Modified resistance coefficient calculations
Modified resistance coefficient calculations
Modified resistance coefficient calculations
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Table 2: Calculation of the total <strong>resistance</strong> <strong>coefficient</strong> for the relief line from the<br />
insulating vacuum vessel to the vent isolation box; reference diameter 4.0 inch.<br />
Component<br />
Resistance Coefficient<br />
K<br />
25 feet pipe 1.28<br />
1 – standard tee<br />
(flow through branch)<br />
1 – standard tee<br />
(flow through run)<br />
1.02<br />
0.36<br />
1 - gate valve 0.31<br />
1 - 90° elbow 0.51<br />
1 – rupture disk* 1.88<br />
1 – pipe entrance 0.50<br />
1 – pipe exit 1.00<br />
TOTAL 6.86<br />
* according to manufacturer (Fike) for SR-H rupture disks