are registered trademarks, the Attachmate logo is a trademark and

WINHLLAPI LANGUAGE REFERENCE
SRCHALL (default)
Scans the entire PS or field.
SRCHFROM
Starts the scan from a specified location in the PS or field.
SCRCHFRWD (default)
Performs the scan in an ascending direction.
SRCHBKWD
Performs the scan in a descending direction through the PS or field.
OIA parameters
The following session parameters affect Function 13, “Copy OIA,” and specify the
format for the data returned by the function.
OLDOIA (default)
OIA data are returned in EBCDIC. Since OIA data are always returned in ASCII
format in 5250 support, OLDOIA is accepted but ignored.
NEWOIA
OIA data are returned in ASCII format.
Pause parameters
The following session parameters affect Function 18, “Pause,” determining the type
of pause to perform.
Note: An application can make multiple Function 23 calls, and an event satisfying
any of the calls will interrupt the pause.
FPAUSE (default)
Full-duration pause. Control returns to the calling application when the number of
half-second intervals specified in the Function 18 call have elapsed.
IPAUSE
Interruptible pause; Control returns to the calling application when a system even
specified in a preceding Function 23, “Start Host Notification,” call has occurred, or
the number of half-second intervals specified in the Function 18 call have elapsed.
PS size parameters
The following session parameters affect Function 10, “Query Sessions.”
NOCFGSIZE
Function 10 returns the current size of the connected PS.
CFGSIZE (default)
Function 10 ignores any override of the PS by the host and returns the configured
size of the PS.
Prepared by Attachmate Technical Support 33