checks ...
Laversab Test Set<br />
Introducing Laversab 6300 Automated Pitot Static Tester<br />
The Model 6300 connects to the Pitot <strong>and</strong> Static systems of an aircraft <strong>and</strong> a lows the user to perform RVSM checks,<br />
Leak checks, ADC checks, Transponder checks, Altimeter, VSI <strong>and</strong> Airspeed/Mach checks, <strong>and</strong> a host of other checks<br />
required to be performed on the Pitot/Static system of the aircraft. The simple design of the system allows the<br />
user to operate the 6300 with minimal training. The use of built-in profiles reduces operator errors <strong>and</strong> allows the<br />
tests to be completed in a short time period.<br />
• RVSM Compliant<br />
• Reasonable cost<br />
• Easy to operate, no maintenance<br />
• Automated Pitot Static Tester for ramp/hangar use<br />
• Works with all aircraft<br />
• Calibrates all Air Data Computers <strong>and</strong> Instruments<br />
• Remote unit allows operation from cockpit<br />
• Profiles allow single-button operation<br />
• Small <strong>and</strong> light-weight, easily portable
Convienently <strong>and</strong> economically test on the bench or in the field.
MobilTech Test Set<br />
MobilTech’s best selling H.S.I.<br />
Test Set just got better!<br />
SLA55A<br />
Now you can test Bendix/King’s latest EHSI, the KI825, with MobilTech’s<br />
SLA 55A H.S.I. Test Set. The SLA 55A provides avionics shops with an<br />
economical way of testing the KCS 55A <strong>and</strong> the KI825 on the bench or<br />
in the field. The SLA 55A breakout panel allows the technician to extract<br />
or inject signals easily <strong>and</strong> efficienttly into the component being tested.<br />
Also available:<br />
SLA 6000 Audio Panel Tester<br />
SLA 1000 Total Intercom Test Sets<br />
SLA 2000 Headset Tester<br />
SLA 2000-LI (Low Impedance) Civil <strong>and</strong> Military Headset Tester
The first Test Set capable of ADS-B <strong>and</strong> TIS testing
Tel-Instrument–TIC<br />
Tel-Instrument TR-220<br />
Multi-Function Test Set<br />
The TR-220 provides test capability for Traffic <strong>and</strong> Collison Avoidance Systems (TCAS), Distance Measuring<br />
Equipment (DME), <strong>and</strong> Transponders (Modes A, C, <strong>and</strong> S). The TR-220 features state-of-the-art design technology.<br />
Microprocessor control results in easy-to-use operation that requires minimum amounts of training. Setup menu<br />
allows storage of various parameters to facilitate quick recall of test conditions.<br />
• Tests Transponder – ATCRBS <strong>and</strong> Mode S<br />
• ADS-B <strong>and</strong> TIS test features<br />
• Tests TCAS <strong>and</strong> DME<br />
• Performs test requirements per FAR Part 43 Appendix F<br />
• Meets European test requirements for Mode S Elementary <strong>and</strong> Enhanced Surveillance<br />
• Compliant witn European CE requirements<br />
• 2 year limited warranty; extended warranty available<br />
• Test Set automatically determines capability of transponder being tested<br />
(ATCRBS or Mode S) <strong>and</strong> selects appropriate tests<br />
• Test Set allows storage of 10 intruder scenarios, to simplify TCAS testing<br />
• Allows simulation of ATCRBS or Mode S intruder<br />
• Measures UUT power <strong>and</strong> frequency
Repair<br />
Cal Labs, Inc., your number one source of calibration solutions<br />
for the aviation industry, has serviced the aviation<br />
industry for over 30 years. We specialize in the calibration<br />
of avionics test sets, general test sets, <strong>and</strong> mechanical<br />
tools. We provide superior repairs, outst<strong>and</strong>ing customer<br />
service, <strong>and</strong> fast turn times. You can rest assured when<br />
chossing Cal Labs that we st<strong>and</strong> behind our words.<br />
With individual experience ranging from 9 to 35 years, our<br />
technicians are the most knowledgeable, adding to our<br />
reputation as the premier calibration lab in the industry.<br />
We can repair your test equipment faster than anybody<br />
else, <strong>and</strong> will be done right the first time. All calibrations<br />
are done in house. We do not accept any work we can’t<br />
do ourselves.<br />
All our calibration measurements are traceable to N.I.S.T.<br />
<strong>and</strong> our quality procedures comply with ANSI/NCSL<br />
Z540-1 <strong>and</strong> ISO10012. We offer free, web based, lost<br />
certification of calibration replacements. We can help<br />
manage your calibration inventory by providing access<br />
to your equipment calibration due report 30, 60, 90 days<br />
before the due date. Give us a call today for more<br />
information (800) 693-7308 or visit our website at<br />
www.callabsinc.com
214-320-9770 www.dallasavionics.com 800-527-2581
<strong>Hangar</strong> <strong>and</strong> <strong>Shop</strong><br />
<strong>Avionics</strong><br />
214-320-9770 www.dallasavionics.com 800-527-2581