Bluetooth-/USB-Interface VW / Audi 7 607 545 550 - Blaupunkt

The individual menu items can be reached by turning
the rotary button left or right.
Briefl y pressing on the rotary button opens the selected
menu. Additional settings can be made by
turning and pressing on the rotary button. OK on
the display confi rms your selection, and the successful
storing of your defi ned values.
Briefl y pressing on the red phone button calls up
the previous/higher-level menu item.
Notes:
• To avoid possible setting confl icts, you should
delete or rename the confi g.txt fi le from your
Blaupunkt directory when using an OLED display.
•
The following overview shows which settings
you can perform in your interface. The basic
factory settings are marked in grey
Which settings are active?
In the Settings menu under Settings -> Info ->
BT-USB-IF -> Confi g, the OLED display indicates
which confi guration settings are currently active.
This information can also be found in the id.txt
fi le, see the section Instructions for reading out
technical data.
Operation with PTT
Adjust the desired confi guration by loading a confi
g.txt fi le. See the section Instructions for confi guration
changes.
The following table shows the displayed
confi gurations in square brackets […].
32