Download - Watz Hydraulik GmbH

More documents

Recommendations

Info

Sollte hier auch was stehen? FAUDI for Continental, South-East Asia Quality for any demand Germany‘s second largest tyre manufacturer, Continental AG, sees great potential in the South East Asian region. As a result, the company decided to set up a new production facility in Thailand. It has been producing components for diesel fuel injection systems there since the beginning of 2009. Continental ordered two central coolant processing systems in order to set up the new production operations. The „soft“ production area is supplied by a FAUDI FUF 22 vacuum filter unit (main filtration) and an AS 18 pre-coat filter unit (bypass filtration) while the „hard“ production area is supplied by FAUDI Type AS 34 twofold pre-coat filters (that can be extended up to fourfold). Parts made from cast metal are processed on the soft milling machines. A FAUDI vacuum filter with relatively high-quality filter fleece was chosen as the filtration solution for the machining oil, which is required in filter quality NAS 12. This ensures that high filtration quality and a filtration grade of approx. 30 μm are achieved even with new fleece, i.e. without filter cake. The pre-coat filter in the bypass also prevents very fine particles from collecting in the machining oil. In hard machining, i.e. steel grinding, a low-viscosity grinding oil with a very high filtration of contamination class NAS 6 is required as coolant. The ideal solution here is a pre-coat filter system made by FAUDI – the candle filter allows deep-bed filtration and thus a high filtration grade. The filter elements are also protected from lasting contamination through the fact that a deposit layer develops on the filter candles that is then cleanly removed thanks to a specific difference in pressure. The dirt is then finally discharged from the system in a so-called sludge treatment process. Continental sees FAUDI <strong>GmbH</strong> as a competent and reliable partner for whatever demands that have to be met. 6 | 7
Inside Filtration – The Official FAUDI Newsletter FAUDI for Continental, Eastern Europe Clean performance for a clean emulsion Eastern Europe is growing very rapidly as an automotive region. Continental AG opened a new production facility in Zvolen in the Slovak Republic in 2005 in order to keep pace with this development and to retain its international competitive edge. It is intending to expand the new factory in Zloven to become one of the largest facilities for the manufacturing and assembling of brake callipers. FAUDI equipment is increasingly being used in the location‘s 16,000 square metre production area, e.g. a coolant cleaning and supply plant with sediment tank and backflush filters. This supplies 11 cutting machines with a total capacity of 8,000 l/min. The required filtration grade is 60 μm. In order to achieve this, the feed emulsion is first pre-cleaned in a sediment tank and subsequently pumped through three selfcleaning backflush filters. These are equipped with split-pipe filter elements made from stainless steel and are backflushed by the pressure in the system using clean emulsion. The backflush liquid is then cleaned once more with a vacuum filter. This combination of various filter systems ensures safe supplies of clean emulsion to the machining equipment. Continental AG has great expectations of its location in Zvolen and puts its complete trust in products made by FAUDI.
Page 1 and 2: Issue 1 / 2009 / www.watzhydraulik.
Page 3 and 4: Inside Hydraulik - The Official WAT
Page 13 and 14: Sollte hier auch was stehen? Sollte
Page 15 and 16: Inside Filtration - The Official FA
Page 17: Inside Filtration - The Official FA

Download - Watz Hydraulik GmbH

Create successful ePaper yourself

Delete template?

Save as template?