SPRING LOADED PLUNGERS Designer's Guide - Electronic ...
SPRING LOADED PLUNGERS Designer's Guide - Electronic ...
SPRING LOADED PLUNGERS Designer's Guide - Electronic ...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>SPRING</strong> <strong>LOADED</strong> <strong>PLUNGERS</strong><br />
Designer’s <strong>Guide</strong>
<strong>SPRING</strong> <strong>LOADED</strong> <strong>PLUNGERS</strong><br />
Features & Benefits<br />
• Allow quick release of sliding parts<br />
• Function as locator or hinge pin for<br />
removable doors or drawers<br />
• Available with hold open feature<br />
Hold Open Feature<br />
KNOB<br />
PANEL<br />
Pull knob up<br />
to withdrawal<br />
stud from panel<br />
FERRULE<br />
Rotate knob<br />
90° counter<br />
clockwise to<br />
secure hold<br />
open feature<br />
To release hold<br />
open feature,<br />
rotate 90°clockwise<br />
and align panels<br />
STUD<br />
PSS - Press in<br />
PSS Part Number Callout<br />
PSS - [Feature Code]–[Finish Code]<br />
H Hold Open<br />
Z Zinc Clear Chromate<br />
N<br />
Non-Hold Open<br />
B Black Nitride<br />
Outer Panel<br />
Installation Instructions<br />
8.4 + 0.01/ - 0.1<br />
(.328 + .003/ - .000)<br />
1.6 (.060) MIN.<br />
3.8 (.150) MAX.<br />
11.5 (.45)<br />
12 (.48)<br />
Inner Panel<br />
Smooth<br />
Faced Punch<br />
6.4 + 0.1/- 0<br />
(.250) + .005/- .000<br />
13 (.50) Min.<br />
20.5 (.80)<br />
8.5 (.33)<br />
6.4 (.250)<br />
6.3 (.247)<br />
PSS - Material<br />
Knob: Steel, case hardened<br />
Spring: Stainless Steel, passivated<br />
Stud: Steel<br />
Ferrule: Steel, case hardened<br />
NOTE:<br />
1. For use in material hardness rb85 or less.<br />
2. Recommended minimum distance from edge of panel to centerline of hole is 9.6 (.375)<br />
Solid<br />
Back-up<br />
Tool<br />
(not supplied)<br />
8.5 (.33)<br />
Min. Depth<br />
*To install, press knob with approximately 3000 lbs. for steel,<br />
1500 lbs. for aluminum panels until ferrule sits flush with panel.<br />
www.matdanfasteners.com
PPL - Press in<br />
PPL Part Number Callout<br />
PPL - [Feature Code]–[Finish Code]<br />
H Hold Open<br />
Z Zinc Clear Chromate<br />
N<br />
Non-Hold Open<br />
B Black Nitride<br />
Outer Panel<br />
Installation Instructions<br />
8.4 (.328) + .003/- .000<br />
1.6 (.060) MIN.<br />
3.8 (.150) MAX.<br />
12.7 (.50)<br />
4.32 (.17)<br />
15.11 (.595)<br />
Inner Panel<br />
Smooth<br />
Faced Punch<br />
6.35 (.250) + .005/- .000<br />
13 (.5) Min.<br />
7.87 (.310)<br />
6.6 (.260)<br />
6.35 (.250)<br />
8.31 (.327)<br />
NOTE:<br />
1. For use in material hardness rb80 or less.<br />
2. Recommended minimum distance from edge<br />
of panel to centerline of hole is 8.64 (.34).<br />
PSL - Thread in<br />
PPL - Material<br />
Knob: Steel, case hardened<br />
Spring: Stainless steel, passivated<br />
Stud: Steel<br />
Ferrule: Steel, case hardened<br />
PSL Part Number Callout<br />
PSL - [Feature Code]–[Finish Code]<br />
H Hold Open<br />
N<br />
Non-Hold Open<br />
N Natural Aluminum<br />
B Black Nitride<br />
Solid<br />
Back-up<br />
Tool<br />
(not supplied)<br />
Installation Instructions<br />
Outer Panel<br />
9.12 + – .08<br />
(.359) + – .003<br />
8.1 (.32)<br />
Min. Depth<br />
*To install, press knob with approximately 4000 lbs. for steel,<br />
3000 lbs. for aluminum panels until ferrule sits flush with panel.<br />
Panel Thickness<br />
Min. 0.79 (.031)<br />
Max. 3.18 (.125)<br />
17.5 (.69)<br />
26 (1.03)<br />
Inner Panel<br />
6.35 + .08/–.03<br />
(.250) + .003/–.001<br />
Outer Panel<br />
8 (.31)<br />
6.3 (.245)<br />
Knob<br />
Assembly<br />
7 (.28)<br />
11.2 (.44)<br />
9.4 (.37)<br />
Tighten Sleeve<br />
with open-end<br />
wrench 0.8 (.03)<br />
PSL - Material<br />
Knob: 6000 Series aluminum<br />
Spring: Stainless steel, passivated<br />
Stud: Low carbon steel, case hardened<br />
Shell & Sleeve: 12L14 Steel, zinc<br />
plate, chromate plus sealer<br />
Detent Washer: 1064 Steel<br />
513.794.0500
Standard Products<br />
Press-In<br />
Installation Styles<br />
Flare-In<br />
Floating<br />
PC<br />
Board<br />
Replaces<br />
Southco ®<br />
Replaces<br />
PEM ®<br />
MC Series<br />
Retractable Captive Screws<br />
MCP<br />
MCF<br />
MCL<br />
MCB 47<br />
PF11<br />
PF12<br />
PF13<br />
PF14<br />
MP Series<br />
Retractable Captive Screws<br />
MPP<br />
MPF<br />
MPL<br />
MPB<br />
_<br />
PF30<br />
PF31<br />
PF32<br />
PF50<br />
PF60<br />
MM Series<br />
“Low Head” Miniature Retractable Screws<br />
MMP<br />
MMF<br />
MML<br />
MMB 52<br />
PFS2<br />
PFC2<br />
MS Series<br />
“High Head” Miniature Retractable Screws<br />
MSP<br />
MSF<br />
MSL<br />
MSB 52<br />
MF Series<br />
Flush Mount Captive Screws<br />
√<br />
F5<br />
PF10<br />
Spring Loaded Plungers<br />
MFL Product Series<br />
“Speed Lead” Captive Screws<br />
SLS “Speed Latch” System<br />
MTS Series<br />
“Snap-In” Captive Screws<br />
Q Series<br />
Quarter-Turn Fasteners & Receptacles<br />
√ √ √ 56<br />
09<br />
12<br />
81<br />
82<br />
85<br />
PTL2<br />
®Southco is a registered trademark of Southco, Inc. PF11, PF12, PF13, PF14, PF30, PF31, PF32, PF50, PF60, PFC, PFC2 & ®PEM<br />
are trademarks of Penn Engineering & Manufacturing Corp.<br />
Headquarters:<br />
Matdan Corporation<br />
Cincinnati, Ohio 45242, USA<br />
Tel: 513 - 794 - 0500 Fax: 513 - 794 - 0651<br />
E-mail: sales@matdanfasteners.com<br />
China Company:<br />
Matdan (Ningbo)<br />
Specialty Hardware Co., Ltd.<br />
Ningbo, Zhejiang Province, China 315803<br />
E-mail: sales_cn@matdanfasteners.com<br />
www.matdanfasteners.com<br />
Matdan, matdanfasteners.com and the Matdan logo are trademarks of the Matdan Corporation. Use allowed only with written<br />
permission from Matdan. The contents of this publication are copyrighted 2007 Matdan Corporation. All rights reserved.<br />
Copies may be obtained from the company. Published specifications are subject to change without notice.<br />
For ordering information call 513-794-0500 or E-mail: sales@matdanfasteners.com<br />
Published specifications are subject to change without notice. ©2007 Matdan Corporation. All rights reserved.<br />
SLP0407
Change language