The path to simplicity - Astra Tech

Prosthetic procedures
All corresponding abutments and components of 3.5 and 4.0 diameter
implants with the small implant-abutment connection have been changed and
cannot be used with previous implants, abutments or components.
Abutment Depth Gauge mm, REF 24573
Implant Pick-up
3.5/4.0
Existing inventory of large implant-abutment connection abutments and
components can be used with all 4.5 and 5.0 diameter implants. However, it
is important to remember that the measuring system has been changed for
Healing Abutments, Direct Abutments, Abutment ST, UniAbutments, Angled
Abutments and Ball Abutments. All abutments are now measured from the
implant level.
For handling of the restorative procedure, you will need the following
instruments and components to adapt to the new implant-abutment
connection sizes:
• Abutment Depth Gauge mm
• Implant Pick-ups 3.5/4.0 – for open-tray technique
• Implant Transfers 3.5/4.0 – for closed-tray technique
Short 24426
Long 24427
NI Short 24428
NI Long 24429
Previous products
The following components and instruments are not required for prosthetic
procedures with new abutments or components and can be set aside for
caring for patients who were treated with previous products:
Product
REF
Implant Transfers
3.5/4.0
Depth Gauge Set Uni 22118
Depth Gauge Set mm 22117
Fixture Pick-up 3.5 Short 24174
Fixture Pick-up 3.5 Long 24175
Fixture Pick-up 3.5/4.0 NI Short 22867
Short 24547
Long 24548
Fixture Pick-up 3.5/4.0 NI Long 22868
Fixture Transfer 3.5 Short 22431
Fixture Transfer 3.5 Long 22472
Fixture Transfer 4.0 Short 22432
Fixture Transfer 4.0 Long 22473
8