Nederman Hose Reel Series 893 - Tecalemit AS

FX Extraction Arm 75
Made of light-weight anodized aluminium sections, with two or three
adjustable plastic friction joints. For extraction of fumes, etc. when
soldering, gluing, or working with solvents. Can be connected in single
applications, in systems, and with or without filter. Easily mounted to a
workbench or similar. Can be mounted standing, hanging or attached to
the wall. Flexible in all directions and simple to position. Easy to dismantle
for easy cleaning.
• Equipped with a damper close to the extraction opening
• Model for bench mounting (connection down) or wall/ceiling mounting
(connection up) available
• Also available in an ESD version, electrically conductive, for electronic
applications
• Also available in a CHEM version, for chemical applications
Capacity, m³/h 110-240
Arm Ø, mm 75
Arm length three joints, mm
1100 and1500
Temperature extracted air, °C -10 to +70
FX Extraction Arm 100
Made of light-weight anodized aluminium sections with two or three
adjustable plastic friction joints. For extraction of fumes, etc. when
soldering, gluing, or working with solvents. Can be connected in single
applications, in systems, and with or without filter. Easily mounted to a
workbench or similar. Can be mounted standing, hanging or attached to
the wall. Flexible in all directions and simple to position. Easy to dismantle
for easy cleaning.
• Equipped with a damper close to the extraction opening
• Model for bench mounting (conn. down) or wall/ceiling mounting
(conn. up) available.
• Also available in an ESD version, electrically conductive, for electronic
applications
• Available in a CHEM version, for chemical applications
Capacity, m³/h 200-500
Arm Ø, mm 100
Arm length three joints, mm 1200, 1800 and 2400
Temperature extracted air, °C -10 to +70
Accessories: see end of chapter
Product availability may differ by country
53 www.nederman.com