SAFETY, HEALTH & ENVIRONMENT BULLETIN - MIRMgate

More documents

Recommendations

Info

Golden Rule 5 Mining Operations Each Mining Operation, following due consideration of its own particular risks, must have in place Codes of Practice that will cover: • A ground-control plan which must include design, implementation and monitoring aspects • The operation and maintenance of shafts and hoisting installations • The provision of ventilation to ensure the dilution of noxious and flammable gases • The prevention and control of fires and explosions • The operation and maintenance of trackless and trackbound mining equipment including men and material conveying systems Has anything changed? Are you trained and authorised to perform this work? Zero tolerance means stopping work that is unsafe Issued by the Anglo Technical Division page 44 of 47
Golden Rule 6 Lifting and Material Handling Operations must assess the risks associated with material handling utilising cranes, hoists or other mechanical lifting devices, including manual handling. Each operation must develop safety procedures that reflect due consideration of its own particular risks and require at least that these activities will not commence unless: • An assessment of the task has been completed and the method and equipment have been determined by an appropriately trained and authorised person(s) • Operators of powered lifting devices are trained and authorised • Rigging of the load is carried out by a trained and authorised person(s) • Lifting devices and equipment have been certified for use • The load does not exceed dynamic and/or static capacities of the lifting equipment • Any safety devices installed on lifting equipment are operational and are tested • Suitable tools, PPE and procedures are in place, particularly for manual material handling Has anything changed? Are you trained and authorised to perform this work? Zero tolerance means stopping work that is unsafe Issued by the Anglo Technical Division page 45 of 47
Page 1 and 2: SAFETY, HEALTH & ENVIRONMENT BULLET
Page 3 and 4: Contents 1 Introduction 2 The Desig
Page 5 and 6: Because a tailings disposal facilit
Page 7 and 8: full risk assessment should be done
Page 9 and 10: Monitoring, Checking and Corrective
Page 11 and 12: • an emergency preparedness plan
Page 13 and 14: Appendix A Overview of Existing Reg
Page 15 and 16: (Appendix C of Original Document) O
Page 17 and 18: and every three years for Category
Page 19 and 20: implementation in accordance with t
Page 21 and 22: C.6 CHILE The legislation in Chile
Page 23 and 24: made by authorities during construc
Page 25 and 26: • Bulletin 103 Tailings Dams and
Page 27 and 28: DATE AUTHORITY AUTHOR TITLE 1998 De
Page 29 and 30: MEXICO DATE AUTHORITY AUTHOR TITLE
Page 31 and 32: DATE AUTHORITY AUTHOR TITLE Eds. En
Page 33 and 34: Appendix C Extract from SANS Specif
Page 35 and 36: Appendix D Checklists for Tailings
Page 37 and 38: Good operational practices that sho
Page 39 and 40: D7 Anglo American plc Golden Rules
Page 41 and 42: Golden Rule 2 Working at Heights Op
Page 43: Golden Rule 4 Surface Vehicle Safet
Page 47 and 48: • Task completion review • Cris

SAFETY, HEALTH & ENVIRONMENT BULLETIN - MIRMgate

Create successful ePaper yourself

Delete template?

Save as template?