Bioquell Q10 - CapellaScience
Bioquell Q10 - CapellaScience
Bioquell Q10 - CapellaScience
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>Bioquell</strong> Q-10<br />
External materials of construction<br />
Temperature Operating 15°C to 30°C<br />
Storage 0°C to 35°C<br />
Relative humidity Operating 5-95% RH<br />
Storage<br />
95% RH (non-condensing)<br />
Power requirement<br />
Power supply<br />
Power consumption 230V 2760W<br />
120V<br />
1680W<br />
100V<br />
1500W<br />
Operating position<br />
<strong>Bioquell</strong> R-10<br />
Polypropylene (PP), acrylonitrile butadiene styrene (ABS), acrylonitrile<br />
butadiene styrene / polycarbonate mix (ABS/PC), aluminium (epoxy<br />
coated), stainless steel<br />
AC 230V, single phase, 50/60Hz, 12 amps<br />
AC 120V, single phase, 50/60Hz, 14 amps<br />
AC 100V, single phase, 50/60Hz, 15 amps<br />
Installation category II<br />
Upright only<br />
Dimensions (WxHxD) With Control Panel 565 x 1250 x 665mm<br />
Without Control Panel 565 x 1250 x 620mm<br />
Weight<br />
Maximum H 2<br />
O 2<br />
liquid volume<br />
H 2<br />
O 2<br />
liquid concentration<br />
Control system<br />
65 kg, including control panel (empty H 2<br />
0 2<br />
tank)<br />
4.5 litres<br />
30-35% w/w. <strong>Bioquell</strong> supply only<br />
Siemens ® S7 200PLC<br />
Airflow rate Vaporisation Injection flow 45 m 3 /hr<br />
Distribution<br />
≥800 m 3 /hr<br />
Temperature of supply vapour at outlet<br />
50-70°C<br />
H 2<br />
O 2<br />
liquid injection rate range 230V Approximately 4 - 20 g/min<br />
100V/120V<br />
Approximately 4 - 10 g/min<br />
Enclosure decontamination capacity<br />
Data printer<br />
Human interface<br />
Power cable length<br />
Control panel cable length 7.6m<br />
Locking brake<br />
External connections<br />
External materials of construction<br />
Nominally 250m 3 for rooms (subject to configuration and loading)<br />
Thermal print record<br />
Colour touch screen<br />
5m<br />
(2x) Castor lock<br />
Temperature Operating 15°C to 30°C<br />
Storage 0°C to 35°C<br />
Power requirement<br />
Power supply<br />
Power consumption 230V @ 50Hz 690W<br />
120V @ 50Hz 550W<br />
100V @ 50Hz 690W<br />
Operating position<br />
• Mains power supply • Cycle status signal digital (volt-free) output<br />
(requires voltage from external equipment) • Start/stop (run) signal<br />
24VDC input (requires volt-free connection at external equipment)<br />
• (2x) Aeration run 24VDC to external aeration units RS485 15-way<br />
sub D connector for communications (on control panel)<br />
Polypropylene (PP), acrylonitrile butadiene styrene / polycarbonate<br />
mix (ABS/PC), aluminium alloy (epoxy coated), stainless steel<br />
AC 230V, single phase, 50/60 Hz, 3.0 amps<br />
AC 120V, single phase, 50/60 Hz, 4.6 amps<br />
AC 100V, single phase, 50/60 Hz, 6.9 amps<br />
Installation category II<br />
Upright only<br />
Dimensions (WxHxD) Unit only 615 x 1200 x 580mm<br />
Weight<br />
Aeration method<br />
40 kg<br />
Airflow rate Distribution ≥800 m 3 /hr<br />
Aeration<br />
≈3000 m 3 /hr<br />
Power cable length<br />
Control cable length<br />
Locking brake<br />
External connections<br />
Patented catalyst technology<br />
5m<br />
5m<br />
(2x) Castor lock<br />
• Mains power supply • Start/stop (run) signal 24VDC input (requires<br />
volt-free connection at external equipment) • 24VDC to external aeration<br />
units (serial connection of units)<br />
086/10