Cardwell KB 200 C.pdf - C.A.T. GmbH Consulting - Agency - Trade

Specification WO Rig KB 200C
1.0 DRILLING/WORKOVER RIG ...................................................................................... 2
2.0 MAIN CARRIER ....................................................................................................... 2
2.1 CATERPILLAR 3406 & ALLISON CLT 754DB .......................................................................... 2
3.0 TELESCOPIC MAST .................................................................................................. 3
4.0 DRAWWORKS ......................................................................................................... 3
5.0 WORKFLOOR .......................................................................................................... 4

1.0 DRILLING/WORKOVER RIG
KB 200C is a fully refurbished “back in” double stand Workover Rig capable for heavy
workover as well as medium depth drilling operations. The redesigned freestanding KB 200C
has a small footprint and a fast rig up and rig down capability. The rig was manufactured in
1997.
Dimensions in transport position:
• Length 19,10m (including mast)
• Width 2,78m
• Height 4,38m (including finger board)
2.0 MAIN CARRIER
The carrier is a custom made 8x8 with a length of 15,20m and is driven by a fully
refurbished Caterpillar 3406 combined with an Allison Transmission CLT 754DB. A Drop Box is
converting the drive from the axles to the hoisting system, which is mainly driven by a chain
compound.
Furthermore a second PTO is driving a Chelsea 852 series hydraulic pump, which powers:
• 2x2 stabilizers,
• 2x telescopic outriggers for rig up the first mast section,
• 1x hydraulic winch in the second mast part for rig up the second mast section
• 1x hydraulic auxiliary winch with a capacity of 3 t
2.1 Caterpillar 3406 & Allison CLT 754DB
The Cat 3406C is a fuel injected in-line, six-cylinder diesel engine used in a wide range of
heavy duty equipment applications. This engine is designed to resist wear and tear at high
heat levels thanks to a turbocharged after cooler and hard-faced intake/exhaust valves that
rotate three degrees with each lift to ensure proper valve seating and distribution of heat.
The 3406 with 460 BHP at 2100 rpm is a considered one of Cat's medium-sized engines
Allison CLT 754DB is a five gear pneumatic controlled transmission

3.0 TELESCOPIC MAST
The API 4F manufactured mast is refurbished and MPI tested certified.
• Height of 96ft8” (29,5m)
• Guyed wired max static hookload 275625lbs (125t) with 8 lines
• Freestand max static hookload 125t with 8 lines
• Max standpipe pressure 3000psi
• Capable of handling 2000m 5” DP
• Additional fingerboard design for
o sucker rods: 19mm, 25mm, 32mm
o Tubing: 60,3mm-114mm
4.0 DRAWWORKS
• Parmac 15 aux. Brake
• Swab drum 9000ft swab line 9/16”, mechanical brake (optional)
• Max. 300HP Input
• 4 forward, 1 reverse speed
• Crown-o-matic protection device to protect the Crown

5.0 WORKFLOOR
Dimensions: Height 3,98m, Width 4,82, Length 2,47,
Drillers Stand and Brake assembly is adjustable to the Workfloor.
This design is for Workover only. Optional a substructure light (125t load, height 4,7m) as
well as a substructure heavy (220t load, height 5,3m) including a carrier ramp can be
manufactured.