FDB2 FIRE AND GAS DAMPER - Halton

More documents

Recommendations

Info

FDB2 Installation, operation and maintenance instructions Version: 10 Date: 19.12.2012 6.3. FD-CON-2 FIRE DAMPER SWITCH The FD-CON-2 fire damper switch is a control unit for Halton fire dampers. The control unit is installed near the damper in a place where personnel has easy and logical access to it. Two or more FD-CON-2 units can be connected in series. This allows the damper to be locally controlled from both sides of the bulkhead or deck as per SOLAS regulation. The FD-CON-2 is mainly intended for electrically operated dampers, but it can also be used for pneumatic dampers. In this case the FD-CON-2 unit controls the solenoid valve that controls the supply air to the damper actuator. 6.4. FD-CON-R ADVANCED FIRE DAMPER SWITCH The FD-CON-R advanced fire damper switch is a control unit for Halton fire dampers with remote control and monitoring functions. The control unit is installed near the damper in a place where personnel has easy and logical access to it. Two FD-CON-R units can be connected in series. This allows the damper to be locally controlled from both sides of the bulkhead or deck as per SOLAS regulation. In addition the FD-CON-R unit can be remotely controlled and monitored from a central control station. The FD-CON-R is mainly intended for electrically operated dampers, but it can also be used for pneumatic dampers. In this case the FD-CON-R unit controls the solenoid valve that controls the supply air to the damper actuator. This manual only describes the basic setup for electrical actuators. 6.5. EXTERNAL LIMIT SWITCHES (2PCS BERNSTEIN) To enable accurate remote indication of damper blade position two external micro switches and a red position indicator arrow can be mounted in to the Actuator. Mechanical features of the limit switches: Enclosure & cover: Actuator: Contact type: Mechanical life: Mounting: Connection type: Conductor cross-section: Cable entry size: Weight: Thermoplast + glassfiber Push bolt (Thermoplast) 1 NC-contact, 1 NO-contact 10x10 6 switch operations 2 x M4 4 screw connections (M3.5) Single core 0.5-1.5mm 2 /litz wire with connector sleeve 0.5-1.5mm 1 x M20x1.5 approx. 0,06kg Electrical features of the limit switches: Rated insulation voltage: U i = 250V AC Conventional thermal current: I the = 10A Max. inrush current: according to IEC 60947-5, AC 15, A300 Utilization categorie: AC 15, A300, U e /I e 240V/3A Standards: according to EN 60947-1, EN 60947-5-1 Protection class: IP65 according to EN60529, DIN VDE 0470 T1 CSA: 10A 300V AC, A300 (some polarity) Short-circuit protection: Fuse 2A gL/gG, IEC/EN 60947-5-1, appendix K Main sales office & factory Tel. +358 (0)2079 2200 Fax. +358 (0)2079 22060 http://www.haltonmarine.com Page 20 of 21
FDB2 Installation, operation and maintenance instructions Version: 10 Date: 19.12.2012 7. SPARE PART LIST Material number Short description Fire damper model 100000242SP Actuator BF120-2 HL EL 100000223SP Actuator BF230-2.1 HL EL 100000224SP Actuator BF230-T-2 HL EL 100000222SP Actuator BF24-2.1HL EL 100000225SP Actuator BF24-T-2 HL EL 100000325SP Actuator RedMax 15-F EL 100000326SP Actuator RedMax 15-SF EL 100000327SP Actuator ExMax 15-F EL 100000328SP Actuator ExMax 15-SF EL 100000108SP Actuator InMax 15-SF EL 100000101SP Linear pneumatic spring return actuator 245 N PNL 100000100SP Linear pneumatic spring return actuator 300 N PNL 100000258SP Rotating pneumatic actuator AT100 PNR 100000259SP Rotating pneumatic actuator AT100 (AISI316) PNR 100000394SP Fusible link package EL HFE 74 °C EL 100000395SP Fusible link package EL galvanized 74 °C EL 100000398SP Fusible link package SP HFE 74 °C SP 100000399SP Fusible link package SP galvanized 74 °C SP 100000397SP Fusible link package PNL 343/2 (Mecman) HFE 74 °C PNL, PNR 100000396SP Fusible link package PNL 343/2 (Mecman) galvanized 74 °C PNL, PNR 100000293SP Fusible link 144 °C ALL 100000193SP Fusible link 144 °C with fuse springs ALL 100000091SP Fusible link 100 °C ALL 100000094SP Fusible link 100 °C with fuse springs ALL 100000090SP Fusible link 74 °C ALL 100000093SP Fusible link 74 °C with fuse springs ALL 100000292SP Fusible link 72 °C ALL 100000089SP Fusible link 50 °C ALL 100000092SP Fusible link 50 °C with fuse springs ALL 100000096SP Pressure regulator PNL, PNR 100000097SP Pressure gauge PNL, PNR 100000098SP Quick exhaust valve PNL, PNR 100000086SP Explosion Proof solenoid valve 2/3 230 VDC PNL, PNR 100000085SP Explosion Proof solenoid valve 2/3 24 VDC PNL, PNR 100000084SP Solenoid valve 230 VDC PNL, PNR 100000083SP Solenoid valve 24 VDC PNL, PNR 100000060SP Junction box ABS EL, PNL, PNR 100000080SP Limit switch 188-SU1ZW (Bernstein) EL, PNL, PNR 100000081SP Explosion Proof Limit switch 07-2511-1330/63 (Bartec) EL, PNL, PNR 100000438SP FD-CON-2 Slave ALL 100000439SP FD-CON-2 Main ALL 100000440SP FD-CON-R Slave ALL 100000441SP FD-CON-R Main ALL Main sales office & factory Tel. +358 (0)2079 2200 Fax. +358 (0)2079 22060 http://www.haltonmarine.com Page 21 of 21
Page 1 and 2: FDB2 Installation, operation and ma
Page 19: FDB2 Installation, operation and ma

FDB2 FIRE AND GAS DAMPER - Halton

Create successful ePaper yourself

Delete template?

Save as template?