2006 P&A revL - TA Instruments

Q800 DMA Accessories
991400.902 Gas Cooling Accessory - auto tank fill (CE compliant) 10,500
984350.901 Air Compressor 2,390
985011.901 Accessory Kit, Q800 (Supplied with the Q800 module) 3,420
Q800 DMA Clamp Kits
984048.901 8 mm Single / Dual Cantilever Clamp Kit 2,960
984047.901 20 mm Single / Dual Cantilever Clamp Kit 2,960
984015.901 35 mm Single / Dual Cantilever Clamp Kit (supplied with DMA Q800) 2,960
984026.901 Three-point Bending Clamp Kit (5, 10, and 15 mm lengths) 2,960
984014.901 Three-point Bending Clamp Kit (20 and 50 mm lengths) 2,960
984018.901 Parallel Plate Compression Clamp Kit (includes 15 and 40 mm plates) 4,320
984022.901 Penetration Clamp Kit 2,960
984016.901 Film / Fiber Tension Clamp Kit 2,960
984023.901 Specialty Fiber Tension Clamp Kit 2,960
984017.901 Shear Sandwich Clamp Kit 2,960
985067.901 Submersion Compression Clamp Kit 6,360
985068.901 Submersion Film / Fiber Tension Clamp Kit 8,290
985069.901 Three Point Bend Clamp Kit (50 mm, Low Friction) 3,160
985070.901 Three Point Bend Clamp Kit (20 mm, Low Friction) 3,300
984486.901 Film Cutting Kit 740
Q800 DMA Replacement Parts
984003.901 Replacement Furnace 4,710
259508.000 Brass tweezers 65
270962.001 Telescoping gage (for 10 mm single cantilever clamps) 95
270962.002 Telescoping gage (for 17 mm single cantilever clamps) 125
985199.901 Control thermocouple (90 mm length) 205
985199.902 Sample thermocouple (130 mm length) 205
984370.901 Furnace inlet ferrule / spring kit 40
270976.002 Filter / Regulator with Auto Drain 1,350
270975.001 Filter Replacement, Auto Drain Regulator 85
Q800 DMA Calibration and Test Materials
980228.902 Glass support cloth (0.2 mm thick, 33 m length) 370
982161.902 ABS sample (3.18 mm thick, 61 mm long, pkg of 5) 50
982161.903 ABS sample (3.18 mm thick, 36 mm long, pkg of 5) 50
12
982165.903 Polycarbonate sample (1.6 mm thick, 36 mm long, pkg of 5) 50
982165.904 Polycarbonate sample (0.79 mm thick, 36 mm long, pkg of 5) 50
984309.901 Polyethylene terephthalate (PET) film (pkg of 10 pieces, 38 mm long) 50
984313.901 PET fiber (910 mm long) 50
RSA III Temperature Options
403164.901 FCO Mechanical Chiller Panel 7,700
NOTE: Requires Customer to Purchase Polycold PGC 152 mechanical Chiller directly
from Polycold
700.03382.6 FCO Liquid Nitrogen Controller Option 16,300
RSA III Software
402010.901 Orchestrator Polymer Library 3,480
RSA III Advanced Options
Waveform and Fast Sampling Option
402020.951 Waveform and Fast Sampling Option Upgrade (For ARES V5, V6, or V8) 5,240
RSA III DETA: Dielectric Thermal Analysis Option
NOTE: Hewlett Packard #HP4284A LCR Meter is model provided with DETA options including a bridge. Customers must
supply this bridge if purchasing option without bridge included.
700.02903.4 RSA III Dielectric Thermal Analysis Option, Includes Bridge, 34,200
120 VAC 60 Hz
NOTE: Includes HP4284A LCR Meter and 25 mm Parallel Plates.
700.02903.5 RSA III Dielectric Thermal Analysis Tooling, Bridge Not Included, 12,600
120 VAC, 60 Hz
NOTE: Includes 25 mm Parallel Plates & Interface for customer supplied HP4284A
Bridge.
Fixtures
708.01456 Three-Point Bending Fixture 2,300
708.01446 Cantilever Bending Fixture 2,920
708.01455 Film/Fiber Fixture 2,300
708.01464 Parallel Plate Fixture 2,920
708.01466.1 8 mm Plates for Parallel Plate Fixture 500
708.01466.2 15 mm Plates for Parallel Plate Fixture 360
708.01466.3 25 mm Plates for Parallel Plate Fixture 500
708.01461 Shear Sandwich Fixture 3,200
708.01467 UV Curing Shear Sandwich Fixture 11,900
708.01465 Contact Lens Fixture 2,630
700.03649 RSA III Tension Submersion Fixture 8,160
13