1974 TNT - Vintage Snow
1974 TNT - Vintage Snow
1974 TNT - Vintage Snow
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Note: Brake less than 1/8" thick<br />
must be replaced. check the stop<br />
to see if it functions after nPi;-fn,CrYli<br />
n9 bra k e a If necessary,<br />
readjust brake<br />
{M31 Steewil1C1 AdjlllstrlHmt<br />
a toe out of 1/8" to<br />
1/4". To check. measure distance betvveen<br />
each ski at front and rear of leaf<br />
The front distance should be<br />
1 to 1/4" more than the rear when the<br />
handlebar is horizontal. if<br />
is<br />
I. Unscrew the nuts the tie lads<br />
in<br />
2. Turn one or both tie rods until skis are<br />
lei to each other. (Same distance between<br />
skis at front and rear).<br />
3. Then, at front of leaf<br />
add an additional 1/16" to 1<br />
on each side by<br />
rod<br />
4. the nuts firrnlv<br />
rod. of the arm<br />
I case of serious misaliqnmerit,<br />
contact vour dealer}.<br />
Warning: The baii joil'l~ socket must<br />
fun paraliel with the<br />
The socket must be resi~ra!ilu!@<br />
tightening the tie rod end<br />
21
Change language