Nederman Hose Reel Series 893 - Tecalemit AS
Nederman Hose Reel Series 893 - Tecalemit AS
Nederman Hose Reel Series 893 - Tecalemit AS
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Extraction Kit Original 500<br />
Designed for one smaller workplace,<br />
where the demand for airflow is up<br />
to 30m³/h per arm. The kit consists<br />
of an extraction arm FX 32 with<br />
table bracket and a CX 5500 filter<br />
and fan unit. (For more information<br />
see separate product section.) One<br />
speed on/off. Complete with hose and<br />
extraction hood. The hood is made<br />
of clear plastic, which increases the<br />
visibility (not the ESD hood). Also<br />
available in an ESD version for the<br />
electronics industry.<br />
Airflow, m³/h 30<br />
Frequency, Hz 50/60<br />
Power, W 80<br />
Arm Ø, mm 32<br />
Arm length, mm 850<br />
<strong>Hose</strong> Ø, mm 32<br />
<strong>Hose</strong> length, m 1.5<br />
Weight filter and fan, kg 8.6<br />
Extraction Kit Original 1000<br />
Designed for two smaller workplaces<br />
for simultaneous use, where the<br />
demand for airflow is up to 42m³/h per<br />
arm. The kit consists of two extraction<br />
arms FX 32 with table brackets, filter<br />
unit and fan N3. (For more information<br />
see separate product section.) The<br />
speed of the fan is variably controlled<br />
by a speed controller. Complete<br />
with hoses and extraction hoods. The<br />
hood is made of clear plastic, which<br />
increases the visibility (not the ESD<br />
hood). Also available in an ESD version<br />
for the electronics industry.<br />
Airflow, m³/h 42<br />
Frequency, Hz 50/60<br />
Power, W 170<br />
Arm Ø, mm 32<br />
Arm length, mm 850<br />
<strong>Hose</strong> Ø, mm 45<br />
<strong>Hose</strong> length, m 3.0<br />
Weight filter and fan, kg 8.0<br />
Extraction Kit Original 1500<br />
Designed for three smaller workplaces<br />
for simultaneous use, where the<br />
demand for airflow is up to 38m³/h per<br />
arm. The kit consists of three extraction<br />
arms FX 32 with table brackets,<br />
filter unit and fan N3 (for more information<br />
see separate product sections).<br />
The speed of the fan is variably<br />
controlled by a speed controller. Complete<br />
with hoses and extraction hoods.<br />
The hood is made of clear plastic,<br />
which increases the visibility (not the<br />
ESD hood). Also available in an ESD<br />
version for the electronics industry.<br />
Airflow, m³/h 38<br />
Frequency, Hz 50/60<br />
Power, W 170<br />
Arm Ø, mm 32<br />
Arm length, mm 850<br />
<strong>Hose</strong> Ø, mm 45<br />
<strong>Hose</strong> length, m 3.0<br />
Weight filter and fan, kg 8.0<br />
Product availability may differ by country<br />
54 www.nederman.com